Silhouette SXP2 Passive Preamplifier Owners Manual
Perreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein.
i Introducing the Perreaux Silhouette Series Designed as a range of high quality, yet affordable modules; the ‘Silhouette’ series will compliment and enhance your existing system. Drawing on our extensive knowledge gained from more than a quarter of a century of developing highest quality audio products, the ‘Silhouette’ concentrates our legendary design and build quality into a compact package without sacrificing performance.
ii Important Safety Instructions Note: Please read all instructions carefully before attempting to operate your Perreaux “Silhouette” SXP2 Passive Preamplifier. ALWAYS switch off power to your system before attempting to connect or disconnect cables. ALWAYS disconnect your system from the mains before attempting to clean your unit. ALWAYS keep electrical equipment out of reach of children. ALWAYS unplug sensitive electronic equipment during electrical storms.
iii i ii iii 1 2 3 4 5 6 7 8 9 10 11 12 13 Table of Contents Introducing the Perreaux Silhouette Series .................................... 2 Important Safety Instructions ............................................................. 3 Table of Contents .................................................................................. 4 Unpacking and Placement .................................................................. 5 Instant Install ..............................................................
1 Unpacking and Placement Unpacking Procedure Note: Box Contents Placing Your SXP2 Ventilation Requirements The SXP2 is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed. Pull the foam protecting end-caps off either side of the unit and remove the black material covering. The SXP2 Passive Preamplifier is now unpacked and ready for further installation. Please retain all packaging material for future transport.
2 Instant Install If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SXP2 Passive Preamplifier. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now! Note: Please take the time to read the SXP2 manual thoroughly as it incorporates many features, which will enhance its operation.
Switch on source component Power up your source component and start your favourite recording. Turn it up Slowly increase the SXP2 volume to achieve a comfortable listening level. CONGRATULATIONS! Now that you have achieved your first objective, sit back, relax and please read the rest of the manual at your own pace in your favourite armchair whilst sipping a glass of wine. You’ll find the whole experience much more pleasurable whilst listening to music.
3 Front Panel Functions Volume Control The high-quality, machined aluminium knob reminds the user at every touch of the superior build quality designed into the SXP2. Volume control motion is smooth and accurate, providing absolute control with near infinite gain resolution. Input Selector Select one of the three source inputs via the input selector switch.
4 Rear Panel Functions Source Inputs Accepts a standard single-ended input (RCA) from source components with single-ended analogue outputs. These high quality gold plated sockets are highly conductive, corrosion resistant, and provide less potential for corrosion induced distortion. Refer to Chapter 13 “Specifications”, for detail on input impedance. Line Level Outputs This single-ended (RCA) output will provide a line level audio signal, suitable for recording, from the selected source input.
5 Minimalist Design Special Design Philosophies Perreaux has been designing and manufacturing only the highest quality audio componentry for more than a quarter of a century. Technology has continued to evolve rapidly over that time and our knowledge and application of design, materials and manufacturing techniques has advanced in tandem with this. Today’s Perreaux range comes closer to fulfilling our shared vision than at any other time in the past.
Minimalist Aesthetics Our products appeal to those who seek the ultimate in audio exclusivity, namely the perfect blend of “form and function”. “Form and function” are both tough masters. We make no excuses for producing some of the most distinctive high-end audio products on the planet. We let “form and function” blend together in perfect harmony. This surely is the essence of true minimalist utilisation.
6 Special Design Features Construction The SXP2 is stylish and unobtrusive. The front panel is made from high quality solid 6.0mm (0.2”) thick aluminium extrusion featuring our trademark machined Perreaux logo and large volume control knob. These are finished in durable and stylish satin chrome finish electroplate. The chassis and cover are both manufactured from heavy gauge steel. No cover fixing screws are visible.
Single Channel Block Diagram Ultra Short Signal path Careful attention has been paid to the signal path within the preamplifier. It is ultra short, guarded by ground planes where necessary and carefully routed to avoid contamination from external noise sources.
7 Care and Maintenance Note: Never apply liquid directly to the SXP2. Never use abrasives. Never rub in a circular motion. Cover The cover features a durable high quality powder coat finish. To remove finger marks and dirt, lightly rub the surface with a soft cloth. If the dirt is not removed, dip your cloth in a mild solution of soap and water, squeeze excess moisture from it and then gently reapply to the surface.
8 Warranty Information 1 Year Limited Warranty 3 Year Extended Warranty Obtaining Service The Perreaux SXP2 is warranted free from defects in material and workmanship under normal use for a period of 1-year (365 days) from the date of purchase.
9 Extended Warranty Registration Form Please complete this form and either fax, mail or e-mail it, along with a copy of the original receipt, to Perreaux Industries Ltd. Fax: +64 3 489 2976 Mail: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9053 New Zealand E-mail: nz.info@perreaux.com Alternatively, complete the online Warranty Registration Form on our website – www.perreaux.com.
10 Troubleshooting Guide Please use this guide if you are experiencing any problems with the SXP2 in your system. It will provide possible solutions for some given symptoms. There is no output from my system Interconnect cables not connected Make sure that the input and output interconnect cables are plugged in and are connected to the respective RCA sockets on the rear of the SXP2. Source not turned on Check that your source component is plugged in to the mains and the power is turned on.
11 Specifications The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the SXP2 reveal excellent results by any standards. Specifications in Brief Total Harmonic Distortion (THD+N): Typically...........................................................0.001%, @ 1kHz 20Hz to 20kHz.......................................
Specifications Explained THD+N .................................................................... 0.001%, @ 1kHZ Total Harmonic Distortion + Noise is the percentage of output signal which is made up of frequencies added due to harmonics of the fundamental frequency and noise. Frequency Response..................20Hz to 20kHz, +0dB -0.05dB Shows that the amplitude or strength of the output signal deviates by no more than 0.05dB over the entire audio band. Signal to Noise Ratio (unweighted)................
12 Physical Dimensions 20
13 Contact Details For more information please contact your Perreaux dealer, or contact: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9053 New Zealand Ph: Fax: +64 3 489 2975 +64 3 489 2976 E-mail: nz.info@perreaux.com Internet: www.perreaux.
Installation Notes 22
