Operation Manual

71
5
Driving
Starting - stopping the engine with the key
1. "LOCK" position.
2. "ACC" position.
3. "ON" position.
4. "START" position.
Ignition switch
Avoid attaching heavy objects to the
key, which would weigh down on its
blade in the ignition switch and could
cause a malfunction.
Key in ignition
For vehicle fitted with a manual gearbox:
F Insert the key in the ignition switch.
F Turn the key to position 2 and unlock the
steering column, by turning wheel slightly.
F Fully depress the clutch pedal.
F Put the gear lever into neutral.
F Operate the starter by turning the key to
position 4 (START).
F Once the engine is running, release
the key.
The key returns automatically to
position 3 (ON).
Starting using the key
If the key has been left in the ignition,
an audible signal is heard on opening
the driver's door.
For vehicles fitted with an ETG electronic
gearbox:
F Insert the key in the ignition switch.
F Turn the key to position 2 and unlock the
steering column, by turning wheel slightly.
F Press and hold the brake pedal.
F Put the gear lever into position N.
F Operate the starter by turning the key to
position 4 (START).
F Once the engine is running, release
the key.
The key returns automatically to
position 3 (ON).
If you use the accessories for a
prolonged period (key in position 2 or 3),
you risk discharging the battery. Starting
your vehicle will then no longer be
possible. Be aware.
F Immobilise the vehicle.
F Put the gear lever into neutral (vehicles
fitted with a manual gearbox), or position N
(vehicles fitted with an ETG electronic
gearbox).
F Turn the key towards you to
position 2 (ACC).
F Press in and turn the key to
position 1 (LOCK).
F Remove the key from the ignition switch.
F Turn the steering until the steering
column locks.
Stopping