Installation Guide

4 1-800-732-2677
Components
Installation
Guide
Template
Interior Frame
with Flap
Exterior Frame Plastic Core
Covers
Hex Nuts
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
- X-Large 12 pcs.
Nylon Screws
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
- X-Large 12 pcs.
Snap-on
Closing Cover
Tools Needed
• Hammer
• Jigsaw
• Drill
• ⅜” Drill Bit
• Wire Cutters
• Slotted & Phillips Screwdrivers
• Masking or Painter’s Tape
• Scissors
• Pencil
• Tape Measure
• Level
• Safety Equipment
Optional
• Duct Tape
• Caulk
NOTE: The PetSafe
®
Plastic Pet Door can be installed in most doors and walls. Additional tools
and materials, such as wood framing, may be required.
Key Definitions
Outer Frame Size: Overall pet door dimensions
Cut Out Size: Opening cut in homeowner’s door for proper t and pet door installation
Replacement Flap Size: Overall ap size when removed from pet door. During extreme changes in
weather, vinyl aps can shrink during cold months and stretch in warmer months
Flap Opening Size: Usable ap size for pet to enter and exit through pet door
Interior Frame: Pet door frame on the inside of home
Exterior Frame: Pet door frame on the outside of home
Snap-on Closing Panel: Cover that snaps onto the pet door frame to close the pet door opening