Users Manual Part 2

NO NDA REQUIRED

The export and/or the release of certain products, technology and software to non-US persons might

be subject to export restrictions. Please refer to the US export laws & regulations for details.

03EN073 Rev. M

PAGE 103 OF 176

DEVICE OPERATION: CONFIGURING VIDEO SETTINGS

Select Video Encoding Settings

Select a resolution from the Resolution

drop-down menu. This setting selects

the resolution at which video will be

encoded. Options are:

If you wish to encode audio with the

video stream, select Yes from the Audio

drop-down menu. Otherwise, select

No.

Select a frame rate from the Frame Rate drop-down menu. This setting selects the frame rate

at which video will be encoded.

Select a bit rate from the Bit Rate drop-down menu. This setting selects the bit rate at which

video will be encoded.

Note: Available frame rate and bit rate options change based on the selected resolution. If

you change resolution and the selected frame rate and bit rate settings are available for that

resolution, they will not change. If you change resolution and the selected frame rate or bit

rates settings are not available for that resolution, frame rate and bit rate will be set to the

factory default setting for that resolution.