Operation Manual

190
Practical information
Changing brake lamp and
direction indicator bulbs
These bulbs are changed from inside the boot:
F open the boot,
F remove the access grille from the
corresponding side trim panel,
F slacken and remove the nut,
F disconnect the lamp unit connector,
F remove the lamp unit carefully by it pulling
in line towards the outside,
F press the retaining tabs and remove the
bulb holder,
F turn the bulb a quarter of a turn and
change it.
To reassemble, carry out these operations in
reverse order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.