Users Manual Part 2
© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might 
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 77 OF 176
USING THE WEB MANAGEMENT INTERFACE: INDIVIDUAL NODE INFO   
3
The page will display:
Firmware Version: Wave Relay
®
 firmware version 
loaded on the node
Wave Relay Model: Device model
Serial No.: Serial number of the node
Uptime: Operating time since the node was last pow-
ered on or rebooted
Temperature: Temperature of the power board, main 
board CPU, and all three RF chains
Input Power Voltage: Voltage supplied to node
Battery Status: Battery percentage remaining
Battery Temperature: Appx. temperature of battery
Real Time Clock Battery: Voltage of real-time-clock 
keep-alive battery (on units with RTC)
Current System Time: Current system time of the 
node (in both UTC and current time zone if not UTC)
Management HW MAC Address: MAC Address for 
the management hardware of the node
Radio 1 HW MAC Address: MAC Address and fre-
quency band for the RF module installed in the node
Ethernet 1 HW MAC Address: MAC Address for the 
Ethernet port in the node










