Product Manual PBC00-16368 Spray Bark Collar Please read this entire Product Manual before beginning.
Welcome You and your pet were made for each other. Our aim is to help you have the best companionship and the most memorable moments together. Your PetSafe® Spray Bark Collar is designed to safely eliminate nuisance barking. We know that safe pets make happy owners. Before getting started, please take a moment to read through the important safety information. If you have any questions, please don’t hesitate to contact us.
FIRST AID TREATMENT: If inhaled, get medical attention if you feel unwell. After skin contact, rinse affected area with soap and water. After eye contact, rinse/flush eyes gently using water for 15-20 minutes. This product is not a toy. Keep it away from the reach of children. Use it only for its bark stopping purpose. Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important.
What’s Covered In the Box.............................................................................................................................................................................................. 5 How it Works...................................................................................................................................................................................... 5 Charge the Spray Bark Collar.....................................................................
In the Box Spray Bark Collar USB Charger Spray Cartridges How it Works The PetSafe® Spray Bark Collar effectively deters nuisance barking when it is worn. The sound and vibration of your dog’s bark triggers the bark sensor, which emits a burst of spray. The collar works with unscented or citronella spray. Both spray options are safe and will distract your dog and interrupt the unwanted behavior.
Add the Spray Refill Cartridge 1. 2. 3. 4. Ensure the collar is off. The refill cartridge is located on the bottom of the collar. Press and slide the button and the refill cartridge door will open (2A). Ensure the shipping cap is removed off the refill cartridge before inserting into the collar (2B). 5. Close the cartridge door (2C). 2A Do not expose the device to freezing temperatures (-32 °F or 0 °C) or to conditions warmer than 113 °F or 45 °C. Do not leave the unit in direct sunlight.
Fit the Collar Important: The proper fit and placement of the Spray Bark Collar is important for effective operation. The bark sensor must have direct contact with your dog’s skin on the underside of his neck. 1. Be sure the collar is turned off before placing it on your pet. Then with your pet standing (3A), fit the collar snugly onto your pet’s neck so that the bark sensor makes contact with your pet’s skin on the underside of his or her neck. Make sure the PetSafe® logo is right-side up (3B). 2.
Test the Collar 1. Plug the charger into the Spray Bark Collar (4A, 4B). 2. While the charger is plugged in, press and hold the on/off button. 3. Continue to hold the on/off button while unplugging the charger from the Spray Bark Collar. A yellow LED will appear. 4. Release the on/off button. After a 2 second delay, the following will begin: the Spray Bark Collar will emit a tone then release spray. Then, it will sound the normal power off tone and turn itself off.
Ensure a Proper Spray Pattern For the PetSafe® Spray Bark Collar to perform properly, the nozzle must be positioned correctly and there must be a clear path from the spray nozzle to your dog’s snout. Follow these steps: 5A 1. Make sure the PetSafe® logo on the front of the collar is upright and the spray nozzle is angled out and pointing up towards the dog’s snout (5A). 2. For long-haired dogs, it may be necessary to trim the neck hairs along the path of the spray.
FREQUENTLY ASKED QUESTIONS How old does a pet have to be before using the Spray Bark Collar? Your pet should be at least 6 months old before using the Spray Bark Collar. The collar may be too large for dogs under 8 lb. Will the Spray Bark Collar work for my dog? The Spray Bark Collar is safe and effective for most breeds and sizes of dogs, though it may be too large for dogs under 8 lb. to wear comfortably. Can I attach a leash to the Spray Bark Collar? No.
Warranty One Year Non-Transferrable Limited Warranty This product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this product and its terms can be found at www.petsafe.com. Important Recycling Advice Please respect the Waste Electrical and Electronic Equipment regulations in your country. This equipment must be recycled. At the end of the product life, do not place it in the normal municipal waste system.
THIS PRODUCT INCLUDES A “NO BARK GUARANTEE” Some dogs may not be responsive to spray correction. If the PetSafe® Spray Bark Collar is not meeting your needs, please contact our customer care team to find a product that works for you and your pet. This product also includes a one year warranty.
Important Safety Information Explanation of Attention Words and Symbols Used in this Guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Fit the Spray Bark Collar Charge the Bark Collar Tips and Maintenance Important: The proper fit and placement of your Spray Bark Collar is important for effective operation. The contact point must have direct contact with your dog’s skin on the underside of his neck. A To assure a proper fit, please follow these steps: 1. Make sure that the bark collar is turned off. 2. Start with your dog standing comfortably (A). 3.
