Installation Guide

6 Customer Care Center 1-800-732-2677
Operating Guide
Step 1
Prepare the Handheld Remote
Charge the Handheld Remote
1. Lift the rubber cover protecting the Handheld Remote
Charging Jack.
2. Connect one of the charger connectors to the Handheld
Remote Charging Jack (1A).
3. Plug the charger into a standard wall outlet. The red light
will appear.
4. Charge the Handheld Remote for 24 hours for the first
charge. Recharges take only 12 hours.
Note: The Remote Indicator Light is solid green after 12
hours of charging. For the first charge, continue to charge
the Handheld Remote for an additional 12 hours.
5. When charging is completed, replace the rubber cover.
Note: Approximate battery life between charges is 40 to 60
hours, depending on frequency of use.
Remote Indicators
Condition
Dual Color LED
RED LED GREEN LED
Normal Operation OFF OFF
Normal Operation - Low Battery
Flashes three times every 5 secs. OFF
Tone A/Tone B OFF ON length of button press
Stimulation ON length of button press OFF
Program Mode - Button Held OFF ON length of button press
Program Mode - Button Released OFF Flashes mode number
Charging ON OFF
Charging Complete OFF ON
Step 2
Prepare the Receiver Collar
Charge the Receiver Collar
1. Lift the rubber cover protecting the Receiver Collar Charging Jack.
2. Connect one of the charger connectors to the Receiver Collar Charging Jack (2A).
3. Plug the charger into a standard wall outlet. The red light will appear.
4. Charge the Receiver Collar for 24 hours for the first charge. Recharges take only 12 hours.
Charger connector placed
in the Handheld Remote
Charging Jack
1A