Users Manual Part 2

NO NDA REQUIRED

The export and/or the release of certain products, technology and software to non-US persons might

be subject to export restrictions. Please refer to the US export laws & regulations for details.

03EN073 Rev. M

PAGE 161 OF 176

Notes:

* Occupational/controlled exposure limits apply in situations in which persons are exposed as a con-

sequence of their employment provided those persons are fully aware of the potential for exposure

and can exercise control over their exposure. Limits for occupational/controlled exposure also apply

in situations when a person is transient through a location where occupational/controlled limits

apply provided he or she is made aware of the potential for exposure. The phrase

fully aware

in the

context of applying these exposure limits means that an exposed person has received written and/

or verbal information fully explaining the potential for RF exposure resulting from his or her employ-

ment. With the exception of

transient

persons, this phrase also means that an exposed person has

received appropriate training regarding work practices relating to controlling or mitigating his or

her exposure. Such training is not required for

transient

persons, but they must receive written and/

or verbal information and notiﬁcation (for example, using signs) concerning their exposure poten-

tial and appropriate means available to mitigate their exposure. The phrase

exercise control

means

that an exposed person is allowed to and knows how to reduce or avoid exposure by administrative

or engineering controls and work practices, such as use of personal protective equipment or time

averaging of exposure.

** Cable loss is the minimum cable loss that may exist between the antenna port and the 7.4dBi

antenna. 0.50dB cable loss was taken into consideration when calculating minimum distance.

PROFESSIONAL INSTALLER – COMPLIANCE