Operation Manual

10
DE
GB
FR
Setup and start-up
Setting up the machine
Stow the excessive connector cord 1.
which you don’t need on the bottom
of the machine.
Place the machine on a level and sta-2.
ble base that is not sensitive to water.
The machine may not be used in
areas that are more than 1500 m
above sea level.
Pull the protective foil off of the gra-3.
ted support (4). Do not use any sharp
objects for this in order to prevent
damaging the surface.
Connect the mains plug to a socket 4.
with earthing contact.
Start-up
When using the machine for the first
time, the pump will first take in air and
emit a loud noise.
Turn on the machine using the On/Off 1.
button
(12). Shortly afterwards, the
start/stop button (16) will illuminate
in red. As the water tank is still empty,
the fill level indicator (11) will blink.
Tilt the water tank to the outside, then 2.
lift it up and out of the machine.
Remove the accessories packed in 3.
the tank.
Take out the suction cap (4. 9) and mount
it firmly on the support ring on the bot-
tom of the water tank. Ensure that the
arrow on the suction cap is pointing
towards the float capsule (8).
9 8
4
1211 16