Operation Manual

144
Practical information
Fitting the "space-saver"
type spare wheel
If your vehicle is fitted with alloy wheels,
it is normal to notice when tightening
the wheel bolts that the washers do not
come into contact with the "space-
saver" type spare wheel. The wheel is
secured by the conical contact surface
on each bolt.
F Position the wheel on the hub.
F Screw in the bolts fully by hand.
F Pre-tighten the bolts using the
wheelbrace 1 only.
Fitting a wheel
F Remove the bolts and put then in a clean
place.
F Remove the wheel.