Operation Manual

142
Practical information
Access to the spare wheel
and tools
Tools provided
The following tools are installed in a carrier,
located in the centre of the spare wheel:
1. Wheelbrace
2. Jack with handle
3. Removable towing eye.
Refer to the "Towing the vehicle" section.
Tyre pressures
These are indicated on the label affixed to the
middle pillar of the left door, driver's side.
Refer to the "Identification markings" section.
All of these tools are specific to your
vehicle and can vary according to
equipment. Do not use them for any
other purposes.
Never go underneath a vehicle
supported only by a jack (use an axle
stand).
Do not use:
- the jack for anything other than
lifting the vehicle,
- any other jack than the one
provided by the manufacturer.
Depending on version, the spare wheel and
tools are stowed in the boot under the floor.
F Remove the boot carpet.
F Remove the tool carrier.
F Slacken the central wheel retaining bolt.
F Remove the wheel.