Specification Sheet
INSTALLATION INSTRUCTIONS
We are delighted that you have chosen the electronic instant hot water appliance to compli-
ment your instant hot water Dispenser. This unique electronic instant hot water appliance
will save you me and eort when requiring near boiling water for making tea and coee
and we are sure you will discover many new uses each day.
Please read and follow our step by step guide to the installaon, operaon and care for the
electronic instant hot water appliance and you will soon be making that rst cup of coee or
tea from your new appliance.
WHAT YOU NEED TO KNOW BEFORE YOU START
For your safety and sasfacon please read all the instrucons, cauons and warnings be-
fore installing or using this electronic instant hot water appliance.
This electronic instant hot water appliance is not intended for commercial use
IMPORTANT NOTICE: This product can cause harm if installed incorrectly and should only be
installed by a competent person, if you feel for any reason unsure about the installation
please contact a qualified plumber or electrician to install the appliance.
Make sure all electrical wiring and connecons conform to local standards.
Make sure all water connecons conform to local standards.
Make sure all electrical wiring and water connecons conform to local codes. Standard 120v
electrical outlet is required under the sink. If possible, use a separate circuit dedicated to
your Hot Tank.
The instant hot water appliance is an open vented system appliance. The water supply
pressure should not exceed 72psi. If it does a pressure reducing valve must be installed.
The required water supply pressure is a minimum of 22psi to maximum of 72psi.
The water lter must be connected to the electronic instant hot water appliance and re-
placed every 6 months or the guarantee will be void.
Equipment Required:
Tape Measure Adjustable Wrench
ConsultyourlocalHouseofRohlshowroomforadditionalinformationandspecications.Forcompletewarrantydetailsandalistofshowrooms,gotohouseofrohl.com
houseofrohl.com