Users Manual Part 2

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
PAGE 64 OF 176
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
SOFTWARE SETUP: ASSIGNING IP ADDRESS AND INTERFACE NAMES
3
In the Management section, find the Node
Name field and enter the desired Node
Name.
4
In the IP Address field, enter the desired
IP Address.
6
Scroll to the bottom of the page and click
the Save & Reconfigure Unit button.
5
Enter a Netmask and Gateway, if re-
quired. Otherwise, check the Factory
Default box.
7
Wait for the page to reload.
3
4
5