Operation Manual

105
7
Safety
Reinitialisation of the system is done with the
ignition on (ignition switch in the "ON" position
or "ON" mode) and the vehicle stationary.
F Open the glove box.
F Press the reinitialisation button.
The new pressure settings registered
are considered to be reference values by
the system.
Reinitialisation
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the
tyre pressure label.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
It is necessary to reinitialise the system every
time one or more tyre pressure is adjusted, and
after changing one or more wheels.
A label attached to the middle pillar, driver's
side, gives a reminder of this.
F This warning lamp flashes
3 times in the instrument panel
when the reinitialisation is done.
F Wait a few minutes before switching off the
ignition (ignition switch in the "ACC"
or "LOCK" position, or "OFF" mode).