Plastic Pet Door Installation Guide for Small, Medium, Large and Extra Large Please read this entire guide before beginning.
Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Step Installation Instructions IMPORTANT If painting the pet door, it is recommended to paint it prior to the pet door being installed. For best results, use a primer for plastics before applying your paint. Step 1 Determine Pet Door Location 1A 3 1A Measure and mark your pet’s shoulder height on the door. 1B Cut Pet Door Opening 3B 3A Drill ⅜” holes in inside corners of drawn template. These will be the pilot holes for the saw blade.
Step 5 Install Pet Door Step Before putting away the jigsaw, place the interior frame (frame with the flap) inside the cut out and check the fit. Then, place the exterior frame into the underside of the door to check the fit. If frames do not fit inside the opening, you may need to recut to square opening before proceeding with installation. Helpful Tip: Tape the flap up to keep it out of the way during the installation. 6 Train Your Pet 6A Rehang your door and begin training your pet.
TERMS OF USE AND LIMITATIONS OF LIABILITY 1. Terms of Use- This product is offered to you conditioned upon your acceptance without modifications of the terms, conditions and notices contained herein. Use of this product implies acceptance of all such terms, conditions and notices. 2. Proper Use- Includes reviewing the safety information in the Installation Guide. 3.
