Installation Guide
10 Customer Care Center 1-800-732-2677
www.petsafe.net 11
Flap Replacement Instructions
Vinyl Flap Replacement and Adjustment
During extreme changes in weather, vinyl aps can shrink during cold months and expand in warmer
months. Easily replace or adjust to ensure a snug t during seasonal changes.
3
1
2
To Replace
vinyl ap,
remove ap screws and ap
support from top of pet door
frame.
Note:
Interior ap has a
ap support, exterior ap
does not.
To Adjust
slightly loosen
ap screws on top of pet
door frame.
Remove vinyl ap and ap
clamp with attached insulated
ap.
Note:
Interior ap clamp
has insulated ap attached,
exterior ap clamp does not.
Replace ap clamp with
attached insulated ap. Insert
new vinyl ap between ap
clamp and ap screw holes in
top of frame. The PetSafe
®
logo
should be readable on vinyl
ap. Replace ap support. Align
screw holes in ap support,
frame, vinyl ap and ap clamp.
Replace and start screws to
hold ap in place. Adjust ap
horizontally until centered in
pet door frame. Adjust ap
vertically until magnet bar on
frame jumps to meet magnet
on bottom of ap. Tighten
screws.
Adjust ap horizontally until
centered in pet door frame.
Adjust ap vertically until
magnet bar on frame jumps
to meet magnet on bottom of
ap. Tighten screws.
3
To replace the insulated
ap, remove ap screws
and ap support from top
of pet door frame.
Insulated Flap Replacement
Remove vinyl ap and
ap clamp with attached
insulated ap.
Remove screws, insulated
ap and backing plate from
back of ap clamp. Insert
new insulated ap between
ap clamp back and backing
plate. Align screw holes.
Replace and tighten screws.
Follow step 3 under “Vinyl
Flap Replacement and
Adjustment” on page 10.
1
2
Part Description Part Number
Small Vinyl Replacement Flap PAC11-11037
Medium Vinyl Replacement Flap PAC11-11038
Large Vinyl Replacement Flap PAC11-11039
Small Insulated Replacement Flap Kit MPA00-12817
Medium Insulated Replacement Flap Kit MPA00-12818
Large Insulated Replacement Flap Kit MPA00-12819
Small Snap-on Closing Panel MPA00-12826
Medium Snap-on Closing Panel MPA00-12827
Large Snap-on Closing Panel MPA00-12828
Installation Hardware Kit MPA00-11824
Small Plastic Core Cover Kit MPA00-12664
Medium Plastic Core Cover Kit MPA00-12665
Large Plastic Core Cover Kit MPA00-12666
Replacement Parts and Accessories
Replacement parts can be purchased by visiting www.petsafe.net or by contacting our Customer
Care Center at 1-800-732-2677.