Product Manual A

TECHNICAL NOTICE - LOCKING CARABINERS M0002900I (110618)
4
EN
These instructions explain how to correctly use your equipment. Only
certain techniques and uses are described.
The warning symbols inform you of some potential dangers related to
the use of your equipment, but it is impossible to describe them all.
Check Petzl.com for updates and additional information.
You are responsible for heeding each warning and using your
equipment correctly. Any misuse of this equipment will create
additional dangers. Contact Petzl if you have any doubts or difficulty
understanding these instructions.
1. Field of application
This equipment is personal protective equipment (PPE) used for fall
protection.
EN 362: 2004 class B (basic), EN 12275: 2013 class B (basic) or
H (HMS).
Carabiners with manual locking (SL) or automatic locking (BL, TL, RL)
designed for activities with a risk of falls from height.
This product meets the requirements of Regulation (EU) 2016/425 on
personal protective equipment. The EU declaration of conformity is
available at Petzl.com.
This product must not be pushed beyond its limits, nor be used for
any purpose other than that for which it is designed.
Responsibility
WARNING
Activities involving the use of this equipment are
inherently dangerous.
You are responsible for your own actions, decisions and
safety.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe
injury or death.
This product must only be used by competent and responsible
persons, or those placed under the direct and visual control of a
competent and responsible person.
You are responsible for your actions, your decisions and your safety
and you assume the consequences of same. If you are not able, or
not in a position to assume this responsibility, or if you do not fully
understand the Instructions for Use, do not use this equipment.
2. Nomenclature
(1) Frame, (2) Gate, (3) Rivet, (4) Locking sleeve, (5) Keylock.
Principal materials: aluminum.
3. Inspection, points to verify
Your safety is related to the integrity of your equipment.
Petzl recommends a detailed inspection by a competent person at
least once every 12 months (depending on current regulations in
your country, and your conditions of usage). Follow the procedures
described at Petzl.com. Record the results on your PPE inspection
form: type, model, manufacturer contact info, serial number or
individual number, dates: manufacture, purchase, first use, next
periodic inspection; problems, comments, inspector’s name and
signature.
Before each use
Check that the frame, rivet, gate, and locking sleeve are free of any
cracks, deformation, or corrosion. Verify that the gate opens, and that
it closes automatically and completely. The Keylock hole must not be
blocked or plugged.
Check that the locking sleeve can be locked and unlocked.
During use
Verify that the carabiner is always loaded on the major axis.
Regularly check that the locking sleeve is locked. Avoid any pressure
or rubbing that could unlock the gate or damage the locking sleeve.
Warning: the TWIST-LOCK locking mechanism can quickly unlock
itself due to rubbing (e.g. from a rope).
It is important to regularly monitor the condition of the product and its
connections to the other equipment in the system. Make sure that all
items of equipment are correctly positioned with respect to each other.
4. Compatibility
Verify that this product is compatible with the other elements of the
system in your application (compatible = good functional interaction).
Equipment used with your connector must meet current standards in
your country (e.g. EN 354 lanyard for work).
5. Carabiner positioning
A carabiner is not indestructible.
A carabiner is strongest when loaded on its major axis, with the gate
closed. Loading a carabiner in any other way (e.g. on the minor axis or
with the gate open) is dangerous and can reduce its strength.
For more information, see the Technical tips for connectors at Petzl.
com.
6. Opening/closing
The carabiner must be used with the gate closed and the sleeve
locked.
- For the SCREW-LOCK carabiners, there is a risk of the gate opening
when the red indicator is visible. Use a manual-locking connector if you
don’t need to open and close it frequently.
- For any auto-locking carabiner, check each time you close it to make
sure it is completely locked.
7. Additional information
- In a fall arrest system, the length of the connector affects the fall
distance.
- You must have a rescue plan and the means to rapidly implement it
in case of difficulties encountered while using this equipment.
- The anchor point for the system should preferably be located above
the user’s position and should meet the requirements of the EN 795
standard (12 kN minimum strength).
- In a fall arrest system, it is essential to check the required clearance
below the user before each use, in order to avoid any impact with the
ground or with an obstacle in case of a fall.
- Make sure that the anchor point is correctly positioned, in order to
limit the risk and the length of a fall.
- A fall arrest harness is the only device allowable for supporting the
body in a fall arrest system.
- When using multiple items of equipment, a dangerous situation can
arise in which the safety function of an item of equipment can be
affected by the safety function of another item of equipment.
- WARNING - DANGER: take care that your products do not rub
against abrasive or sharp surfaces.
- Users must be medically fit for activities at height. WARNING: inert
suspension in a harness can result in serious injury or death.
- The Instructions for Use for each item of equipment used in
conjunction with this product must be followed.
- The Instructions for Use must be provided to the user of this
equipment, in the language of the country where the equipment is
used.
- Make sure the markings on the product are legible.
When to retire your equipment:
WARNING: an exceptional event can lead you to retire a product after
only one use, depending on the type and intensity of usage and the
environment of usage (harsh environments, marine environment, sharp
edges, extreme temperatures, chemicals...).
A product must be retired when:
- It has been subjected to a major fall (or load).
- It fails to pass inspection. You have any doubt as to its reliability.
- You do not know its full usage history.
- When it becomes obsolete due to changes in legislation, standards,
technique or incompatibility with other equipment...
Destroy these products to prevent further use.
Icons:
A. Unlimited lifetime - B. Acceptable temperatures - C. Usage
precautions - D. Cleaning - E. Drying - F. Storage/transport - G.
Maintenance - H. Modifications/repairs (prohibited outside of Petzl
facilities, except replacement parts) - I. Questions/contact
3-year guarantee
Against any material or manufacturing defect. Exclusions: normal wear
and tear, oxidation, modifications or alterations, incorrect storage, poor
maintenance, negligence, uses for which this product is not designed.
Warning symbols
1. Situation presenting an imminent risk of serious injury or death.
2. Exposure to a potential risk of accident or injury. 3. Important
information on the functioning or performance of your product. 4.
Equipment incompatibility.
Traceability and markings
a. Meets the requirements of the PPE regulation. Notified body
performing the EU type examination - b. Number of the notified body
responsible for the production control of this PPE - c. Traceability:
datamatrix - d. Strength - e. Serial number - f. Year of manufacture - g.
Month of manufacture - h. Batch number - i. Individual identifier - j.
Standards - k. Read the Instructions for Use carefully - l. Model
identification - m. Class B (basic) or H (HMS)
FR
Cette notice explique comment utiliser correctement votre
équipement. Seuls certains usages et techniques sont présentés.
Les panneaux d’alerte vous informent de certains dangers potentiels
liés à l’utilisation de votre équipement, mais il est impossible de tous
les décrire. Prenez connaissance des mises à jour et informations
complémentaires sur Petzl.com.
Vous êtes responsable de la prise en compte de chaque alerte et de
l’usage correct de votre équipement. Toute mauvaise utilisation de cet
équipement sera à l’origine de dangers additionnels. Contactez Petzl
si vous avez des doutes ou des difficultés de compréhension.
1. Champ d’application
Équipement de protection individuelle (EPI) contre les chutes de
hauteur.
EN 362 : 2004 classe B (base), EN 12275 : 2013 classe B (base)
ou H (HMS).
Mousquetons à verrouillage manuel (SL) ou automatique (BL, TL, RL)
destinés aux activités présentant un risque de chute de hauteur.
Ce produit est conforme au règlement (UE) 2016/425 relatif aux
équipements de protection individuelle. La déclaration de conformité
UE est disponible sur Petzl.com.
Ce produit ne doit pas être sollicité au-delà de ses limites ou dans
toute autre situation que celle pour laquelle il est prévu.
Responsabilité
ATTENTION
Les activités impliquant l’utilisation de cet équipement
sont par nature dangereuses.
Vous êtes responsable de vos actes, de vos décisions et
de votre sécurité.
Avant d’utiliser cet équipement, vous devez :
- Lire et comprendre toutes les instructions d’utilisation.
- Vous former spécifiquement à l’utilisation de cet équipement.
- Vous familiariser avec votre équipement, apprendre à connaître ses
performances et ses limites.
- Comprendre et accepter les risques induits.
Le non-respect d’un seul de ces avertissements peut être
la cause de blessures graves ou mortelles.
Ce produit ne doit être utilisé que par des personnes compétentes
et avisées ou placées sous le contrôle visuel direct d’une personne
compétente et avisée.
Vous êtes responsable de vos actes, de vos décisions et de votre
sécurité et en assumez les conséquences. Si vous n’êtes pas en
mesure d’assumer cette responsabilité, ou si vous n’avez pas bien
compris les instructions d’utilisation, n’utilisez pas cet équipement.
2. Nomenclature
(1) Corps, (2) Doigt, (3) Rivet, (4) Bague de verrouillage, (5) Keylock.
Matériaux principaux : aluminium.
3. Contrôle, points à vérifier
Votre sécurité est liée à l’intégrité de votre équipement.
Petzl conseille une vérification approfondie, par une personne
compétente, au minimum tous les 12 mois (en fonction de la
réglementation en vigueur dans votre pays et de vos conditions
d’utilisation). Respectez les modes opératoires décrits sur le site
Petzl.com. Enregistrez les résultats sur la fiche de vie de votre EPI :
type, modèle, coordonnées du fabricant, numéro de série ou numéro
individuel, dates : fabrication, achat, première utilisation, prochains
examens périodiques, défauts, remarques, nom et signature du
contrôleur.
Avant toute utilisation
Vérifiez l’absence de fissures, déformations, corrosion, usure (sur
le corps, rivet, doigt et la bague). Vérifiez l’ouverture et la fermeture
automatique complète du doigt. Le trou du Keylock ne doit pas être
encombré ou bouché.
Vérifiez le verrouillage et déverrouillage de la bague.
Pendant l’utilisation
Vérifiez que le mousqueton travaille toujours selon le grand axe.
Surveillez régulièrement le verrouillage de la bague. Évitez toute
pression, ou frottement, qui pourrait provoquer un déverrouillage du
doigt ou endommager la bague.
Attention, le verrouillage TWIST-LOCK peut s’ouvrir rapidement lors de
frottements, par exemple au passage de corde.
Il est important de contrôler régulièrement l’état du produit et de ses
connexions avec les autres équipements du système. Assurez-vous
du bon positionnement des équipements les uns par rapport aux
autres.
4. Compatibilité
Vérifiez la compatibilité de ce produit avec les autres éléments du
système dans votre application (compatibilité = bonne interaction
fonctionnelle).
Les éléments utilisés avec votre connecteur doivent être conformes
aux normes en vigueur dans votre pays (longe EN 354 pour le travail,
par exemple).
5. Positionnement du mousqueton
Un mousqueton n’est pas indestructible.
Un mousqueton offre la résistance maximum dans le grand axe et
doigt fermé. Solliciter un mousqueton de toute autre manière est
dangereux et réduit sa résistance, par exemple dans le petit axe ou
doigt ouvert.
Pour plus d’informations, consultez les Conseils techniques sur les
connecteurs sur Petzl.com.
6. Ouverture/fermeture
Le mousqueton doit être utilisé doigt fermé et bague verrouillée.
- Pour les mousquetons SCREW-LOCK, risque d’ouverture du doigt
lorsque le témoin rouge est visible. Utilisez un connecteur à verrouillage
manuel si vous n’avez pas à l’ouvrir et le fermer fréquemment.
- Pour les mousquetons à verrouillage automatique, vérifiez que le
verrouillage est complet à chaque fermeture.
7. Informations complémentaires
- Dans un système d’arrêt des chutes, la longueur du connecteur
influe sur la hauteur de chute.
- Prévoyez les moyens de secours nécessaires pour intervenir
rapidement en cas de difficultés.
- L’amarrage du système doit être de préférence situé au-dessus de la
position de l’utilisateur et répondre aux exigences EN 795 (résistance
minimum 12 kN).
- Dans un système d’arrêt des chutes, il est essentiel de vérifier
l’espace libre requis sous l’utilisateur, avant chaque utilisation, afin
d’éviter toute collision avec le sol, ou un obstacle, en cas de chute.
- Veillez à ce que le point d’amarrage soit correctement positionné,
afin de limiter le risque et la hauteur de chute.
- Un harnais d’antichute est le seul dispositif de préhension du corps
qu’il soit permis d’utiliser dans un système d’arrêt des chutes.
- Un danger peut survenir lors de l’utilisation de plusieurs équipements
dans laquelle la fonction de sécurité de l’un des équipements peut être
affectée par la fonction de sécurité d’un autre équipement.
- ATTENTION DANGER, veillez à ce que vos produits ne frottent pas
sur des matériaux abrasifs ou pièces coupantes.
- Les utilisateurs doivent être médicalement aptes aux activités en
hauteur. ATTENTION, être suspendu et inerte dans un harnais peut
déclencher des troubles physiologiques graves ou la mort.
- Les instructions d’utilisation définies dans les notices de chaque
équipement associé à ce produit doivent être respectées.
- Les instructions d’utilisation doivent être fournies à l’utilisateur de cet
équipement dans la langue du pays d’utilisation.
- Assurez-vous de la lisibilité des marquages sur le produit.
Mise au rebut :
ATTENTION, un événement exceptionnel peut vous conduire à rebuter
un produit après une seule utilisation (type et intensité d’utilisation,
environnements d’utilisation : milieux agressifs, milieux marins, arêtes
coupantes, températures extrêmes, produits chimiques...).
Un produit doit être rebuté quand :
- Il a subi une chute ou un effort important.
- Le résultat des vérifications du produit n’est pas satisfaisant. Vous
avez un doute sur sa fiabilité.
- Vous ne connaissez pas son historique complet d’utilisation.
- Quand son usage est obsolète (évolution législative, normative,
technique ou incompatibilité avec d’autres équipements...).
Détruisez ces produits pour éviter une future utilisation.
Pictogrammes :
A. Durée de vie illimitée - B. Températures tolérées - C.
Précautions d’usage - D. Nettoyage - E. Séchage - F. Stockage/
transport - G. Entretien - H. Modifications/réparations (interdites
hors des ateliers Petzl, sauf pièces de rechange) - I. Questions/
contact
Garantie 3 ans
Contre tout défaut de matière ou fabrication. Sont exclus : usure
normale, oxydation, modifications ou retouches, mauvais stockage,
mauvais entretien, négligences, utilisations pour lesquelles ce produit
n’est pas destiné.
Panneaux d’alerte
1. Situation présentant un risque imminent de blessure grave ou
mortelle. 2. Exposition à un risque potentiel d’incident ou de blessure.
3. Information importante sur le fonctionnement ou les performances
de votre produit. 4. Incompatibilité matérielle.
Traçabilité et marquage
a. Conforme aux exigences du règlement EPI. Organisme notifié
pour l’examen UE de type - b. Numéro de l’organisme notifié pour
le contrôle de production de cet EPI - c. Traçabilité : datamatrix - d.
Résistance - e. Numéro individuel - f. Année de fabrication - g. Mois de
fabrication - h. Numéro de lot - i. Identifiant individuel - j. Normes - k.
Lire attentivement la notice technique - l. Identification du modèle - m.
Classe B (base) ou H (HMS)
DE
In dieser Gebrauchsanweisung wird erklärt, wie Sie Ihr Produkt richtig
verwenden. Es werden nur einige der Techniken und Verwendungen
dargestellt.
Die Warnhinweise informieren Sie über gewisse mögliche Gefahren
bezüglich der Verwendung Ihres Produkts. Es ist jedoch nicht möglich,
alle erwägbaren Fälle zu beschreiben. Bitte nehmen Sie Kenntnis von
den Aktualisierungen und zusätzlichen Informationen auf Petzl.com.
Sie sind für die Beachtung der Warnhinweise und für die sachgemäße
Verwendung Ihres Produkts verantwortlich. Jede fehlerhafte
Verwendung des Produkts bedeutet eine zusätzliche Gefahrenquelle.
Wenn Sie Zweifel haben oder etwas nicht richtig verstehen, wenden
Sie sich bitte an Petzl.
1. Anwendungsbereich
Persönliche Schutzausrüstung (PSA) zum Schutz gegen Absturz.
EN 362: 2004 Klasse B (Basismodell), EN 12275: 2013 Klasse B
(Basismodell) oder H (HMS).
Karabiner mit manuellem Schraubverschluss (SL) oder automatischer
Verriegelung (BL, TL, RL) für Aktivitäten, bei denen ein Absturzrisiko
besteht.
Das Produkt entspricht der PSA-Verordnung (EU) 2016/425. Die EU-
Konformitätserklärung ist auf Petzl.com verfügbar.
Dieses Produkt darf nicht über seine Grenzen hinaus belastet werden.
Es darf ausschließlich zu dem Zweck verwendet werden, für den es
entworfen wurde.
Haftung
WARNUNG
Aktivitäten, bei denen diese Ausrüstung zum Einsatz
kommt, sind naturgemäß gefährlich.
Für Ihre Handlungen, Entscheidungen und für Ihre
Sicherheit sind Sie selbst verantwortlich.
Vor dem Gebrauch dieser Ausrüstung müssen Sie:
- Die Gebrauchsanleitung vollständig lesen und verstehen.
- Fachgerecht zur richtigen Benutzung der Ausrüstung ausgebildet
sein.
- Sich mit Ihrer Ausrüstung vertraut machen, die Möglichkeiten und
Einschränkungen kennen lernen.
- Die mit dem Einsatz verbundenen Risiken verstehen und akzeptieren.
Die Nichtberücksichtigung auch nur einer dieser
Warnungen kann zu schweren Verletzungen oder sogar
Tod führen.
Dieses Produkt darf nur von kompetenten und besonnenen Personen
verwendet werden oder von Personen, die unter der direkten Aufsicht
und visuellen Kontrolle einer kompetenten und besonnenen Person
stehen.
Sie sind für Ihre Handlungen, Entscheidungen und für Ihre Sicherheit
verantwortlich und tragen die Konsequenzen. Wenn Sie nicht in der
Lage sind, diese Verantwortung zu übernehmen, oder wenn Sie die
Gebrauchshinweise nicht richtig verstanden haben, benutzen Sie diese
Ausrüstung nicht.
2. Benennung der Teile
(1) Körper, (2) Schnapper, (3) Niete, (4) Verriegelungshülse, (5) Keylock.
Material: Aluminium.
3. Überprüfung, zu kontrollierende
Punkte
Ihre Sicherheit hängt vom Zustand Ihrer Ausrüstung ab.
Petzl empfiehlt, mindestens alle 12 Monate (entsprechend den in Ihrem
Land geltenden Vorschriften und den Nutzungsbedingungen) eine
eingehende Überprüfung durch eine kompetente Person durchführen
zu lassen. Bitte beachten Sie die auf Petzl.com beschriebenen
Vorgehensweisen. Tragen Sie die Ergebnisse in den Prüfbericht
Ihrer PSA ein: Typ, Modell, Kontaktinformation des Herstellers,
Seriennummer oder individuelle Nummer, Daten: Herstellung, Kauf,
erste Anwendung, nächste regelmäßige Überprüfung, Probleme,
Bemerkungen, Name und Unterschrift des Prüfers.
Vor jedem Einsatz
Vergewissern Sie sich, dass Körper, Niete, Schnapper
und Verriegelungshülse keine Risse, Deformierungen oder
Korrosionserscheinungen aufweisen. Überprüfen Sie das Öffnen und
automatische Schließen des Schnappers. Der Keylock-Schlitz darf
nicht blockiert oder verstopft sein.
Überprüfen Sie die Ver- und Entriegelung der Hülse.
Während des Gebrauchs
Vergewissern Sie sich, dass der Karabiner immer in der Längsachse
belastet wird.
Kontrollieren Sie die Verriegelung der Hülse in regelmäßigen
Abständen. Vermeiden Sie jeglichen Druck oder Reibung, da dies
zur Entriegelung des Schnappers bzw. zur Beschädigung der
Verriegelungshülse führen könnte.
Warnung, die TWIST-LOCK-Verriegelung kann sich bei Reibung, z.B.
durch Scheuern des durchlaufenden Seils, leicht öffnen.
Es ist unerlässlich, den Zustand des Produkts und seiner
Verbindungen mit anderen Ausrüstungsgegenständen im System
regelmäßig zu überprüfen. Stellen Sie stets sicher, dass die einzelnen
Ausrüstungsgegenstände im System richtig zueinander positioniert
sind.
4. Kompatibilität
Überprüfen Sie die Kompatibilität dieses Produkts mit den
anderen Elementen Ihres Systems (Kompatibilität = funktionelles
Zusammenspiel).
Die mit Ihrem Verbindungselement verwendeten Ausrüstungselemente
müssen mit den in Ihrem Land geltenden Normen übereinstimmen
(z.B. Verbindungsmittel EN 354 für den Arbeitseinsatz).
5. Positionierung des Karabiners
Ein Karabiner ist nicht unzerstörbar.
Ein Karabiner weist die maximale Bruchlast in der Längsachse und
bei geschlossenem Schnapper auf. Jede andere Belastung (z.B.
Querbelastung oder bei offenem Schnapper) reduziert die Bruchlast
des Karabiners und ist daher gefährlich.
Für weitere Informationen verweisen wir auf die Product Experience für
Verbindungselemente auf Petzl.com.
6. Öffnen/Schließen
Der Karabiner muss mit geschlossenem Schnapper und verriegelter
Hülse verwendet werden.
- Wenn bei den SCREW-LOCK-Karabinern die rote Markierung
sichtbar ist, besteht das Risiko, dass sich der Schnapper öffnet. Wenn
ein häufiges Öffnen und Schließen des Karabiners nicht erforderlich ist,
benutzen Sie einen Karabiner mit manuellem Schraubverschluss.
- Überprüfen Sie bei Karabinern mit automatischer Verriegelung bei
jedem Schließvorgang, dass die Hülse vollständig verriegelt ist.
7. Zusätzliche Informationen
- Bei einem Auffangsystem muss die Länge des Verbindungselements
berücksichtigt werden, da diese die Sturzhöhe beeinflusst.
- Der Benutzer muss für eventuelle Schwierigkeiten, die während der
Anwendung dieses Produkts auftreten können, Rettungsmöglichkeiten
planen.
- Der Anschlagpunkt des Systems muss oberhalb des Benutzers
angebracht sein und den Anforderungen der Norm EN 795
entsprechen. Die Mindestbruchlast des Anschlagpunktes muss 12
kN betragen.
- In einem Auffangsystem ist vor jeder Benutzung sicherzustellen,
dass genügend Sturzraum unter dem Anwender vorhanden ist,
so dass er im Falle eines Sturzes nicht auf den Boden oder auf ein
Hindernis schlägt.
- Achten Sie darauf, dass der Anschlagpunkt richtig platziert ist, um
das Risiko und die Höhe eines Sturzes zu reduzieren.
- In einem Auffangsystem ist zum Halten des Körpers ausschließlich
ein Auffanggurt zulässig.
- Werden mehrere Ausrüstungsgegenstände zusammen
verwendet, kann es zu gefährlichen Situationen kommen, wenn
die Sicherheitsfunktion eines Gegenstands durch einen anderen
Ausrüstungsgegenstand behindert wird.
- ACHTUNG GEFAHR: Achten Sie darauf, dass die Produkte nicht an
rauen Materialien oder scharfkantigen Gegenständen reiben.
- Anwender müssen für Aktivitäten in der Höhe gesundheitlich in
guter Verfassung sein. WARNUNG, das regungslose Hängen in
einem Gurt kann zu schweren Verletzungen oder sogar Tod führen
(Hängetrauma!).
- Die Gebrauchsanleitungen für jeden Ausrüstungsgegenstand, der
zusammen mit diesem Produkt verwendet wird, müssen unbedingt
befolgt werden.
- Die Gebrauchsanleitungen in Landessprache müssen allen
Benutzern dieser Ausrüstung zur Verfügung gestellt werden.
- Vergewissern Sie sich, dass die Markierungen auf dem Produkt
lesbar sind.
Aussondern von Ausrüstung:
ACHTUNG, außergewöhnliche Umstände können die Aussonderung
eines Produkts nach einer einmaligen Anwendung erforderlich machen
(Art und Intensität der Benutzung, Anwendungsbereich: aggressive
Umgebungen, Meeresklima, scharfe Kanten, extreme Temperaturen,
Chemikalien usw.).
In folgenden Fällen muss ein Produkt ausgesondert werden:
- Nach einem schweren Sturz (oder Belastung).
- Das Überprüfungsergebnis ist nicht zufriedenstellend, das Produkt
fällt bei der Überprüfung durch. Sie bezweifeln seine Zuverlässigkeit.
- Die vollständige Gebrauchsgeschichte ist nicht bekannt.
- Das Produkt ist veraltet (Änderung der gesetzlichen Bestimmungen,
der Normen und der technischen Vorschriften, Inkompatibilität mit
anderen Ausrüstungsgegenständen usw.).
Zerstören und entsorgen Sie diese Produkte, um ihren weiteren
Gebrauch zu verhindern.
Zeichenerklärungen:
A. Unbegrenzte Lebensdauer - B. Temperaturbeständigkeit
- C. Vorsichtsmaßnahmen - D. Reinigung - E. Trocknung - F.
Lagerung/Transport - G. Pflege - H. Änderungen/Reparaturen
(außerhalb der Petzl Betriebsstätten nicht zulässig, ausgenommen
Ersatzteile) - I. Fragen/Kontakt
3 Jahre Garantie
Auf Material- und Fabrikationsfehler. Von der Garantie ausgeschlossen
sind: normale Abnutzung, Oxidation, Änderungen oder
Nachbesserungen, unsachgemäße Lagerung, unsachgemäße
Wartung, Nachlässigkeiten und Anwendungen, für die das Produkt
nicht bestimmt ist.
Warnhinweise
1. Unmittelbare Verletzungs- oder Lebensgefahr. 2. Potenzielles
Unfall- oder Verletzungsrisiko. 3. Wichtige Information über die
Funktionsweise oder die Leistungsangaben Ihres Produkts. 4.
Inkompatibilität zwischen Ausrüstungsgegenständen.
Rückverfolgbarkeit und Markierung
a. Entspricht den Anforderungen der PSA-Verordnung. Benannte
Stelle für die EU-Baumusterprüfung - b. Nummer der notifizierten Stelle
für die Produktionskontrolle dieser PSA - c. Rückverfolgbarkeit: Data
Matrix - d. Bruchlast - e. Individuelle Nummer - f. Herstellungsjahr - g.
Herstellungsmonat - h. Nummer der Fertigungsreihe - i. Individuelle
Produktnummer - j. Normen - k. Lesen Sie die Gebrauchsanleitung
aufmerksam durch - l. Modell-Identifizierung - m. Klasse B
(Basismodell) oder H (HMS)