Specification Sheet

INSTALLATION INSTRUCTIONS
INSTALLATION CONTINUED
Step 4 – Electrical Connecon
Ensure that the installaon area is dry and no water has spilled.
Connect the plug to the power socket and turn on the power socket at the switch.
The electronic instant hot water appliance display panel will now light up with
the on / o buon illuminated.
Step 5 –Electronic Instant Hot Water Appliance Operaon
Electronic Control Display Panel
ON/OFF to control the power it will also control the display ON/OFF.
Conrmaon and heang control switch
Temperature seng, 7 temperature sengs: 208°F max. 206°F; 203°F; 194°F;185°F’
176°F; 167°F
To turn on the electronic instant hot water appliance touch the buon and hold for 3
seconds unl the display lights up.
Touch the buon and press each me so that the temperature sengs will change
from 167°F to 176°F to 194°F to 185°F to 194°F to 203°F to 206°F to 208°F connue to
press ll the required temperature is seen.To conrm the temperature and start the elec-
tronic instant hot water appliance press the buon and the electronic instant hot
water appliance will start to heat up the water and an audible beep will be heard.
ConsultyourlocalHouseofRohlshowroomforadditionalinformationandspecications.Forcompletewarrantydetailsandalistofshowrooms,gotohouseofrohl.com
houseofrohl.com