Wireless Pet Containment Transmitter GIF00-16917 | Product Manual FCC ID: KE3IF100A Have questions about your Wireless Fence or need training tips for your pet? Our Customer Care representatives are here to help you. Call our USA-based Customer Care Center at +1 (866) 381-2785 USA & Canada: Mon–Fri 8am–8pm EST | Sat 9am–5pm EST This product includes a one year warranty. Call, click, or chat with us before you return your product. premierpet.
Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
TABLE OF CONTENTS What’s Included 4 How It Works 4 Key Definitions 5 Set Up the Transmitter 6 Prepare the Receiver Collar 6 Adjust the Pet Area to Desired Size 8 Transmitter Range Chart 9 Record Your Settings 9 Place the Boundary Flags 9 Fit the Receiver Collar 10 Training Guide 11 Wireless - To - Go 11 FREQUENTLY ASKED QUESTIONS 12 Terms of Use and Limitation of Liability 16 Warranty 16 Perchlorate Battery 17 Battery Disposal 17 Compliance 17 Mounting T
What’s Included Receiver Collar Battery (GAC11-16351) Fence Transmitter Power Adaptor Boundary Flags (50) Long Contact Points Test Light Tool Items You May Need • • • • • • Pliers Scissors Lighter Drill & mounting hardware Tape measure Non-metallic collar and leash Set up and training help: www.premierpet.com How It Works The Premier Pet™ Wireless Fence has been proven safe, comfortable, and effective for pets over 8 lb. The system works by transmitting a radio signal up to 90 ft. in all directions.
Key Definitions Fence Transmitter: Transmits the radio signal and is the center of the pet area. Pet Area: Distance from the fence transmitter where your pet can roam freely. Boundary Zone: 2 to 3 ft. wide area outside the pet area where your pet’s receiver collar will begin to beep and then begin to deliver a static correction. PET AREA Receiver Collar: Receives the radio signal from the fence transmitter.
Set Up the Transmitter Important: You may need to move the transmitter several times before determining the final location. The fence transmitter is located at the exact center of the pet area. Place the fence transmitter: 1A 3 ft. Wall Mount Tabletop 1C amme 7 8 8 Réglage des limites Power Jack • Do not place anything on top of fence transmitter or cover any ventilation holes. This may overheat the fence transmitter and cause early transmit failure.
Set the Static Correction Level Read all steps before attempting to set the static correction level. 1. Remove the clear plastic cover with the edge of the test light tool to expose the correction level button (2C). 2. With the battery installed, press the correction level button and release when the receiver LED indicator light lights up (2D). 3. The receiver LED indicator light will emit a series of flashes representing the static correction level. 4.
Adjust the Pet Area to Desired Size 3A STREET Make sure the entire pet area lies within your property boundaries (3A). Always start determining the boundary zone at the shortest distance from fence transmitter. Place the boundary switch/range on Low (-) if the boundary zone will be less than 45 ft. from the fence transmitter. Make sure the receiver collar battery is properly installed, the static correction level is set at 2 or greater, and the test light contacts are touching the contact points (3B).
Transmitter Range Chart Boundary Control Dial Position Boundary Switch/ Range LOW (-) Boundary Switch/ Range HIGH (+) 1 5–10 ft. 5–10 ft. 2 5–10 ft. 5–10 ft. 3 15–20 ft. 25–35 ft. 4 20–25 ft. 42–55 ft. 5 25–30 ft. 55–65 ft. 6 35–40 ft. 75–85 ft. 7 40–45 ft. 85–90 ft. 8 40–45 ft. 85–90 ft.
Fit the Receiver Collar Important: The proper fit and placement of your receiver collar is important for effective training. The contact points must have direct contact with your pet’s skin on the underside of his neck. Please read the front of this guide for Important Safety Information regarding the receiver collar. To assure a proper fit, please follow these steps: 1. Make sure that the battery is not installed in the receiver collar. 2. Start with your pet standing comfortably. 3.
Training Guide • • • • Proper training of your pet is essential to the success of the system. Remove the collar after each training session. Be sure to place the collar on your dog’s neck with the Premier Pet™ logo facing up. If your pet shows signs of stress, slow down the training schedule, add additional days of training or increase the amount of play time with your pet in the pet area.
FREQUENTLY ASKED QUESTIONS Is the receiver collar waterproof? • Yes. When changing the battery, be sure to keep the battery area free from dirt and debris. Will the Premier Pet™ Wireless • You can use another Wireless fence transmitter with overlapping Fence cover a larger circle than boundaries of at least 30 ft. to increase the size of the pet area. 180 ft. across? Will a sloping yard or hills affect the pet area? • The fence transmitter signal extends 90 ft. in all directions.
FREQUENTLY ASKED QUESTIONS Can I place the receiver on another collar? • Yes. You may use any non-metallic collar. Make 2 holes in the collar to attach the receiver. Use the collar in the kit as a template to locate the holes on the new collar. Do I need to perform maintenance on my Wireless Pet Fence? • Check your pet’s neck daily for irritation from the contact points. • Check the contact points on the receiver collar weekly to make sure they are tight and clean.
TROUBLESHOOTING The receiver collar is beeping everywhere. • Check that the fence transmitter is plugged into a working standard outlet, turned on, the power light is on, and the fence transmitter controls are set at your desired settings. • Bring receiver collar while standing within 5 to 10 ft. of the fence transmitter to reset. The receiver collar is beeping inside the house. • It is recommended to remove the receiver collar from your pet when indoors to avoid activation of the receiver collar.
TROUBLESHOOTING I was setting up the pet area • You may have turned the boundary control dial down too quickly, causing and after I turned down the the receiver collar to go into power-fail mode. This is a safety feature boundary control dial, the designed to protect your pet when power to the fence transmitter goes receiver collar would no longer out. With the receiver collar while standing within 5 to 10 ft. meters of beep or correct.
Terms of Use and Limitation of Liability 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices. 2. Proper Use This Product is designed for use with pets where training is desired. The specific temperament of your pet may not work with this Product.
Perchlorate Battery Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Battery Disposal Separate collection of spent batteries is required in many regions; check the regulations in your area before discarding spent batteries. The collar receiver operates on a 6-volt lithium coin cell battery. Replace only with equivalent battery available from the Customer Care Center. For a listing of Customer Care Center telephone numbers in your area, visit www.premierpet.
+1 (866) 381-2785
Mounting Template 6.
Radio Systems Corporation 10427 PetSafe Way | Knoxville, TN 37932 | +1 (866) 381-2785 | premierpet.