User manual

4-42
Range
【0.1 ~ 3600.0】s
 When 05- 00 =【0】Accel /Decl 1 or 2 set by parameters 00-14/00-15 or 00-16/00-17 apply to all
speeds.
 When 05- 00 =【1】Individual Accel/Decel apply to each preset speed 0-7. Parameters 05-17 to
05-32.
 Formula for calculating acceleration and deceleration time:
Actual Acc time=
Time of Accel1 or 2 x Preset Frequency
Max Frequency
Actual Dec time=
Time of Accel1 or 2 x Preset Frequency
Max Frequency
 Maximum output frequency = parameter 01-02 when programmable V/F is selected by 01- 00=
【7】.
 Maximum output frequency = 50.00 hz or 60.00 hz when preset V/F patterns are selected.
01-
00≠【7】.
 Multi speed run/stop cycles with Individual accel/decal times. 05-00=【1】
 Two modes are shown below:-
 Mode1 = On/Off run command
 Mode2= Continuous run command
Mode1 Example: 00- 02=【1】(External Run/Stop Control).
00- 04=【1】(Operation Mode：Run/stop-forward/reverse).
S1: 03- 00=【0】(RUN/STOP );
S2: 03- 01=【1】(Forward/Reverse);
S3: 03- 02=【2】
(Preset speed 1); S4:
03- 03=【3】(Preset speed 2); S5: 03-
04=【4】(Preset speed 4);