Operation Manual

16
DE
GB
FR
Scalding hazard!
Hot steam is used for frothing.
Ensure that the milk frother (18) has been
mounted on the machine and that a con-
tainer has been placed under it.
Ensure that the milk tank is always
adequately filled. If it empties
during the frothing process, milk and
hot steam will spray out of the frother
nozzle. Place the container as close as
possible to the machine so that the milk
tube extends down to the bottom of the
container.
Set the right knob (1. 15) to the milk froth
symbol
.
As soon as the steam indicator
(13) illuminates, the machine will heat
up in order to produce steam.
Place a cup on the middle position 2.
mark of the grated support.
Set the fill amount corresponding to 3.
the size of the selected cup with the
left knob (10).
Fill the milk container with cooled milk 4.
and insert the milk tube in it.
Wait until the start/stop button 5.
(16)
illuminates in green and then press it.
The milk is sucked into the unit and
froth then runs into the cup.
If you wish to abort the process early, 6.
press the start/stop button
again.
Milk froth
1510 1613