Installation Guide

4 1-800-732-2677
Components
Installation Guide
Wall Entry Aluminum
Pet Door
™
with Flaps
Drywall
Screws
8 pcs.
Washer
8 pcs.
Template Center LocatorClosing Panel
Toggle Bolt
8 pcs.
Tools Needed
• Framing Square
• Jigsaw
• Drill
•
5
⁄
16
” (8 mm) & ½” (13 mm) Drill Bits
• Phillips Screwdriver
• Tape Measure
• Tape
• Pencil
• Level
• Scissors
• Stud Finder
NOTE: Some applications may require the Wall Entry Extension Tunnel (sold separately).
See “Replacement Parts and Accessories” on page 10.
Key Definitions
Outer Frame Size: Overall pet door dimensions
Cut-out Size: Opening cut in homeowner’s wall for proper t and pet door installation
Replacement Flap Size: Overall ap size when removed from pet door
Flap Opening Size: Usable ap space for pet to enter and exit through the pet door
Interior Frame: Pet door frame on the inside of home
Exterior Frame: Pet door frame on the outside of home