Operation Manual

36
Acc ess
Changing the battery of
the electronic key
Battery ref.: CR2032 / 3 volts.
Saving the electronic key
battery
To preserve the battery, it is possible to prevent
the electronic key working (no reception of
radio waves).
When this function is activated, the "Keyless
Entry and Starting" system is inoperative.
To reactivate the electronic key, press one of
the buttons (open or closed padlock).
F Press on the open padlock twice,
while pressing on and holding
the closed padlock.
Check that the indicator lamp in the electronic
key flashes 4 times.
When replacement of the battery is
needed, this warning lamp comes on
in the instrument panel.
F Unclip the cover using a small screwdriver
at the cutout.
F Remove the cover.
F Remove the protective battery holder,
pulling it upwards.
F Remove the discharged battery from its
housing.
F Fit the new battery into its housing
observing the original direction of fitment.
F Refit the battery holder.
F Clip the cover onto the casing.