User's Manual

2
VOLTAGE RANGE
The voltage range is 4 - 11 V and the recommended voltage range is 5 - 9 V.
Finding the perfect voltage is subjective and varies from artist to artist. Depending on the type
of work and cartridge configuration you are using, feel free to adjust anywhere between these
values to find what’s best for you.
As a general guideline, we suggest to work between 5 - 7 V for shading and 7 - 9 V for lining.
POWER PACK OVERVIEW
The Power Pack has a built-in display to show information and make it easier for the
user to control the device. It’s also the brain of this machine, allowing users to fully
configure this pen to their preference by offering features such as Voltage Presets,
Digital Give & Boost, Motion Control, Bluetooth connectivity and also compatibility
with the Pilot Wireless Footswitch.
CHARGING THE POWER PACK
It is recommended to fully charge the Power Pack before its first use for 2 - 3 hours.
The Power Pack can be charged either when turned off, stand-by or while the motor
is running.
You can use any USB - C cable and charger output (laptop, smartphone, wall outlet etc.)
but a high quality USB - C cable and power source with at least 1.5A is recommended.
USING THE POWER PACK
Attach the Power Pack on the machine (follow the engraved arrow on the back of the
machine to insert the Power Pack correctly and then rotate it to lock in place).
Long press the ON/OFF button to turn on the device.
Using the + and - buttons you can adjust the voltage, if you press & hold +/- then voltage
will increase/decrease faster.
Using the UP and DOWN buttons you can go through the Voltage Presets, the [P1] icon
displays the active preset. Presets will save both voltage and give/boost settings.
Long press the UP button to enable BOOST. Long press again to disable.
Long press the DOWN button to enable GIVE. Long press again to disable.
While the motor is running, press & hold the ON/OFF button to activate Motion Control.
While the motor is not running, press & hold the ON/OFF button to access the Settings menu.
The Power Pack shuts itself down after 1 hour of inactivity. If you want to manually
shut it down, press & hold the ON/OFF button until the screen turns off.
Prior to first use, it is recommended to fully charge the Power Pack for 2-3 hours.