Owner's Manual

160602
SOLVIT Products  1114 W Harris Rd #101  Arlington, TX 76001
Tel: [phone]  Email: [e-mail]  www.solvitproducts.com
SmartFit
™
Hammock Seat Cover
Care & Use Guide
Thank you for purchasing the SmartFit™ Hammock Seat Cover. This cover is designed to fit all
automotive rear seat areas with headrests.
Installation: The cover is held in place by adjustable straps which go around the two rear headrests
and the two front headrests. The straps that go over the front headrests are those next to the storage
pockets. Lay the cover in place on the rear seat, loop the straps over the headrests and adjust the
strap length for best fit.
Locate the two white plastic tubes sewn to the underside of the
cover. Push each tube into the gap between the seat back cushion
and seat bottom cushion (see Fig.1). The tubes can be removed
with a strong tug, but will hold firmly enough to keep the cover in
place under normal use.
Find the two straps sewn to the underside of the cover and pass
each under one of the front corners of the seat and connect to the
plastic adjustable anchors found on the sides of the cover (use of
these is optional and might not work on some models if the seat is
mounted to the vehicle floor).
Side vents and seatbelt “keepers”: The cover includes two side vents
with brass snap along each side and two fabric strips with hook-and-
loop tape in each upper corner. These can be used to hold a seat belt
if it is not being used (see Fig. 2). The effect of this is to better keep
the outer edges of the seat cover in place.
Seat belt slits: The cover also includes two slits which allow seat
belt buckles to pass through. These slits are oversized to fit all
vehicle configurations. If not using seat belts, we suggest stowing
the buckles under the cover and closing the flaps to keep debris from
falling through the slits.
Cleaning: Promptly wipe up any foreign matter or standing liquid. Machine wash cover in a
commercial size front-load washing machine. Use cold water with a mild detergent. Line dry.
Always make sure the cover and vehicle seat are dry before installing the seat cover.
Limited Lifetime Warranty: The Bench Seat Cover is warranted to be free from defects in materials or
workmanship for the life of the product. Some restrictions apply, so please visit our website for more details.
SOLVIT Products is dedicated to offering innovative solutions to improve pets’ quality of life.
Please feel free to contact us with any questions, comments. Thank you for your purchase!