User Manual

7
English
is highest on axis and lowest at 120 to 135 degrees. To
avoid interference between multiple microphones, each
sound source shall be picked-up by one microphone,
use as less microphones as possible in one space, or
turn-on as less microphones as possible at the same
time. To reduce crosstalk between microphones, an
1:3 guide line shall be follow: The distance between
microphone A to the sound source A is "1", the distance
between any other microphone to the sound source A
shall be more than 3 times. When the (super) cardioid
microphone get closer to the sound source, the low
frequency response is boosted, as so call "proximity
eect". Experience singer takes advantages of the
proximity eect to improve the richness of his/her
voice or to increase the bass of the instrument as if an
extremely high quality equalizer is used. Same idea to
reduce the bass by increase the distance to reduce the
bass when needed. Reecting surface aect sound as
well. Beware of these surfaces such as wall, table, or
oor. Place the microphone away from the hard surfaces
or directly contact these surfaces to form a pressure
zone microphone. When using the microphone outdoor
or in windy environment, additional foam wind screen
helps to reduce wind noise. Keep grill pop screen clean
to avoid degrading the sound quality. Do not expose the
microphone at high humidity/temperature environment
to avoid damage.
90°
20-50mm
18 0°
0°
90°°
12 0 ~1 3 5° °
12 0 ~1 35° °
Monitor
Loudspeaker(s)
P.A. System
Loudspeaker(s)
Recommended
Loudspeaker Locations
Mounting the microphone
Pressure gradient microphone is very sensitive to
vibration. Suitable shock mount for high performance
microphone is necessary for extreme low noise
20200925-UG_MXD8_EN_TC.indd 7 2020/9/25 16:15