Handbook
On-line handbook Select one of the following means of access to view your handbook on-line... Find your handbook on the PEUGEOT website, under "MyPEUGEOT". Scan this code for direct access to your handbook. This personal space offers advice and other useful information for the care and maintenance of your vehicle. If the "MyPEUGEOT" function is not available on the PEUGEOT public website for your country, you can find your handbook at the following address: http://public.servicebox.peugeot.
Welcome This handbook describes all of the equipment available in the whole range. Your vehicle will be fitted with some of the equipment described in this document, depending on its trim level, version and the specification for the country in which it is sold. The descriptions and illustrations are given without any obligation. Automobiles PEUGEOT reserves the right to modify the technical specifications, equipment and accessories without having to update this edition of the handbook.
Contents Overview Eco-driving . .
Contents Child safety Visibility Lighting Headlamp adjustment Cornering lighting Wiper controls Lighting dimmer Courtesy lamps Interior mood lighting Panoramic glazed sunroof 117 124 125 126 130 131 132 133 Carrying children Deactivating the passenger's front airbag ISOFIX child seats Child lock Checks 156 158 165 169 Bonnet Petrol engines Diesel engines Checking levels Checks 234 235 236 237 240 Technical data Safety General safety recommendations Direction indicators Hazard warning lamps Horn Eme
Overview Exterior Remote control key - locking/unlocking the vehicle - locating the vehicle - guide-me-home lighting - anti-theft protection - alarm - battery Starting - Switching off the engine 43-47 Wipers Changing a wiper blade 80-81 Panoramic glazed sunroof Roof bars Accessories 133 230 231-232 Lighting 117-123 LED lamps 121 121 Daytime running lamps Headlamp beam adjustment 124 125 Cornering lighting Changing bulbs 202-205 - front lamps - foglamps - direction indicator repeaters Door mirrors Do
Overview .
Overview Instruments and controls Courtesy lamps 131 Interior mood lighting 132 Rear view mirror 61 Emergency call / Assistance call 136, 254-255 Heating, ventilation Manual air conditioning Dual-zone air conditioning Front demisting / defrosting Rear screen emist/defrost Dashboard fuses Opening the bonnet USB port / Auxiliary socket 65-69 65-66 67-69 70 70 257-325 Bluetooth audio system 327-345 Audio system 347-358 Glove box fuses 208-209, 212 Door mirrors Electric windows, deactivating 208-
Overview Touch screen 34-37 Trip computer withthe touch screen 38-39 Setting the date/time with the touch screen 42 Lighting dimmer with the touch screen 130 Lighting controls Direction indicators Hazard warning lamps Locking/unlocking from inside Speed limiter Cruise control Memorising speeds Grip control Instrument panels Warning lamps Trip computer Distance recorders Setting the date/time Indicators Gear efficiency indicator Lighting dimmer 14-15 16-27 38-40 41 42 28-33 99 130 Parking sensors Par
Overview 8
Overview . Dashboard / centre console 1. 2. 3. 4. 5. 6. 7. 8. 9. Cruise control / speed limiter controls. Steering mounted controls for the the touch screen. Wiper / screenwash / trip computer stalk. Driver's front airbag. Horn. Lighting and direction indicator stalk Bonnet release lever. Steering wheel adjustment control. Headlamp height adjustment. Switch panel: A. Deactivation of the rear parking sensors or Activation of Park Assist. B. Deactivation of the DSC/ASR system. C.
Overview Maintenance - Technical data AdBlue ® and SCR system (BlueHDi Diesel) 175-182 Checking levels 237-239 - oil - brake fluid - coolant - screenwash fluid - additive (Diesel with particle filter) Running out of fuel, Diesel 174 12V battery Load reduction, energy economy mode Engine compartment fuses Petrol weights Diesel weights 214-218 219 208-209, 213 245-246 249-251 Checking components 240-241 - battery - air / passenger compartment filter - oil filter - particle filter (Diesel) - brake pads
Overview .
Eco-driving Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions. Optimise the use of your gearbox Control the use of your electrical equipment With a manual gearbox, move off gently and change up without waiting. During acceleration change up early. Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.
Eco-driving Limit the causes of excess consumption Observe the recommendations on maintenance Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats. Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference. Remove roof bars and roof racks after use.
Monitoring LCD instrument panel Dials and screens 1. 2. 3. 4. 5. Engine coolant temperature gauge. Rev counter (x 1 000 rpm or tr/min), graduation according to engine (petrol or Diesel). Engine oil level indicator*. Gear efficiency indicator for a manual gearbox or gear lever position and gear for an electronic or automatic gearbox. Digital speedometer (mph or km/h) This can be switched off with a long press on B. Control buttons Cruise control or speed limiter settings. 7.
Monitoring Matrix instrument panel Dials and screens 1. 2. 3. 4. 5. Engine coolant temperature gauge. Rev counter (x 1 000 rpm or tr/min), graduation according to engine (petrol or Diesel). Cruise control or speed limiter settings. Gear efficiency indicator for a manual gearbox or gear lever position and gear for an electronic or automatic gearbox. Speedometer (mph or km/h). 1 Control buttons 6. 7. 8. 9. Service indicator, then total distance recorder (miles or km).
Monitoring Library of indicator and warning lamps Indicator and warning lamps ● ● 16 indicator lamp informing that a system is switched on, warning lamp for preventive purposes or for a fault. When the ignition is switched on Associated warnings Certain warning lamps come on for a few seconds in the instrument panel and/or instrument panel screen when the vehicle's ignition is switched on. When the engine is started, these same warning lamps should go off.
Monitoring Warning / indicator lamp State Cause Action / Observations Left-hand direction indicator Flashing with audible signal. The lighting stalk has been pushed down. When changing lane. Right-hand direction indicator Flashing with audible signal. The lighting stalk has been pushed up. Sidelamps fixed. The lighting stalk is in the "Sidelamps" position. Dipped beam headlamps fixed. The lighting stalk is in the "Dipped beam headlamps" position. Main beam headlamps fixed.
Monitoring Warning / indicator lamp 18 State Cause Action / Observations Diesel engine pre-heating fixed. The key is at position 2 (ignition on) in the ignition switch. Wait until the warning lamp goes off before starting. The period of illumination of the warning lamp is determined by the ambient conditions (up to about 30 seconds in very low temperatures). If the engine does not start, switch the ignition off and then on, wait until the warning lamp goes off again, then start the engine.
Monitoring Warning / indicator lamp State Cause Action / Observations Foot on the clutch* fixed. In the STOP mode of Stop & Start, changing to START mode is refused because the clutch pedal is not fully down. You must declutch fully to allow the change to engine START mode. Automatic wiping fixed. The wiper control is pushed downwards. Automatic front wiping is activated. To deactivate automatic wiping, operate the control stalk downwards or put the stalk into another position.
Monitoring Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message in the screen. Warning / indicator lamp Passenger's airbag system 20 State Cause Action / Observations fixed. The control, located in the glove box, is set to the OFF position. The passenger's front airbag is deactivated.
Monitoring Warning lamps When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on the part of the driver. Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen. If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
Monitoring Warning / indicator lamp State Cause Action / Observations Braking fixed. The brake fluid level has dropped significantly. You must stop as soon as it is safe to do so. Top up with brake fluid listed by PEUGEOT. If the problem persists, have the system checked by a PEUGEOT dealer or a qualified workshop. fixed, associated with the ABS warning lamp. The electronic brake force distribution (EBFD) system has a fault. You must stop as soon as it is safe to do so.
Monitoring Warning / indicator lamp State Cause Action / Observations flashing. The DSC/ASR regulation is operating. The system optimises traction and improves the directional stability of the vehicle in the event of loss of grip or trajectory. fixed. The DSC/ASR system has a fault. Have the system checked by a PEUGEOT dealer or a qualified workshop. Power steering fixed. The power steering has a fault. Drive carefully at reduced speed.
Monitoring Warning / indicator lamp AdBlue ® (BlueHDi Diesel) + State Cause Action / Observations fixed, on switching on the ignition, accompanied by an audible signal and a message indicating the remaining driving range. The remaining driving range is between 350 miles (600 km) and 1500 miles (2400 km). Top-up the AdBlue ® as soon as possible: go to a PEUGEOT dealer or a qualified workshop, or carry out this operation yourself.
Monitoring Warning / indicator lamp + + SCR emissions control system (BlueHDi Diesel) State Cause Action / Observations fixed, on switching on the ignition, associated with the SERVICE and engine diagnostic warning lamps, accompanied by an audible signal and a message. A fault with the SCR emissions control system has been detected. This alert disappears once the exhaust emissions return to normal levels.
Monitoring Warning / indicator lamp State Cause Action / Observations fixed with the needle in the red zone. There remains approximately 5 litres of fuel in the tank. At this point, you begin to use the fuel reserve. flashing with the needle in the red zone. There remains very little fuel in the tank. Refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a sufficient addition of fuel is made.
Monitoring Warning / indicator lamp Door(s) open State Cause Action / Observations fixed, associated with a message identifying the door, if the speed is below 6 mph (10 km/h). A door or the boot is still open. Close the door or boot. 1 fixed, associated with a message identifying the door, together with an audible signal if the speed is above 6 mph (10 km/h). Seat belt(s) not fastened / unfastened fixed or flashing accompanied by an audible signal.
Monitoring Gauges and indicators Service indicator System which informs the driver when the next service is due, in accordance with the manufacturer's servicing schedule. The point at which the service is due is calculated from the last reset of the indicator, according to the mileage covered and the time elapsed since the last service. For BlueHDi Diesel versions, the degree of deterioration of the engine oil is also taken into account.
Monitoring Service overdue For 7 seconds after the ignition is switched on, the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 186 miles (300 km). For 7 seconds after the ignition is switched on, the screen indicates: 7 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on.
Monitoring Resetting the service indicator Retrieving the service information You can access the service information at any time. F Press the trip distance recorder reset button. The service information is displayed for a few seconds, then disappears. After each service, the service indicator must be reset to zero.
Monitoring Advice Oil level Dipstick Checking For more information on the underbonnet and the engine oil dipstick, refer to the corresponding section. There are 2 marks on the dipstick: F Open the bonnet and secure it with the stay. F Pull the dipstick out and wipe it with a clean cloth. F Return the dipstick to its tube and then pull it out again to check the level against the mark. F Return the dipstick to its tube.
Monitoring Electronic oil level indicator The check is done for a few seconds after switching on the ignition, with a message in the display or screen (depending on version). It is only valid if the vehicle is on level ground and the engine has been off for at least 30 minutes. It is normal to top-up the engine oil level between services (or oil changes). PEUGEOT recommends that you check the oil level and top-up if necessary, every 3 000 miles (5 000 km).
Monitoring Coolant temperature gauge 1 After driving for a few minutes, the temperature and pressure in the cooling system increase. To top up the level: F wait for the engine to cool, F unscrew the cap slightly to allow the pressure to drop, F when the pressure has dropped, remove the cap, F top up the level to the "MAX" mark.
Monitoring Touch screen It gives access to: menus for adjusting settings for vehicle functions and systems, audio and display configuration menus, audio system and telephone controls and the display of associated information. And, depending on equipment, it allows: the display of alert messages and the visual parking sensors information, access to the controls for the navigation system and Internet services, and the display of associated information.
Monitoring 1 1. Volume / mute. See the "Audio equipment and telematics" section. Menus Press this button for access to the different menus. Navigation Depending on trim level, navigation can be not available, an option or standard. See the "Audio equipment and telematics" section. Radio Media See the "Audio equipment and telematics" section. Settings Allows configuration of the display and the system. Gives access to interactive help for the vehicle's main systems and warning lamps.
Monitoring "Settings" menu The functions available through this menu are detailed in the table below. Button Corresponding function Comments Audio settings Adjustment of volume, balance... Turn off screen Turns the screen off. Color schemes Choice of a color scheme. Interactive help Access to the interactive user guide. System Settings Choice of units: temperature (°Celsius or °Fahrenheit) distance and fuel consumption (l/100 km, mpg or km/l). Time/Date Setting the date and time.
Monitoring "Driving" menu 1 The functions accessible from this menu are detailed in the table below.
Monitoring Trip computer System that gives you information on the current journey (range, fuel consumption…). Instrument panel Trip reset - The current information tab with: ● the range, ● the current fuel consumption, ● the Stop & Start time counter. - Trip "1" with: ● the average speed, ● the average fuel consumption, ● the distance travelled, for the first trip. Information display - F Press the button on the end of the wiper control stalk to display the various tabs in succession.
Monitoring 1 Touch screen Information display Trip reset - The current fuel consumption tab with: ● the range, ● the current fuel consumption, ● the Stop & Start time counter. - The trip "1" tab with: ● the distance travelled, ● the average fuel consumption, ● the average speed, for the first trip. F Press the MENU button for access to the different menus. F Select the "Driving" menu to display the various tabs. F Select the desired tab using your finger.
Monitoring Trip computer A few definitions Range Current fuel consumption Distance travelled (miles or km) The distance which can still be travelled with the fuel remaining in the tank (related to the average fuel consumption over the last few miles (kilometres) travelled). (mpg or l/100 km or km/l) Calculated over the last few seconds. (miles or km) Calculated since the last trip reset.
Monitoring Distance recorders Odometer Trip recorder System that measures the total distance travelled by the vehicle during its life. The total distance is displayed in zone A of the instrument panel screen. System that measures the distance travelled (daily, for example) since it was last reset by the driver. The trip recorder is displayed in zone B of the instrument panel screen. 1 Resetting the trip recorder With the trip mileage displayed, press this button for a few seconds.
Monitoring Setting the date and time Instrument panel Touch screen Select "Adjust time" or "Adjust date". F Each press of this button moves between the following settings: - hours, - minutes, - 12 or 24 hour format. Press the MENU button for access to the different menus. Select the "Settings" menu. Display the secondary page. In the secondary page select "Time/ Date". 42 Modify the setting using the virtual keypad then press on "Confirm".
Access Remote control key System for the central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle, as well as providing protection against theft. Unfolding the key Unlocking the vehicle Using the key F Press this button to unfold the key. 2 F Turn the key in the driver's door lock towards the front of the vehicle to unlock it. Using the remote control A. Unfolding / Folding. B. Unlocking. Disarming the alarm. C. Locking.
Access Locking the vehicle Using the key F Turn the key in the driver's door lock towards the rear to lock the vehicle. Using the remote control F Press the closed padlock to lock the vehicle. Maintaining the locking action (key or remote control) automatically closes the windows. As a safety measure (children on board), never leave the vehicle without taking your key, even for a short period. 44 Deadlocking Locking is confirmed by fixed lighting of the direction indicators for approximately 2 seconds.
Access Folding the key F A press switches on the vehicle's lighting and flashes the direction indicators for a few seconds to help you locate your vehicle in a car park. Using the remote control F Press the closed padlock to lock the vehicle completely. F Press the closed padlock again within five seconds to deadlock the vehicle. Deadlocking is confirmed by fixed lighting of the direction indicators for approximately two seconds. Depending on version, the door mirrors fold at the same time.
Access Electronic engine immobiliser Remote control problem The original key contains a coded electronic chip. When the ignition is switched on, starting is only possible if the code is detected and recognised. This protection against theft locks the engine management system a few moments after the ignition is switched off and prevents starting of the engine following a break-in.
Access Lost keys Go to a PEUGEOT dealer with the vehicle's registration document, your personal identification documents and if possible the key code label. The PEUGEOT dealer will be able to look up the key code and the transponder code required to order a new key. 2 Remote control The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Access Doors Opening From outside Closing From inside F Push or pull the door to close it. When one of the doors is not properly closed: - - F After unlocking the vehicle using the remote control or the key, pull the door handle. when driving (speed above 6 mph (10 km/h)), this warning lamp comes on, accompanied by an audible signal and the display of an alert message for a few seconds. F Pull the interior control lever of a front door; this unlocks the vehicle completely.
Access Back-up control For mechanically locking and unlocking the doors in the event of a fault with the central locking system or a battery failure. Driver's door Passenger doors Insert the key in the lock to lock or unlock the door. Locking 2 In the event of a fault with the central locking, it is essential to disconnect the battery to lock the boot and so assure the complete locking of the vehicle. F On the rear doors, check that the child lock is not on.
Access Boot Opening Closing Tailgate release F Lower the tailgate using the interior grab handle. F If necessary, press down on the tailgate to fully close it. System for mechanical unlocking of the boot in the event of a central locking malfunction. If the tailgate is not closed correctly: - F After unlocking the boot or the vehicle using the remote control or the key, press the opening control, then raise the tailgate.
Access Locking / unlocking from the inside F Press the button to lock (the indicator lamp in the button comes on) or unlock (the indicator lamp in the button goes off) the doors and boot from inside.
Access Alarm Self-protection function The system checks for the putting out of service of its components. The alarm is triggered if the battery, the central control or the wires of the siren are put out of service or damaged. For all work on the alarm system, contact a PEUGEOT dealer or a qualified workshop. System which protects and provides a deterrent against theft and break-ins.
Access Locking the vehicle with exterior perimeter monitoring only Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as: leaving a pet in the vehicle, leaving a window partially open, washing your vehicle. - Deactivating the interior volumetric monitoring F Switch off the ignition. F Within 10 seconds, press the button until the indicator lamp is on continuously. F Get out of the vehicle.
Access Electric windows Manual operation To open or close the window, press or pull the switch gently. The window stops as soon as the switch is released. Automatic one-touch operation (depending on version) 1. 2. 3. 4. 5. Left hand front electric window. Right hand front electric window. Right hand rear electric window. Left hand rear electric window. Deactivating the rear electric window switches.
Access 2 Reinitialising the electric windows Following reconnection of the battery, the safety anti-pinch function must be reinitialised. The safety anti-pinch is not active during these operations: lower the window completely, then raise it, it will rise in steps of a few centimetres each time the switch is pressed. Repeat the operation until the window closes completely, press and hold the switch upwards for at least one second after reaching this position, window closed.
Comfort Front seats As a safety measure, seat adjustments should only be carried out when stationary. Forwards-backwards Height Backrest F Raise the control and slide the seat forwards or backwards. F Pull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required. F Push the control rearwards.
Comfort Head restraints 3 F To raise the head restraint, pull it upwards. F To remove the head restraint, press the lug A and pull the head restraint upwards. F To put the head restraint back in place, engage the head restraint stems in the openings, keeping them in line with the seat back. F To lower the head restraint, press the lug A and the head restraint at the same time. The head restraint has a frame with notches which prevent it from lowering; this is a safety device in case of impact.
Comfort Rear seats Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot. Folding the backrest F Move the corresponding front seat forward if necessary. F Check that the corresponding outer seat belt is positioned correctly against the backrest and buckle it. F Place the head restraints in the low position.
Comfort Steering wheel adjustment Head restraints These have one position for use (up) and a stowed position (down). They can be removed and are interchangeable side to side. To remove a head restraint: F pull the head restraint fully up, F then, press the lug A. Never drive with the head restraints removed; they must be in place and correctly adjusted. PEUGEOT i-Cockpit F When stationary, pull the control lever to release the adjustment mechanism.
Comfort Mirrors Door mirrors Each fitted with an adjustable mirror glass providing the lateral rearward vision necessary for overtaking or parking. They can also be folded for parking in confined spaces. Folding - If the mirrors are folded using control A, they will not unfold when the vehicle is unlocked. Pull again on control A. As a safety measure, the mirrors should be adjusted to reduce the "blind spots".
Comfort Rear view mirror Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles... Manual model Automatic "electrochrome" model Adjustment F Adjust the mirror so that the glass is directed correctly in the "day" position. This system automatically and progressively changes between the day and night uses by means of a sensor, which measures the light from the rear of the vehicle.
Comfort Ventilation Air intake The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode. Air intake flow The incoming air follows various paths depending on the controls selected by the driver: direct arrival in the passenger compartment (air intake), passage through a heating circuit (heating), passage through a cooling circuit (air conditioning).
Comfort Recommendations for ventilation and air conditioning In order for these systems to be fully effective, follow the operation and maintenance guidelines below: F To obtain an even air distribution, take care not to obstruct the exterior air intake grilles located at the base of the windscreen, the nozzles, the vents and the air outlets, as well as the air extractor located in the boot.
Comfort Suggested interior settings Heating or Manual air conditioning I require... Air distribution Air flow Recirculation of interior air / Intake of exterior air HOT COLD DEMISTING DEFROSTING Digital air conditioning: use the automatic mode in preference by pressing the "AUTO" button.
Comfort Heating / Ventilation Manual air conditioning Manual mode 3 1. 2. 3. 4. 5. Temperature adjustment. Air flow adjustment. Air distribution adjustment. Air intake/ air recirculation. Air conditioning On / Off. Temperature F Turn the knob from blue (cold) to red (hot) to adjust the temperature to your wishes. Air flow F Turn the knob from position 1 to position 6, to obtain the desired air flow.
Comfort Air distribution Windscreen and side windows. Windscreen, side windows and footwells. Footwells. Centre and side air vents. The air distribution can be modulated by placing the knob at an intermediate position. Air intake / Air recirculation Recirculation of the air in the vehicle isolates the passenger compartment from exterior odours and fumes. Return to the intake of exterior air as soon as possible to avoid the risk of deterioration of air quality and misting.
Comfort Dual-zone digital air conditioning AUTO mode When the engine is cold, the air flow will only reach its optimum level gradually to prevent too great a distribution of cold air. In cold weather, it favours the distribution of warm air to the windscreen, the side windows and the footwells only. 1. 2. 3. 4. 5. 6. 7. 8. Automatic comfort programme. Temperature adjustment on driver's side. Temperature adjustment on passenger's side. Automatic visibility programme. Air conditioning On/Off.
Comfort Auto - Visibility programme Temperature Adjustment The driver and front passenger can each set the temperature to suit their requirements. The value indicated in the screen corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. Switching on F Press the "visibility" button for faster demisting or defrosting of the windscreen and side windows.
Comfort Air distribution F Press this button several times in succession to direct the air flow in turn towards: - the windscreen, the side windows and the footwells, - the windscreen and side windows (demisting or defrosting), - the central and side vents, - the central vents, the side vents and the footwells, - the footwells. Air intake/Air recirculation Manual mode Switching on Depending on your requirements, you can make a different selection from that offered by the system by changing a setting.
Comfort Front demist - defrost These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows. Manual air conditioning Dual-zone digital air conditioning Switching on Auto - Visibility programme F Put the air flow, temperature and distribution controls to the dedicated marked position. Switching on F Press the "A/C" button for air conditioning; the indicator lamp in the button comes on.
Fittings Interior fittings 1. 2. 3. 4. 5. 6. 7. 8. Glove box (see details on the following page) Open storage compartment (depending on version) 12 V accessory socket (120 W) Observe the maximum power rating to avoid damaging your accessory.
Fittings Glove box 12 V socket Front armrest Its lid has locations for a pair of glasses... F To open the glove box, raise the handle. It houses the front passenger's airbag deactivation switch A. F To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and connect a suitable adaptor. (depending on version) The armrest can be inclined forward for your comfort or folded fully back.
Fittings USB port / Jack auxiliary socket 4 This connection box, consisting of an USB port and a JACK auxiliary socket is located on the centre console. It allows the connection of portable device, such as a digital audio player of the iPod ® type or a USB memory stick. It reads the audio files which are transmitted to your audio system and played via the vehicle's speakers.
Fittings Mats Removable carpet protection. Removal Refitting To refit the mat on the driver's side: F position the mat correctly, F refit the fixings by pressing, F check that the mat is secured correctly. To remove the mat on the driver's side: F move the seat as far back as possible, F unclip the fixings, F remove the mat.
Fittings Boot fittings 1. 2. 3. 4. 5. 6.
Fittings High load retaining net Hooked onto the upper fixings and onto the lower rings or the lugs, this permits use of the entire loading volume up to the roof: behind the rear seats (row 2), behind the front seats (row 1) when the rear seats are folded. When positioning the net, check that the strap loops are visible from the boot; this will make slackening or tightening easier.
Fittings Rear parcel shelf 4 This consists of two sections which can be folded back on each other. To store it, fold it on itself and place it at the bottom of the boot. To gain access to the boot from the rear seats: F raise the front section of the rear parcel shelf using the grip A.
Fittings Warning triangle (stowing) The location for stowing a folded triangle or its box is under the front seat or under the boot carpet (depending on version). Before leaving your vehicle to set up and install the triangle, switch on the hazard warning lamps and put on your high visibility vest. The dimensions of the triangle (once folded) or its storage box must be: A: length = 438 mm, B: height = 56 mm, C: width = 38 mm. To use the triangle, refer to the manufacturer's instructions.
Driving Driving recommendations Observe the driving regulations and remain vigilant whatever the traffic conditions. Pay close attention to the traffic and keep your hands on the wheel so that you are ready to react at any time to any eventuality. On a long journey, a break every two hours is strongly recommended. In difficult weather, drive smoothly, anticipate the need to brake and increase the distance from other vehicles.
Driving Starting - Switching off the engine Ignition switch Starting With a manual gearbox, place the gear selector in neutral then fully depress the clutch pedal. 1. 2. 3. Stop position. Ignition on position. Starting position. F Insert the key in the ignition switch. The system recognises the starting code. F Release the steering column by simultaneously turning the wheel and the key. With an electronic gearbox, place the gear selector at N then press the brake pedal firmly.
Driving Switching off F Immobilise the vehicle. F Turn the key fully towards you to position 1 (Stop). F Remove the key from the ignition switch. F To lock the steering column, turn the wheel until the lock engages. To facilitate unlocking of the steering wheel, it is recommended that you place the wheels in the straight ahead position before switching off the engine. Free-wheeling For safety reasons, do not free-wheel. Otherwise, some vehicle functions will no longer be active.
Driving Manual parking brake Application Release F Pull the parking brake lever up to immobilise your vehicle. F With the foot brake applied, pull the parking brake lever up gently, press the trigger, then lower the lever fully. On level ground, it is not necessary to make a maximum pull on the parking brake lever.
Driving 5-speed manual gearbox 6-speed manual gearbox Engaging reverse gear Engaging 5th or 6th gear Engaging reverse gear F Move the gear selector fully to the right to engage 5th or 6th gear. 5 Failure to observe this procedure may cause permanent damage to the gearbox (engaging 3rd or 4th gear by mistake). F Push the gear selector to the right then backwards. F Raise the ring under the knob and move the gear selector to the left then forwards.
Driving 5-speed electronic gearbox 5-speed electronically controlled gearbox which offers a choice between the ease of automatic operation or the pleasure of manual gear changing. Three driving modes are offered: automated mode for automatic control of the gears by the gearbox, without any action by the driver. manual mode for sequential changing of the gears by the driver, using the gear selector or the steering mounted control paddles.
Driving Display in the instrument panel Gear selector positions N. Neutral R. Reverse 1 2 3 4 5. Gears in manual mode AUTO. This comes on when the automated mode is selected. It switches off on changing to manual mode. F Place your foot on the brake when this warning lamp flashes (e.g.: starting the engine). There is an audible signal on engagement of reverse. Moving off Manual mode F To start the engine, place the selector at position N. F Press the brake pedal fully. F Start the engine.
Driving For best acceleration, when overtaking another vehicle for example, press the accelerator pedal firmly to pass the point of resistance. 86 Stopping the vehicle Before switching off the engine, you can change to position N to be in neutral. In this case, you must apply the parking brake to immobilise the vehicle. "Auto sequential" mode Reinitialisation In the automated mode, you can resume control temporarily at any time using the steering mounted control paddles.
Driving 6-speed electronic gearbox 6-speed electronically controlled gearbox which offers a choice between the ease of fully automatic operation or the pleasure of manual gear changing. There are two driving modes: automated mode for automatic control of the gears by the gearbox, manual mode for sequential gear changing by the driver. In automated mode, it remains possible to change gear manually by using the steering mounted control paddles when required, when overtaking, for example.
Driving Display in the instrument panel Moving off Automated mode F To start the engine, place the selector at position N. F Press the brake pedal down fully. F Start the engine. F After starting the vehicle, select position A for enter automated mode. If the engine does not start: - Gear selector positions N. Neutral R. Reverse 1 2 3 4 5 6. Gears in manual mode AUTO. This comes on when the automated mode is selected. It switches off on changing to manual mode.
Driving Manual gear changing Manual mode F When the vehicle has moved off, select position M to change to manual mode. F Pull the selector towards the + sign to change up a gear. F Push the selector towards the - sign to change down a gear. This selective gear change mode enables you to overtake, for example, while still remaining in automatic mode. F Operate the + or - steering mounted control paddle. The gearbox engages the gear requested if the engine speed permits.
Driving 90 Stopping the vehicle Operating fault Before switching off the engine, you can choose to: move to position N to engage neutral, leave the gear engaged; in this case, it will not be possible to move the vehicle. In both cases, you must apply the parking brake to immobilise the vehicle. With the ignition on, the flashing of this warning lamp and the flashing of AUTO, accompanied by an audible signal and a message in the instrument panel screen, indicates a malfunction of the gearbox.
Driving Automatic gearbox 4-speed automatic gearbox which offers a choice between the ease of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Two driving modes are available: automatic operation with electronic management of the gears by the gearbox, with a sport programme for a more dynamic style of driving and a snow programme to make driving easier when grip is poor. manual operation for sequential changing of the gears by the driver. Gear selection gate 1.
Driving Automatic operation Moving off F With your foot on the brake, select position P or N. F Start the engine. If this procedure is not followed, there is an audible signal, accompanied by the display of an warning message. F With the engine running, press the brake pedal. F Release the parking brake. F Select position R, D or M. F Gradually release the brake pedal. The vehicle then moves off.
Driving Sport and snow programmes Return to standard automatic operation Manual operation These two special programmes supplement the automatic operation in very specific conditions of use. F At any time, press the button selected again to quit the programme engaged and return to auto-adaptive mode. F Select position M for sequential changing of the four gears. F Push the selector towards the + sign to change up a gear. F Pull the selector towards the - sign to change down a gear.
Driving Invalid value during manual operation This symbol is displayed if a gear is not engaged correctly (selector between two positions). Stopping the vehicle Operating fault Before switching off the engine, you can engage position P or N to place the gearbox in neutral. In both cases, apply the parking brake to immobilise the vehicle. When the ignition is on, the lighting of this warning lamp, accompanied by an audible signal and a message in the multifunction screen, indicates a gearbox fault.
Driving Automatic gearbox (EAT6) 6-speed automatic gearbox which offers a choice between the ease of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Two driving modes are available: automatic operation for electronic management of the gears by the gearbox, with the sport programme for a more dynamic driving style or the snow programme to improve driving on slippery surfaces, manual operation for sequential changing of the gears by the driver.
Driving Moving off F With your foot on the brake, select position P or N. F Start the engine. If these conditions are not met, there is an audible signal, accompanied by the display of an warning message. F With the engine running, press the brake pedal. F Release the parking brake. F Select position R, D or M. F Gradually release the brake pedal. The vehicle moves off immediately.
Driving Automatic operation F Select position D for automatic changing of the six gears. The gearbox then operates in auto-adaptive mode, without any intervention on the part of the driver. It continuously selects the most suitable gear according to the style of driving, the profile of the road and the load in the vehicle. For maximum acceleration without touching the selector, press the accelerator pedal down fully (kick down).
Driving Manual operation F Select position M for sequential changing of the six gears. F Move the selector towards the + sign to change up a gear. F Move the selector towards the - sign to change down a gear. It is only possible to change from one gear to another if the vehicle speed and engine speed permit; otherwise, the gearbox will operate temporarily in automatic mode. D disappears and the gears engaged appear in succession in the instrument panel.
Driving Gear shift indicator System which reduces fuel consumption by advising the driver to change up. Operation Depending on the driving situation and your vehicle's equipment, the system may advise you to skip one (or more) gear(s). You can follow this instruction without engaging the intermediate gears. The gear engagement recommendations must not be considered compulsory. In fact, the configuration of the road, the amount of traffic and safety remain determining factors when choosing the best gear.
Driving Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Driving Manual deactivation Going into engine START mode The "ECO" warning lamp goes off and the engine starts: with a manual gearbox, when you depress the clutch pedal, with an electronic / automatic gearbox: ● gear selector in position A / D or M, when you release the brake pedal, ● or gear lever in position N and the brake pedal released, when you place the gear selector into position A / D or M, ● or when you engage reverse gear.
Driving Manual reactivation Operating fault Press the "ECO OFF" switch again. The system is active again; this is confirmed by the switch warning lamp going off, accompanied by a message in the screen. The Stop & Start requires the use of a 12 V battery of special specification and technology. All work on this type of battery must be carried out only by a PEUGEOT dealer or a qualified workshop. For more information on the 12 V battery, refer to the corresponding section.
Driving Hill start assist System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal. This function is only active when: the vehicle is completely stationary, with your foot on the brake pedal, when certain conditions of gradient are met, with the driver’s door closed. The hill start assist function cannot be deactivated.
Driving Speed limiter System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal in the normal manner no longer has any effect. Steering mounted controls Displays in the instrument panel The speed limiter is switched on manually: the programmed speed must be at least 20 mph (30 km/h). The speed limiter is switched off by manual operation of the control.
Driving Leaving limiter mode Programming F Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected but is not switched on (PAUSE). You do not have to switch the speed limiter on in order to set the speed. F Turn thumb wheel 1 to the "0" position: the speed limiter mode is deselected. The display returns to the distance recorder. Operating fault F Set the speed value by pressing button 2 or 3.
Driving Cruise control System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. Steering mounted controls Displays in the instrument panel 1. The programmed information is grouped together in the instrument panel screen. 5. Cruise control stopped/resumed indication. 6. Cruise control mode selection indication. 7. Programmed speed value. 8. Selectiion of a memorised speed setting.
Driving Operating fault Programming F Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). F Set the programmed speed by accelerating to the required speed, then press button 2 or 3. You can then change the programmed speed using buttons 2 and 3: by + or - 1 mph (km/h) = short press, by + or - 5 mph (km/h) = long press, in steps of + or - 5 mph (km/h) = maintained press.
Driving Memorising speeds This memorisation of speeds applies to both the speed limiter (limit speed) and the cruise control (running speed). You can memorise up to 5 speed settings in the system. By default, a few speeds are already memorised. Memorisation Enter the new value using the virtual keypad, then press on "Confirm". Press the MENU button for access to the different menus. Press on "Confirm" to save the modifications and quit the menu. Select the "Driving" menu. Display the secondary page.
Driving Selection 5 To select a memorised speed: F press and hold button "+" or "-"; the system stops at the closest memorised speed, F press and hold button "+" or "-" again to select another memorised speed. A reminder of the speed and the state of the system (on / off) is displayed in the instrument panel.
Driving Parking sensors Rear parking sensors The system is switched on by engaging reverse gear. This is confirmed by an audible signal. The system is switched off when you come out of reverse gear. This system indicates the proximity of an obstacle (pedestrian, vehicle, tree, gate, etc.) which comes within the field of detection of sensors located in the bumper. Certain types of obstacle (stake, roadworks cone, etc.
Driving Front parking sensors* Operating fault In addition to the rear parking sensors, the front parking sensors are triggered when an obstacle is detected in front and the speed of the vehicle is still below 6 mph (10 km/h). The front parking sensors are interrupted if the vehicle stops for more than 3 seconds in forward gear, if no further obstacles are detected or when the speed of the vehicle exceeds 6 mph (10 km/h).
Driving Reversing camera The blue lines represent the general direction of the vehicle (the difference corresponds to the width of your vehicle without the mirrors). The red lines represent a distance of about 30 cm beyond the edge of your vehicle's rear bumper. The green lines represent distances of about 1 and 2 metres beyond the edge of your vehicle's rear bumper. The turquoise blue curves represent the maximum turning circle. The reversing camera is activated automatically when reverse gear is engaged.
Driving Park Assist The system detects a parking space and then provides assistance with the parallel parking manoeuvres. It controls the steering and provides visual and audible information to the driver. The driver manages the accelerator, brakes, gears and the clutch in the case of a manual gearbox. The Park Assist system cannot in any circumstances replace the need for vigilance on the part of the driver.
Driving Entering a parallel parking space F When you have identified a free space, reduce the speed of the vehicle to a maximum of 12 mph (20 km/h). F Operate the direction indicator on the parking side. F Move your vehicle forward until a new message is displayed. F Move forwards alongside the parking space at a speed below 12 mph (20 km/h) to measure it, keeping at a distance of between 0.5 and 1.5 metres from the row of parked vehicles.
Driving Exit from a parallel parking space F When you want to exit from a parallel parking space, start the engine. The assisted parking manoeuvre is in progress. Without exceeding 5 mph (8 km/h), continue the manoeuvres following the information given by the "parking assistance" system, until the end of manoeuvre message is displayed. The indicator lamp in the control goes off, accompanied by a audible signal. With the vehicle stationary, to activate the Park Assist system: F Press this control.
Driving Deactivation The system is deactivated automatically: on switching off the ignition, if the engine stalls, if no manoeuvre is started within 5 minutes of selection of the type of manoeuvre, after a prolonged stop of the vehicle during a manoeuvre, if the road wheel anti-spin regulation (ASR) is triggered, if the speed of the vehicle exceeds the stated limit, when the driver interrupts movement of the steering wheel, if the driver presses the Park Assist control, if correct positioning of the vehicl
Visibility Lighting Main lighting Additional lighting The vehicle has various exterior lamps: sidelamps, to be seen, dipped beam headlamps to see without dazzling other drivers, main beam headlamps to see clearly when the road is clear.
Visibility Selection ring for main lighting mode Turn the ring to align the desired symbol with the marking. Lighting off (ignition off) / Front daytime running lamps (engine running). Automatic illumination of headlamps. Sidelamps only. Dipping the headlamps Dipped or main beam headlamps. Model without AUTO lighting Pull the stalk to switch the lighting between dipped / main beam headlamps.
Visibility Foglamps selection ring The foglamps operate with dipped and main beam headlamps. 6 Rear foglamp only F To switch it on, turn the ring forwards. When the lighting is switched off automatically (with AUTO model), the foglamp and the dipped beam headlamps will remain on. F To switch it off, turn the ring rearwards.
Visibility In good or rainy weather, both day and night, the front foglamps and the rear foglamp are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or snow. In these weather conditions, it is your responsibility to switch on the foglamps and dipped beam headlamps manually as the sunshine sensor may detect sufficient light. Do not forget to switch off the front foglamps and the rear foglamp when they are no longer necessary.
Visibility LED lamps Daytime running lamps Daytime lighting, compulsory in certain countries, which comes on automatically when the engine is started making the vehicle more visible to other users. They come on when the engine is started. Depending on the country of sale, they are used for: daytime running lamps* in day mode and sidelamps in night mode (they are brighter when daytime running lamps), or sidelamps in day and night mode.
Visibility Manual guide-me-home lighting Parking lamps Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor. On Off F With the ignition off, "flash" the headlamps using the lighting stalk. F A further "headlamp flash" switches the function off. The manual guide-me-home lighting switches off automatically after a set time.
Visibility Automatic illumination of headlamps The sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected or in certain cases of activation of the windscreen wipers. As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.
Visibility Headlamp adjustment To avoid causing a nuisance to other road users, the headlamp beams should be adjusted according to the load in the vehicle. 0. 1 or 2 people in the front seats. -. Intermediate setting 1. 5 people. -. 5 people + maximum authorised load. 2. Driver + maximum authorised load. The initial setting is position "0".
Visibility Cornering lighting Switching on This function starts: when the corresponding direction indicator is switched on, or from a certain angle of rotation of the steering wheel. Switching off With dipped or main beams, this function makes use of the beam from a front foglamp to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately 40 km/h) (urban driving, winding road, intersections, parking manoeuvres...).
Visibility Wiper controls The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the climatic conditions. Manual controls Windscreen wipers The wipers are controlled directly by the driver. Wiping speed: Fast (heavy rain). Programming Normal (moderate rain). Various automatic wiper control modes are also available according to the following options: automatic rain sensitive windscreen wipers, rear wiping on engaging reverse gear.
Visibility Reverse gear When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating. Programming Operation of the rear wiper in reverse is a setting in the touch screen. 6 Press the MENU button for access to the different menus. Rear wiper Rear wiper selection ring: Select the "Driving" menu. Park. Display the secondary page. Intermittent wipe. Select "Vehicle settings". Select the "Driving assistance" tab. Wash-wipe (set duration).
Visibility Automatic rain sensitive windscreen wipers The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall. Switching on Briefly push the control stalk downwards. A wiping cycle confirms that the instruction has been accepted. This warning lamp comes on in the instrument panel and a message is displayed.
Visibility Special position of the windscreen wipers Operating fault If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode. Have it checked by PEUGEOT dealer or a qualified workshop. Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of the windscreen behind the rear view mirror. Switch off the automatic rain sensitive wipers when using an automatic car wash.
Visibility Lighting dimmer System for the manual adjustment of the brightness of the instrument panel and the touch screen to suit the ambient light level. LCD instrument panel Matrix instrument panel Touch screen Press the MENU button for access to the different menus. Select the "Settings" menu. Display the secondary page. In the secondary page, select "Screen settings".
Visibility Courtesy lamps Map reading lamps In this position, the courtesy lamp comes on gradually: - when the vehicle is unlocked, when the key is removed from the ignition, when opening a door, when the remote control locking button is pressed, in order to locate your vehicle. It switches off gradually: when the vehicle is locked, when the ignition is switched on, 30 seconds after the last door is closed. F With the ignition on, press the corresponding switch.
Visibility Interior mood lighting The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor. Switching on Settings The mood lighting settings can be adjusted in the touch screen. Instrument panel mood lighting Press the MENU button for access to the different menus. Select the "Driving" menu. Display the secondary page.
Visibility Panoramic glazed sunroof System which comprises configurable light guides and a panoramic tinted glass area to increase the light and visibility in the passenger compartment. It is fitted with an electric blind to improve temperature and acoustic comfort. Electric blind If something is trapped when operating the blind, you should reverse the movement of the blind. To do this press the control in question.
Safety General safety recommendations Labels are applied at various points on your vehicle. They carry safety warnings as well as vehicle identification information. Do not remove them: they form an integral part of your vehicle. We draw your attention to the following points: - For any work on your vehicle, use a qualified workshop that has the technical information, skills and equipment required, all of which a PEUGEOT dealer is able to provide.
Safety Direction indicators Hazard warning lamps Three flashes Visual warning with of all the direction indicators flashing to alert other road users to a vehicle breakdown, towing or accident. Move the stalk briefly upwards or downwards, without going beyond the point of resistance; the corresponding direction indicators will flash 3 times. F Lower the lighting control stalk fully when moving to the left. F Raise the lighting control stalk fully when moving to the right.
Safety Horn Emergency or assistance call Audible warning system to alert other road users to an imminent danger. This system allows you to make an emergency or assistance call to the emergency services or to the dedicated PEUGEOT service. F Press the central part of the multifunction steering wheel. Use the horn moderately and only in situations allowed by the motoring regulations in the country you are driving in.
Safety Under-inflation detection System which automatically checks the pressures of the tyres while driving. The system monitors the pressures in the four tyres, once the vehicle is moving. It compares the information given by the four wheel speed sensors with reference values, which must be reinitialised every time the tyre pressures are adjusted or a wheel changed. The system triggers an alert as soon as it detects a drop in the inflation pressure of one or more tyres.
Safety Reinitialisation Under-inflation alert This is given by fixed illumination of this warning lamp, accompanied by an audible signal and, depending on equipment, the display of a message. F Reduce speed immediately, avoid excessive steering movements and sudden braking F Stop the vehicle as soon as it is safe to do so. The loss of pressure detected does not always cause visible bulging of the tyre. Do not satisfy yourself with just a visual check.
Safety Without touch screen With touch screen Operating fault The flashing and then fixed illumination of the under-inflation warning lamp accompanied by illumination of the Service warning lamp indicates a fault with the system. F With the ignition on and the vehicle stationary, press this button for about 3 seconds then release it, an audible signal confirms the reinitialisation.
Safety Electronic stability control (ESC) A set of the following Electronic Stability systems: anti-lock braking system (ABS) and electronic brake force distribution (EBFD), emergency braking assistance, wheel anti-slip regulation (ASR) or traction control, dynamic stability control (DSC).
Safety Operation Anti-lock braking system (ABS) and electronic brake force distribution (EBFD) When this warning lamp comes on, accompanied by an audible signal and a message, it indicates that there is a fault with the ABS, which could cause loss of control of the vehicle when braking.
Safety Operating fault But it is recommended that the system be reactivated as soon as possible. Dynamic stability control (DSC) and anti-slip regulation (ASR) Activation These systems are activated automatically each time the vehicle is started. As soon as they detect a problem of grip or trajectory, these systems act on the operation of the engine and brakes. F Press the button or, depending on version, turn the knob to this position.
Safety Grip control Special patented traction control system which improves traction on snow, mud and sand. This system, the operation of which has been optimised for each situation, allows you to manoeuvre in most conditions of poor grip (encountered during touring use). Associated with all-seasons Peak Mountain Snow Flake tyres, this system offers a compromise between safety, adhesion and traction. These tyres work equally well in winter and summer.
Safety You can deactivate certain functions of the ESC (ASR and DSC) by turning the dial to the "OFF" position. These functions are reactivated automatically from 30 mph (50 km/h) or every time the ignition is switched back on. Driving advice All terrain (mud, damp grass, ...) Sand This mode, when moving off, allows considerable spin on the wheel with the least grip to optimise clearing of the mud and regain grip.
Safety Active City Brake Active City Brake is a driving assistance system that aims to avoid a frontal collision or reduce the speed of an impact if the driver does not react sufficiently (inadequate brake application). This system is designed to improve driving safety. It remains the driver’s responsibility to continuously monitor the state of the traffic and to assess the distances and relative speeds of other vehicles.
Safety Operation When your vehicle is too close to or approaches the vehicle ahead too quickly the system automatically applies the brakes to avoid a collision. The triggering of the system may cause the engine to stall, unless the driver depresses the clutch pedal quickly enough during automatic braking. You are then alerted by the display of a message. The brake lamps on your vehicle come on to warn other road users.
Safety Operating limits Deactivation The system is deactivated in the vehicle configuration menu, accessible with the ignition on. Its state is memorised when the ignition is switched off. With the touch screen The system only detects vehicles that are stationary or moving in the same direction as your vehicle. It does not detect small vehicles (bicycles, motorcycles), pedestrians or animals, nor non-reflective stationary objects.
Safety Operating faults In difficult weather conditions (very heavy rain, snow, fog, hail...), braking distances increase, which can reduce the ability of the system to avoid a collision. The driver must therefore remain particularly vigilant. Never leave accumulations of snow or any object projecting above the bonnet or in front of the roof: this might fall into the field of vision of the sensor and generate a detection.
Safety Seat belts Front seat belts The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity of the impact, the pretensioning system instantly tightens the seat belts against the body of the occupants. The pretensioning seat belts are active when the ignition is on.
Safety Rear seat belts Seat belt not fastened / unfastened warning lamp in the instrument panel When the ignition is switched on, this warning lamp comes on in the instrument panel. It remains on for a certain time if the front passenger has not fastened their seat belt. After this time, the warning lamp goes off if the driver’s seat belt is fastened.
Safety Recommendations for children Advice The driver must ensure that passengers use the seat belts correctly and that they are all fastened before setting off. Wherever you are seated in the vehicle, always fasten your seat belt, even for short journeys. Do not interchange the seat belt buckles as they will not fulfil their role fully. The seat belts are fitted with an inertia reel permitting automatic adjustment of the length of the strap to your size.
Safety Airbags Front airbags General information System designed to contribute towards improving the safety of the occupants (with the exception of the rear centre passenger) in the event of violent collisions. The airbags supplement the action of the seat belts fitted with force limiters (all except the centre rear passenger belt).
Safety To assure your child’s safety, you must deactivate the passenger’s front airbag when you install a rearward facing child seat on the front passenger seat. Otherwise, the child risks being seriously injured or killed if the airbag is deployed. Operating fault Deactivation Reactivation Only the passenger’s front airbag can be deactivated. F With the ignition off, insert the key into the passenger airbag deactivation switch.
Safety Lateral airbags Deployment The curtain airbag is deployed at the same time as the corresponding lateral airbag in the event of a serious side impact applied to all or part of the side impact zone B, perpendicular to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside towards the inside of the vehicle. The curtain airbag inflates between the front or rear occupant of the vehicle and the windows.
Safety Advice For the airbags to be fully effective, observe the safety recommendations below: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...), nor fix or attach anything close to the inflation trajectory of the airbags; this could cause injuries during their deployment. Never modify the original definition of your vehicle, particularly in the area directly around the airbags.
Child safety Carrying children Although one of PEUGEOT's main criteria when designing your vehicle, the safety of your children also depends on you.
Child safety In the front* Rearward facing Forward facing When a rearward-facing child seat is installed on the front passenger seat, adjust the seat to: the intermediate longitudinal position, with the backrest straightened for a seat without height adjuster, the intermediate longitudinal position and highest position, with the backrest straightened for a seat with height adjuster. The passenger airbag must be deactivated.
Child safety Deactivating the passenger's front airbag The warning label present on both sides of the passenger's sun visor repeats this advice. In line with current legislation, the following tables contain this warning in all of the languages required. Passenger airbag OFF Never install a rearward facing child restraint system on a seat protected by an active front airbag. This could cause the death of the child or serious injury. Only the passenger's front airbag can be deactivated.
Child safety AR BG НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето. CS NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ. DA Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT KVÆSTET eller DRÆBT.
Child safety MT Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla NL Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD.
Child safety Child seats recommended by PEUGEOT PEUGEOT offers a range of recommended child seats which are secured using a three point seat belt. Group 0+: from birth to 13 kg L1 "RÖMER Baby-Safe Plus" Installed in the rearward facing position. Groups 2 and 3: from 15 to 36 kg L4 "KLIPPAN Optima" From 22 kg (approximately 6 years), the booster is used on its own. 8 L5 "RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings. The child is restrained by the seat belt.
Child safety Locations for child seats secured with the seat belt In accordance with the European regulation, this table indicates the options for the installation of child seats secured using the seat belt and universally approved (a) in relation to the weight of the child and the seat in the vehicle.
Child safety (a) Universal child seat: child seat which can be installed in all vehicles using the seat belt. (b) Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed on the front passenger seat. (c) Consult the legislation in force in your country before installing your child on this seat.
Child safety Advice The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident. Ensure that there is no seat belt or seat belt buckle under the child seat, as this could destabilise it. Remember to fasten the seat belts or the child seat harnesses keeping the slack relative to the child's body to a minimum, even for short journeys.
Child safety "ISOFIX" mountings The ISOFIX child seats are fitted with two latches which are secured on the two rings A. Some seats also have an upper strap, known as the TOP TETHER, which is attached to ring B. Your vehicle has been approved in accordance with the latest ISOFIX regulation. The seats, represented below, are fitted with regulation ISOFIX mountings: - a ring B behind the seat for fixing the upper strap, referred to as the TOP TETHER.
Child safety ISOFIX child seats recommended by PEUGEOT "RÖMER Baby-Safe Plus and its Baby-Safe Plus ISOFIX base" (size category: E) Group 0+: from birth to 13 kg Installed "rearward facing" using an ISOFIX base which is attached to the rings A. The base has a support leg, adjustable for height, which sits on the vehicle's floor. This seat can be secured with a seat belt. In this case, only the shell is used and attached to the vehicle's seat by the three-point seat belt.
Child safety "RÖMER Duo Plus ISOFIX" (size category: B1) Group 1: from 9 to 18 kg Installed forward facing. Attached to the rings A and the upper ring B, referred to as the TOP TETHER, using an upper strap. Three seat body angles: sitting, reclining, lying down. This child seat can also be used on seats not equipped with ISOFIX mountings. In this case, it must be secured to the seat using the three-point seat belt.
Child safety Locations for child seats In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings. In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child seat next to the ISOFIX logo. Weight of the child / indicative age Type of ISOFIX child seat ISOFIX size category Less than 10 kg (group 0) Up to approx.
Child safety Electric child lock Remote control system to prevent opening of the rear doors using their interior controls. Switching off F With the ignition on, press this button again. The indicator lamp in the button goes off, accompanied by a message to confirm that the child lock is off. This indicator lamp remains off while the child lock is switched off. Switching on F With the ignition on, press this button.
Practical information Fuel tank Fuel tank capacity: approximately 50 litres. Low fuel level Refuelling When the fuel tank minimum level is reached this warning lamp comes on in the instrument panel. There remains approximately 5 litres of fuel in the tank. When the warning lamp flashes there is very little fuel remaining in the tank. You must refuel as soon as possible to avoid running out of fuel. For more information on running out of fuel (Diesel), refer to the corresponding section.
Practical information Fuel supply cut-off When you have filled the tank: F put the cap back in place, F turn the key to the right, then remove it from the cap, F close the flap. Your vehicle is fitted with a safety system that cuts off the supply of fuel in the event of an impact. If you have put in the wrong fuel for the engine of your vehicle, you must have the fuel tank drained and filled with the correct fuel before starting the engine.
Practical information Misfuel prevention (Diesel)* Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of engine damage that can result from filling with the wrong fuel. Located in the filler neck, the misfuel prevention device appears when the filler cap is removed. Operation When a petrol filler nozzle is introduced into the fuel filler neck of your Diesel vehicle, it comes into contact with the flap. The system remains closed and prevents filling.
Practical information Fuel used for petrol engines Fuel used for Diesel engines The petrol engines are compatible with E10 bio-petrol (containing 10 % ethanol), conforming to European standards EN 228 and EN 15376. E85 type fuels (containing up to 85 % ethanol) are reserved exclusively for vehicles marketed for the use of this type of fuel (BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15293.
Practical information Running out of fuel (Diesel) On vehicle fitted with HDi engines, the fuel system must be primed if you run out of fuel. For versions with a manual priming pump, refer to the drawing of the corresponding underbonnet view. If the tank on your vehicle is fitted with a misfuel prevention device, refer to the corresponding section. If the engine does not start first time, don't keep trying. Start the procedure again from the beginning. 174 1.6 litre BlueHDi engines 1.
Practical information AdBlue® and SCR system for BlueHDi Diesel engines To assure respect for the environment and conformity with the new Euro 6 emissions standard, without adversely affecting the performance or fuel consumption of Diesel engines, PEUGEOT has taken the decision to equip its vehicles with an effective system that associates SCR (Selective Catalytic Reduction) with a particle filter (FAP) for the treatment of exhaust gases.
Practical information Range indicators Once the AdBlue ® tank is on reserve or after detection of a fault with the SCR emissions control system, when the ignition is switched on, an indicator displays an estimate of the distance that can be covered, the range, before engine starting is prevented. In the event of simultaneous system fault and low AdBlue ® level, the shortest range figure is the one displayed.
Practical information Remaining range between 350 and 1500 miles (600 and 2 400 km) Remaining range between 0 and 350 miles (0 and 600 km) Breakdown related to a lack of AdBlue ® When switching on the ignition, this warning lamp comes on, accompanied by an audible signal and the display of a message (e.g.: "Top up emissions additive: Starting prevented in 900 miles") indicating the remaining range expressed in miles or kilometres.
Practical information In the event of a fault with the SCR emissions control system A system that prevents engine starting is activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions control system. Have the system checked by a PEUGEOT dealer or a qualified workshop as soon as possible.
Practical information Starting prevented Every time the ignition is switched on, these warning lamps come on, accompanied by an audible signal and the display of the message "Emissions fault: Starting prevented". Freezing of the AdBlue ® AdBlue ® freezes at temperatures below around -11°C. The SCR system includes a heater for the AdBlue ® tank, allowing you to continue driving in very cold conditions.
Practical information Topping-up the AdBlue® Filling the AdBlue ® tank is an operation included in every routine service on your vehicle by a PEUGEOT dealer or a qualified workshop. Nevertheless, given the capacity of the tank, it may be necessary to top-up the fluid between services, more particularly if an alert (warning lamps and a message) signals the requirement. You can go to a PEUGEOT dealer or a qualified workshop. If you envisage topping-up yourself, please read the following warnings carefully.
Practical information Recommendations on storage Procedure AdBlue ® freezes at about -11°C and deteriorates above 25°C. It is recommended that bottles be stored in a cool area and protected from direct sunlight. Under these conditions, the fluid can be kept for at least a year. If the additive has frozen, it can be used once it has completely thawed out. Before topping-up, ensure that the vehicle is parked on a flat and level surface.
Practical information Filling Closing F Pour the contents of the bottle into your vehicle's AdBlue ® tank. F Refit the blue cap to the tank and turn it a 6th of a turn clockwise, to its stop. F Refit the black cap and turn it a quarter of a turn clockwise without pressing. Ensure that the indicator on the cap lines up with the indicator on the support. F Depending on equipment, return the spare wheel and/or the storage box to the bottom of the boot. F Refit the boot carpet and close the tailgate.
Practical information Temporary puncture repair kit Repair kit with separate sealant cartridge (depending on version) Access to the kit Composition of the kit This kit is installed in the storage box, under the boot floor. 1. This kit comprises a compressor and a sealant cartridge. It allows the temporary repair of a tyre. You are then able to go to the nearest garage. It can be used for repairing most punctures on the tread or shoulder of the tyre.
Practical information Repair procedure F Switch off the ignition. F Secure the speed limit sticker inside the vehicle. Avoid removing any foreign bodies which have penetrated into the tyre. 184 F Uncoil the pipe stowed under the compressor. F Connect the pipe from the compressor to the sealant cartridge. F Turn the sealant cartridge and secure it in the cut-out provided on the compressor. F Remove the valve cap from the tyre to be repaired, and place it in a clean area.
Practical information If after around 5 to 7 minutes the pressure is not attained, this indicates that the tyre is not repairable; contact a PEUGEOT dealer or a qualified workshop for assistance. F Check that the compressor switch is at the "O" position). F Uncoil fully the electric cable, stowed under the compressor. F Connect the compressor's plug to the vehicle's 12 V socket. F Switch on the ignition.
Practical information Checking and inflating F Place the switch in the "O" position. F Remove the kit. F Drive immediately for approximately 3 miles (5 kilometres), at reduced speed (between 15 and 35 mph (20 and 60 km/h)), to plug the puncture. F Stop to check the repair and the tyre pressure using the kit. 186 To check and if necessary adjust the tyre pressures. F Remove the valve cap from the tyre and place it in a clean area. F Uncoil the pipe stowed under the compressor.
Practical information Tyre under-inflation detection After repair of the tyre, the warning lamp will remain on until the system is reinitialised. For more information on under-inflation detection, refer to the corresponding section. F Start the compressor by placing the switch at the "I" position and adjust the pressure to the value shown on the vehicle's tyre pressure label. To deflate: press the black button on the compressor pipe, at the valve connector.
Practical information Repair kit with integral sealant cartridge (depending on version) This kit comprises a compressor and a sealant cartridge. It allows the temporary repair of a tyre. You are then able to go to the nearest garage. It can be used for repairing most punctures on the tread or shoulder of the tyre. Its compressor can be used to check and adjust the pressure of the tyre. Access to the kit This kit is installed in the storage box, under the boot floor.
Practical information Description of the kit A. B. C. D. E. "Sealant" or "Air" position selector. On "I" / off "O" switch. Deflation button. Pressure gauge (in bars and psi). Compartment housing: - a cable with adaptor for 12 V socket, - various inflation adaptors for accessories, such as balls, bicycle tyres... F. G. H. I. Sealant cartridge. White pipe with cap for repair. Black pipe for inflation. Speed limit sticker.
Practical information Repair procedure 1. Sealing F Switch off the ignition. F Turn the selector A to the "sealant" position. F Check that the switch B is in position "O". Avoid removing any foreign bodies which have penetrated into the tyre. 190 F Uncoil the white pipe G fully. F Unscrew the cap from the white pipe. F Connect the white pipe to the valve of the tyre to be repaired. Take care, this product is harmful if swallowed and causes irritation to the eyes.
Practical information F Switch on the compressor by moving the switch B to position "I" until the tyre pressure reaches 2.0 bars. The sealant is injected into the tyre under pressure; do not disconnect the pipe from the valve during this operation (risk of splashing). Do not start the compressor before connecting the white pipe to the tyre valve: the sealant product would be expelled through the pipe. F Remove the kit and screw the cap back on the white pipe.
Practical information 2. Inflation F Turn the selector A to the "Air" position. F Uncoil the black pipe H fully. F Connect the black pipe to the valve of the wheel. F Connect the compressor's electric plug to the vehicle's 12 V socket. F Start the vehicle again and leave the engine running. As soon as possible, go to a PEUGEOT dealer or a qualified workshop. You must inform the technician that you have used this kit.
Practical information Removing the cartridge F F F F Stow the black pipe. Detach the angled base from the white pipe. Support the compressor vertically. Unscrew the cartridge from the bottom. Beware of discharges of fluid. The expiry date of the fluid is indicated on the cartridge. The sealant cartridge is designed for single use; even if only partly used, it must be replaced. After use, do not discard the cartridge into the environment, take it to an authorised waste disposal site or a PEUGEOT dealer.
Practical information Changing a wheel Procedure for changing a wheel for the spare wheel using the tools provided with the vehicle. Access to the tools 3. "Bolt cover" tool. For removing the bolt protectors (covers) on alloy wheels. 4. Socket for the security bolts (located in the glove box). For adapting the wheelbrace to the special "security" bolts. 5. Removable towing eye. For more information on the removable towing eye, refer to the corresponding section.
Practical information Access to the spare wheel* Wheel with wheel trim When refitting the wheel, refit the wheel trim starting by placing its cut-out facing the valve and press around its edge with the palm of your hand. Taking out the wheel F Unscrew the central (coloured) nut. F Raise the spare wheel towards you from the rear. F Take the wheel out of the boot. 9 The spare wheel is installed in the boot under the floor.
Practical information Putting the wheel back in place F Put the wheel back in its housing. F Unscrew the central (coloured) nut by a few turns then put it in place in the centre of the wheel. F Tighten fully until the central bolt clicks to retain the wheel correctly. F Put the box back in the centre of the wheel and clip it in place. F Refit the polystyrene storage box to restrain the unit.
Practical information Removing a wheel Parking the vehicle Immobilise the vehicle where it does not block traffic: the ground must be level, stable and not slippery. Apply the parking brake. Switch off the ignition. With a manual gearbox, engage first gear to block the wheels. With an electronic gearbox, place the gear selector at position R to block the wheels. With an automatic gearbox, place the gear selector at position P to block the wheels.
Practical information F Extend the jack 2 until it comes into contact with the jacking point A or B used; the contact area A or B on the vehicle must be correctly inserted into the central part of the head of the jack. F Raise the vehicle until there is sufficient space between the wheel and the ground to admit the spare (not punctured) wheel easily. F Remove the bolts and store them in a clean place. F Remove the wheel.
Practical information Fitting a wheel After changing a wheel Fitting the "space-saver" spare wheel If your vehicle is fitted with alloy wheels, when tightening the bolts on fitting, it is normal to notice that the washers do not come into contact with the "spacesaver" spare wheel. The wheel is secured by the conical shoulder of each bolt (see drawing). When refitting the alloy wheel, ensure that the wheel bolt washers are clean and in good condition.
Practical information List of operations F Put the wheel in place on the hub. F Screw in the bolts fully by hand. F Pre-tighten the security bolt using the wheelbrace 1 fitted with the security socket 4 (if your vehicle has them). F Pre-tighten the other bolts using the wheelbrace 1 only. 200 F Lower the vehicle fully. F Fold the jack 2 and detach it. F Tighten the security bolt using the wheelbrace 1 fitted with the security socket 4 (if your vehicle has them).
Practical information Snow chains In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking. The snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels. Use only the chains designed to be fitted to the type of wheel fitted to your vehicle: Original tyre size Maximum link size.
Practical information Changing a bulb The headlamps have polycarbonate lenses with a protective coating: F do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, F use a sponge and soapy water or a pH neutral product, F when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals. Front lamps 1.
Practical information Changing direction indicator bulbs Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side. F Turn the bulb holder an eighth of a turn anti-clockwise and extract it. F Remove the bulb and change it. To reassemble, carry out these operations in reverse order. Changing dipped beam headlamp bulbs Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.
Practical information Changing main beam headlamp bulbs F Remove the protective cover by pulling on the tab. F Disconnect the bulb connector. F Pull out the bulb and replace it. 204 To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom. Daytime running lamps / sidelamps (light-emitting diodes - LEDs) For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.
Practical information Changing front foglamp / directional lamps Changing integrated direction indicator side repeater bulbs F Access to the front foglamp is through the orifice below the bumper. F Disconnect the bulb holder connector by pressing on the top of the tongue. F Extract the bulb holder by pressing on the two clips clips (top and bottom). F Replace the module. To reassemble, carry out these operations in reverse order. F Insert a flat screwdriver between the mirror glass and its base.
Practical information Rear lamps 1. 2. 3. 206 Brake lamps (P21W) (light-emitting diodes-LEDs). Sidelamps (light-emitting diodes - LEDs). Direction indicators (PY21W amber) (light-emitting diodes-LEDs). 4. 5. Foglamp (P21W). Reversing lamp (P21W). Light-emitting diodes LEDs For replacement, contact a PEUGEOT dealer or qualified workshop.
Practical information Changing the third brake lamp (light-emitting diodes - LEDs) Number plate lamps Changing a foglamp or reversing lamp bulb Contact a PEUGEOT dealer or a qualified workshop. To facilitate the removal of the lamp, carry out this operation with the tailgate half open. F Insert a thin screwdriver into the lens cutout. F Push it outwards. F Remove the lens. F Change the faulty bulb. To refit, press on the lens to clip it in place. Access is by passing a hand under the bumper.
Practical information Changing a fuse Accessing the tools The extraction tweezer is fitted to the back of the fusebox cover located inside the glove box. F Open the glove box lid, F unclip the fusebox cover by pulling at the top right, F disengage the cover completely and turn it over, 208 F remove the carrier on which the tweezer is fitted.
Practical information Changing a fuse Before changing a fuse: F the cause of the failure must be identified and rectified, F all electrical consumers must be switched off, F the vehicle must be immobilised with the ignition off, F identify the failed fuse using the tables and layout drawings in the following pages. To replace a fuse, you must: F use the special tweezer to extract the fuse from its housing and check the condition of its filament.
Practical information Fuses in the dashboard Fuse tables The fusebox is placed in the lower dashboard (right-hand side). Access to the fuses 210 Fuse N° Rating Functions F01 40 A Heated rear window. F02 10 A Heated door mirrors. F03 30 A Front one-touch windows. F04 - F05 30 A Rear one-touch windows. F06 10 A Folding door mirrors. F07 10 A Folding door mirrors. F08 - F09 15 A Front electric windows (not one-touch). F10 20 A Hi-Fi amplifier. F11 - Not used.
Practical information Fuses in the glove box Fuse N° Rating Functions F2 5A Door mirrors, headlamps, diagnostic socket. F9 5A Alarm. F10 5A Independent telematic unit. F11 5A Electrochrome rear view mirror, additional heating, Active City Brake. F13 5A Hi-Fi amplifier, parking sensors, reversing camera F16 15 A Front 12 V socket. F17 15 A Audio system (without touch screen). F18 20 A Touch screen, audio system (if touch screen).
Practical information 212 Fuse N° Rating Functions F23 5A Vanity mirrors, map reading lamps. F26 15 A Horn. F27 15 A Screenwash pump. F28 5A Anti-theft. F29 15 A Air conditioning compressor. F30 15 A Rear wiper.
Practical information Fuses under the bonnet Fuse table Fuse N° Rating Functions F16 15 A Daytime running lamps. F18 10 A Right hand main beam headlamp. F19 10 A Left hand main beam headlamp. F25 30 A Headlamp wash relay (accessory). F29 40 A Front wiper motor. F30 80 A Pre-heater plugs (Diesel). The fusebox is placed in the engine compartment near the battery (left-hand side). Access to the fuses F Unclip the cover. F Change the fuse (see corresponding paragraph).
Practical information 12 V battery Procedure for starting the engine using another battery or charging a discharged battery. General points Lead-acid starter batteries Batteries contain harmful substances such as sulphuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. Take used remote control batteries and vehicle batteries to a special collection point. Protect your eyes and face before handling the battery.
Practical information Access to the battery Starting using another battery When your vehicle's battery is discharged, the engine can be started using a slave battery (external or on another vehicle) and jump lead cables or a battery booster. The battery is located under the bonnet. To gain access to it: F open the bonnet using the interior release lever, then the exterior safety catch, F secure the bonnet stay, F lift the plastic cover on the (+) terminal. The (-) battery terminal is not accessible.
Practical information F Start the engine of the vehicle with the good battery and leave it running for a few minutes. F Operate the starter on the broken down vehicle and let the engine run. If the engine does not start straight away, switch off the ignition and wait a few moments before trying again. F Raise the plastic cover on the (+) terminal, if your vehicle has one.
Practical information If you envisage charging your vehicle's battery yourself, use only a charger compatible with lead-acid batteries of a nominal voltage of 12 V. If this label is present, it is essential to use only a 12 V charger, to avoid causing irreversible damage to the electrical components related to the Stop & Start system. Follow the instructions for use provided by the manufacturer of the charger. Never reverse polarities. It is not necessary to disconnect the battery.
Practical information Quick-release terminal Before disconnecting the battery Wait 2 minutes after switching off the ignition before disconnecting the battery. Close the windows and the doors before disconnecting the battery. Disconnecting the (+) cable F Raise the lever D fully to release the cable terminal clamp E. Reconnecting the (+) cable F Position the open clamp E of the cable on the positive post (+) of the battery. F Press vertically on the clamp E to position it correctly on the battery.
Practical information Load reduction mode Electrical energy economy mode System which manages the use of certain functions according to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning, the heated rear screen... The deactivated functions are reactivated automatically as soon as conditions permit.
Practical information Changing a wiper blade Before removing a front wiper blade F Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing F Raise the corresponding wiper arm. F Unclip the wiper blade and remove it. 220 Fitting F Put the corresponding new wiper blade in place and clip it. F Fold down the wiper arm carefully. After fitting a front wiper blade F Switch on the ignition.
Practical information Towing Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Towing eye General recommendations Observe the legislation in force in your country. Ensure that the weight of the towing vehicle is higher than that of the towed vehicle. The driver must remain at the wheel of the towed vehicle and must have a valid driving licence.
Practical information Towing your vehicle Towing another vehicle F Place the gear lever in neutral (position N on an electronic or automatic gearbox). Failure to observe this instruction could result in damage to certain components (braking, transmission...) and the absence of braking assistance the next time the engine is started. F On the front bumper, unclip the cover by inserting the flat end of the towing eye in the bottom of the cover. F Screw the towing eye in fully. F Install the towing arm.
Practical information Towing a trailer We recommend the use of genuine PEUGEOT towbars and their harnesses that have been tested and approved from the design stage of your vehicle, and that the fitting of the towbar is entrusted to a PEUGEOT dealer or a qualified workshop. If the towbar is not fitted by a PEUGEOT dealer, it must still be fitted in accordance with the vehicle manufacturer's instructions.
Practical information When towing Distribution of loads F Distribute the load in the trailer so that the heaviest items are as close as possible to the axle and the nose weight approaches the maximum permitted without exceeding it. Air density decreases with altitude, thus reducing engine performance. Above 1 000 metres, the maximum towed load must be reduced by 10 % for every 1 000 metres of altitude.
Practical information Towbar with quickly detachable towball Presentation This towbar allows the towball to be fitted and removed quickly and easily without the use of tools. Installed behind the rear bumper, the towbar is invisible after removing the towball and folding the trailer harness socket carrier. 1. 2. 3. 4. 5. 6. 7. 8. 9. Carrier. Protective blanking plug. Security ring. Folding trailer harness socket. Detachable towball. Locking / unlocking wheel. Security key lock. Ball protector.
Practical information Before each use After use Check that the towball is correctly fitted by verifying the following points: the towball is correctly locked in place (position A), the security key lock is on and the key removed; the locking wheel can no longer be operated, the towball must no longer move at all in its carrier; try to shake it by hand.
Practical information Take the towball in both hands; insert the end of the towball into the carrier, then, to ensure that it has correctly locked in place, pull firmly down on the ball end of the towball. The locking wheel automatically turns a quarter of a turn anti-clockwise, making a perceptible click; take care to keep your hands clear. Check that the towball has correctly locked in place (position A). Turn the key anti-clockwise to lock the towball fixing mechanism.
Practical information Removing the towball Disconnect the trailer harness from the socket on the carrier. Detach the cable on the trailer from the security ring on the carrier. Unhook the trailer from the towball. Return the trailer harness connector carrier to the folded position. Insert the key into the lock. Turn the key clockwise to unlock the towball fixing mechanism. Grasp the towball firmly with one hand; with the other hand, press and turn the locking wheel clockwise as far as it will go.
Practical information Refit the protective cover for the ball. Stow the towball in its bag. Refit the protective blanking plug to the carrier. Maintenance Stowing the towball Correct operation is only possible if the towball and its carrier remain clean. Before cleaning the vehicle with a high pressure jet wash, the towbar harness socket carrier must be folded away, the towball removed and the protective blanking plug inserted in the carrier.
Practical information Fitting roof bars Advice on care and maintenance Contact a PEUGEOT dealer or a qualified workshop for the installation of longitudinal bars. To install transverse roof bars, observe the fitting positions indicated by markings on the longitudinal roof bars. Recommendations on the care and maintenance of your vehicle are given in the warranty and maintenance record.
Practical information Accessories A wide range of accessories and genuine parts is available from the PEUGEOT dealer network. These accessories and parts are all suitable for your vehicle and benefit from PEUGEOT's recommendation and warranty. Conversion kits "Transport solutions": "Security and safety": You can obtain an "Enterprise" kit to convert a private car into a trade vehicle. boot liner, luggage net, roof bars, bicycle carrier on roof bars, ski carrier, roof box, ...
Practical information "Multimedia": audio systems, portable satellite navigation systems, semi-integral support for portable satellite navigation system, hands-free kit, speakers, connection kit for MP3 or CD player, CD player for touch screen...
PEUGEOT & TOTAL, A PARTNERSHIP TO DELIVER BETTER PERFORMANCE! 2015 was marked by PEUGEOT's return to RallyRaid, one of the most difficult motorsport disciplines in the world. To obtain the best performance in these trials, PEUGEOT Sport chose TOTAL QUARTZ for the PEUGEOT 2008 DKR, a lubricant of high technology which protects the engine in the most severe conditions. TOTAL QUARTZ protects your engine against the effects of time.
Checks Bonnet Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode. Opening A. Interior release lever. F Open the left hand front door. F Pull the release lever A, located at the bottom of the door aperture, towards you. The location of the interior release lever prevents opening of the bonnet when the left hand front door is closed. 234 B. Exterior safety catch. C. Bonnet stay.
Checks Petrol engines 1. 2. 3. 4. 5. 6. 7. 8. Screenwash reservoir. Coolant header tank. Brake fluid reservoir. Battery / Fuses. Fusebox. Air filter. Engine oil dipstick. Engine oil filler cap.
Checks Diesel engines 1. 2. 3. 4. 5. 6. 7. 8. 9. Screenwash reservoir. Coolant header tank. Brake fluid reservoir. Battery / Fuses. Fusebox. Air filter. Engine oil dipstick. Engine oil filler cap. Priming pump (depending on engine). The AdBlue ® tank is located in the boot below the spare wheel and/or the storage well.
Checks Checking levels Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a PEUGEOT dealer or a qualified workshop. Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any time (even with the ignition off).
Checks Coolant level The coolant level should be close to the "MAX" mark but should never exceed it. When the engine is warm, the temperature of the coolant is regulated by the fan. The cooling fan may start after switching off the engine: take care with articles and clothing that might be caught by the fan blades. In addition, as the cooling system is pressurised, wait at least one hour after switching off the engine before carrying out any work.
Checks Diesel additive A low additive level is indicated by illumination of the service warning lamp, accompanied by an audible warning and a message in the screen (if a display screen is fitted). Topping-up This additive must be topped-up by a PEUGEOT dealer or a qualified workshop without delay. Used products Avoid prolonged contact of used oil or fluids with the skin. Most of these fluids are harmful to health or indeed very corrosive. Do not discard used oil or fluids into sewers or onto the ground.
Checks Checks Unless otherwise indicated, check these components in accordance with the warranty and maintenance record and according to your engine. Otherwise, have them checked by a PEUGEOT dealer or a qualified workshop. 12 V battery Air filter and passenger compartment filter Diesel The battery does not require any maintenance. However, check regularly that the terminals are correctly tightened (versions without quick release terminals) and that the connections are clean.
Checks Manual gearbox The gearbox does not require any maintenance (no oil change). Refer to the warranty and maintenance record for the checking interval for this component. Electronic gearbox The gearbox does not require any maintenance (no oil change). Refer to the manufacturer's service schedule for the checking interval for this component. Automatic gearbox The gearbox does not require any maintenance (no oil change).
Technical data General information Engine characteristics Weights and towed loads The engine characteristics (capacity, maximum power, maximum power speed, fuel, CO2 emissions...) for your vehicle are given in the registration document, as well as in sales brochures. These characteristics correspond to the values type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC). For more information, contact a PEUGEOT dealer or a qualified workshop.
Technical data Engines and gearboxes - PETROL Engine Gearbox Model code: CU 1.2 litre PureTech 82 1.2 litre PureTech 82 S&S 1.2 litre PureTech 110 S&S Manual (5-speed) ETG5 electronic (5-speed) ETG5 electronic (5-speed) Manual (5-speed) Automatic (6-speed) HMZ0 HMZ6 HMZ0/P HMZ6/PS HNZ6/S HNVT/S HNZT/S Cubic capacity (cc) 1 199 1 199 1 199 1 199 Bore x Stroke (mm) 75 x 90.5 75 x 90.5 75 x 90.5 75 x 90.
Technical data Engines and gearboxes - PETROL 1.2 litre PureTech 130 S&S Engine Gearbox Model code: CU 1.
Technical data Weights and towed loads (in kg) - PETROL Engine 1.2 litre PureTech 82 1.2 litre PureTech 82 S&S 1.
Technical data Weights and towed loads (in kg) - PETROL 1.2 litre PureTech 130 S&S Engine Gearbox Model code: CU 1.
Technical data Engines and gearboxes - DIESEL Engine Gearbox 1.6 litre BlueHDi 75 1.6 litre BlueHDi 100 Manual (5-speed) Manual (5-speed) Model code: CU BHW6 BHYK BHY6 Cubic capacity (cc) 1 560 1 560 Bore x Stroke (mm) 75 x 88.3 75 x 88.
Technical data Engines and gearboxes - DIESEL Engine 1.6 litre e-HDi 92 Gearbox Model code: CU Manual (5-speed) ETG6 electronic (6-speed) 9HP0/S 9HP8/PS 1.6 litre BlueHDi 100 S&S 1.6 litre BlueHDi 116** S&S 1.6 litre BlueHDi 120 S&S Manual (5-speed) Manual (6-speed) Manual (6-speed) BHXM/S BHZM/S BHYK/S BHY6/S Cubic capacity (cc) 1 560 1 560 1 560 1 560 Bore x Stroke (mm) 75 x 88.3 75 x 88.3 75 x 88.3 75 x 88.
Technical data Weights and towed loads (in kg) - DIESEL Engine Gearbox Model code: CU 1.6 litre BlueHDi 75 1.
Technical data Weights and towed loads (in kg) - DIESEL Engine Gearbox Model code: CU 1.6 litre BlueHDi 100 S&S 1.
Technical data Weights and towed loads (in kg) - DIESEL 1.6 litre BlueHDi 116*** S&S 1.
Technical data Dimensions (in mm) * Mirrors folded.
Technical data Identification markings Various visible markings for the identification of your vehicle. It bears the following information: the tyre inflation pressures with and without load, the tyre sizes, the inflation pressure of the spare wheel, the paint colour code. A. Vehicle Identification Number (VIN) under the bonnet. This number is engraved on the bodywork near the damper support. B. Vehicle identification Number (VIN) on the windscreen lower crossmember.
Audio and Telematics Emergency call PEUGEOT Connect SOS Test of operation of the system: The green indicator lamp comes on for 3 seconds when the ignition is switched on, signifying that a call can be made. Contact a PEUGEOT dealer if the orange indicator lamp comes on: flashing, then off: the system has a fault. on fixed: the back-up battery must be replaced. In either case, the emergency and assistance calls service may not work. Contact a PEUGEOT dealer as soon as possible.
Audio and Telematics Assistance call PEUGEOT Connect Assistance In the event of a breakdown, pressing for more than 2 seconds starts the call. A voice message confirms that the call has been made. Inadvertent press: pressing again immediately cancels the call. A voice message confirms the cancellation. If an impact is detected by the airbag control unit, and independently of the deployment of any airbags, an emergency call is made automatically.
Audio and Telematics 7-inch touch screen GPS satellite navigation - Multimedia audio - Bluetooth® telephone Contents First steps 258 Steering mounted controls 260 Menus 261 Navigation 262 Navigation - Guidance 270 274 Traffic Radio Media 276 Radio 282 DAB (Digital Audio Broadcasting) radio 284 Media 286 Settings 290 Connected services 298 299 Internet browser MirrorLinkTM 302 CarPlay ® 306 Telephone 310 Frequently asked questions 318 The system is protected in such a way that it will only operate in your
Audio and Telematics First steps Use the buttons to the left of the touch screen for access to the menu carousels, then press the virtual buttons in the touch screen. Each menu is displayed in one or two pages (primary page and secondary page). In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of 5 minutes.
Audio and Telematics Short-cuts: using the touch buttons in the upper band of the touch screen, it is possible to go directly to the selection of audio source, the list of stations (or titles, depending on the source). In very hot conditions, the volume may be limited to protect the system. The return to normal takes place when the temperature in the passenger compartment drops. Press on Menu to display the menu carrousel. Selection of audio source (depending on version): FM /DAB* /AM stations.
Audio and Telematics Steering mounted controls Press: mute on / off. Increase volume. Decrease volume. Change audio source: radio, media. 260 Radio, rotate: automatic search for the previous / next station. Radio, press: preset stations. Media, rotate: previous / next track. Press: confirm a selection. Telephone: start or answer a call. Call in progress: telephone menu (end call, secret mode, hands-free mode).
Audio and Telematics Menus Navigation Radio Media Settings (Depending on equipment) Enter navigation settings and choose a destination. Connected services Select an audio source, a radio station, display photographs. Telephone Adjust the settings for sound (balance, ambience, ...) and the display (language, units, date, time, ...). Driving (Depending on equipment) Connect using the "Internet browser". Operate certain applications on your smartphone via MirrorLinkTM or CarPlay ®.
Audio and Telematics Navigation Level 1 Level 2 Navigation 262 Level 3 Route settings
Audio and Telematics Level 1 Level 2 Level 3 Enter destination Comments Display recent destinations. Fastest Shortest Time/distance Ecological Tolls Route settings Choose the navigation criteria. The map displays the route chosen according to these criteria. Ferries Navigation Traffic Strict-Close Settings Navigation Show route on map Display the map and start navigation. Confirm Save the options. Save current location Save the current address.
Audio and Telematics Level 1 Level 2 Enter destination Navigation Level 3 Address For managing contacts and their addresses, refer to the "Telephone" section. Contacts To use the telephone functions, refer to the "Telephone" section.
Audio and Telematics Level 1 Level 2 Level 3 Comments Current loc. Point of interest Address settings Town center Address Save Save the current address. Add waypoint Add a waypoint to the route. Navigate to Press to calculate the route. Addresses Navigation View Secondary page Contacts Enter destination Navigate to Select a contact then calculate the route. Search for contact Call On the map Display the map and zoom to view the roads.
Audio and Telematics Level 1 Navigation Level 2 Search for a point of interest Point of interest displayed on the map 266 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All POIs Navigation Secondary page Search for POI Motor Dining/hotels Personal Search Navigation List of categories available. After choosing the category, select the points of interest. Save the settings. Select all Delete Choose the display settings for POIs. Secondary page Import POIs Show POIs Confirm Save the options. .
Audio and Telematics Level 1 Level 2 Level 3 Diversion Traffic messages Map settings Map settings Navigation Settings Settings Settings 268 Moving between the two menus.
Audio and Telematics Level 1 Level 2 Level 3 Comments On the route Navigation Around vehicle Settings for the choice of messages and the filter radius. Near destination Secondary page Detour over a distance Traffic messages Detour Recalculate route Finish Save your selections. Flat view north heading Orientation Flat view vehicle heading Perspective view Navigation Choose the display and orientation of the map.
Audio and Telematics Navigation - Guidance Choosing a new destination Towards a new destination Press on Navigation to display the primary page. Select "Save" to save the address entered as a contact entry. The system allows up to 200 entries. Press on the secondary page. To delete navigation information, press on "Settings". Press on "Stop navigation". Select "Navigate to". Select "Enter destination". To resume navigation press on "Settings".
Audio and Telematics Towards a recent destination Press on Navigation to display the primary page. Press on the secondary page. Towards a contact To be able to use navigation "towards a contact in the directory", it is first necessary to enter the address for your contact. Select a destination from the contacts in the list offered. Select "Navigate to". Select "Enter destination". Press on Navigation to display the primary page. Press on the secondary page. Select an address from the list offered.
Audio and Telematics Towards GPS coordinates Towards a point on the map Towards points of interest (POI) Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Press on Navigation to display the primary page. Select "Enter destination". Select "Enter destination". Press on the secondary page. Select "Address". Select "On the map". Select "Search for POI".
Audio and Telematics An annual mapping update allows new points of interest to be presented to you. You can also update the Risk areas / Danger areas every month. The detailed procedure is available on: http://peugeot.navigation.com. .
Audio and Telematics Traffic Traffic information Risk areas / Danger zone alert settings Press on Navigation to display the primary page. Press on the secondary page. Display of messages This series of alerts and displays is only available if Risk areas have first been downloaded and installed on the system. Press on Navigation to display the primary page. Press on the secondary page. Select "Traffic messages". Select "Settings". Select "Alarm!" (Alert).
Audio and Telematics Setting filters Select the message from the list offered. Receiving TA messages Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Select "Settings". Select "Traffic options". Select "Voice". Select the magnifying glass to have voice information.
Audio and Telematics Radio Media Level 1 Level 2 List of FM stations Save 276
Audio and Telematics Level 1 Level 2 Comments Radio Media List of FM stations Press on a radio station to select it. List FM Radio DAB Radio AM Radio USB CD Radio Media MirrorLinkTM Source Select change of source. CarPlay ® iPod Bluetooth AUX Jukebox Radio Media Press an empty location to Save it. Save .
Audio and Telematics Level 1 Level 2 Level 3 List of FM stations Media Photos Copy to Jukebox 278 Manage Jukebox
Audio and Telematics Level 1 Radio Media Level 2 Level 3 Comments Save Press a radio station to select it. Update list Update the list of stations received. Frequency Enter the desired radio frequency. Confirm Save the settings. Home screen Display the selected photo in the home page. Rotate Rotate the photo 90°. Select all Select all the photos in the list. Press again to deselect. Secondary page Radio list Radio Media Secondary page Photos Previous photo. Slideshow Pause / Play.
Audio and Telematics Level 1 Level 2 Level 3 Media Settings Settings Settings 280
Audio and Telematics Level 1 Level 2 Level 3 Comments Radio Media Secondary page Presentation of the last media used. Media list Shuffle (all tracks) Media Shuffle (current album) Choose the play settings. Settings Repeat Aux. amplification RDS options Radio Media Secondary page Radio Settings DAB/FM station tracking Display Radio Text Activate or deactivate the settings.
Audio and Telematics Radio Selecting a station Changing a radio frequency Press on Radio Media to display the primary page. Select "Save". Press on Radio Media to display the primary page. Select a preset radio station in the list. Select "List" in the primary page. If necessary, select change of source. Or Press on Radio Media to display the primary page. By automatic frequency search Select "FM Radio". Press 3 or 4 to move the cursor for an automatic search down or up for a radio frequency.
Audio and Telematics Presetting a station OR Select a radio station or frequency (refer to the corresponding section). Press on Radio Media to display the primary page. Press on "Save" (preset). Activating / Deactivating RDS Press on Radio Media to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Press on Frequency. Select a number in the list to preset the previously chosen radio station. A long press on a number saves (presets) the station.
Audio and Telematics DAB (Digital Audio Broadcasting) radio Display of the name of the current station. Short-cut: access to the choice of audio source and the list of stations (or titles, depending on the source). Select the radio station. Any thumbnail broadcast by the station. Select the audio source. Display the "DAB" band. Manage the Jukebox. Display current action. Display of "Radiotext" for the current station. Secondary page. Next "Multiplex". Next radio station. Previous "Multiplex".
Audio and Telematics Digital radio Digital radio provides higher quality reception and also the graphical display of current information on the radio station being listened to. Select "List" in the primary page. The range of multiplexes available is displayed in alphabetical order. DAB / FM auto tracking "DAB" does not cover 100% of the territory.
Audio and Telematics Media USB player Auxiliary (AUX) socket Selecting the source Press on Radio Media to display the primary page. Select change of source. 286 Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied). Connect the portable device (MP3 player…) to the auxiliary Jack socket using an audio cable (not supplied).
Audio and Telematics Information and advice The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg and. mp3" file extensions and with a bit rate of between 32 Kbps and 320 Kbps. It also supports VBR (Variable Bit Rate) mode. No other type of file (.mp4,...) can be played. ".wma" files must be of the standard wma 9 type. The sampling rates supported are 32, 44 and 48 KHz. It is advisable to restrict file names to 20 characters, without using of special characters (e.g.
Audio and Telematics Bluetooth® audio streaming Connecting Apple® players Streaming allows audio files on your telephone to be played through the vehicle's speakers. Connect the telephone: see the "Telephone" section, then "Bluetooth". Choose the "Audio" or "All" profile. If play does not start automatically, it may be necessary to start the audio playback from the telephone. Control is from the peripheral device or by using the audio system buttons.
Audio and Telematics Managing the Jukebox Select the magnifying glass to enter the folder or album and select audio file by audio file. Connect the device (MP3 player...) to the USB port or auxiliary Jack socket using a suitable audio cable. Select "Confirm" then "Copy". When no audio file is copied to the system, which has a capacity of 8 GB, all of the Jukebox function symbols are greyed and are not available. Select "New folder" to create a folder structure in the Jukebox. Select "Media list".
Audio and Telematics Settings Level 1 Level 2 Level 3 Audio settings Audio settings Audio settings 290
Audio and Telematics Level 1 Settings Audio settings Settings Turn off screen Level 2 Level 3 Comments Ambience Choose the sound ambience. Balance Sound distribution using the Arkamys ® system. Sound effects Set the volume or activate the link to vehicle speed. Ringtones Set the telephone ringtone and volume. Voice Set the volume and voice for speaking street names. Confirm Save your settings. Function that turns off the display. Pressing the screen reactivates it. .
Audio and Telematics Level 1 Level 2 Units Factory settings Configuration Adjust date and time Display screen 292
Audio and Telematics Level 1 Level 2 Comments Units Set the units used to display distance, fuel consumption and temperature. Delete data Select the desired data in the list then press Delete. Factory settings Return to factory settings. Confirm Save the settings. Confirm Set the date and time then confirm.
Audio and Telematics Level 1 Level 2 Choice of language Configuration Calculator Calendar 294
Audio and Telematics Level 1 Level 2 Comments Settings Secondary page Confirm Select the language then confirm. Languages Settings Secondary page Select the calculator. Calculator Settings Secondary page Select the calendar. Calendar .
Audio and Telematics Audio settings Press on Settings to display the primary page. Select "Audio settings". Select "Ambience" Or "Balance" Or The distribution (or spatialisation using the Arkamys ® system) of sound is an audio process that allows the audio quality to be adapted to the number of passengers in the vehicle. Available only with the 6-speaker configuration. The audio settings (Ambience, Bass:, Treble: and Loudness) are different and independent for each sound source.
Audio and Telematics Modifying system settings Press on Settings to display the primary page. Press on Settings to display the primary page. Press on Settings to display the primary page. Press on the secondary page. Press on the secondary page. Press on the secondary page. Select "System Settings". Select "Screen settings". Select "Time/Date" to change the time zone, synchronisation with GPS, the time and its format, then the date.
Audio and Telematics Connected services Level 1 298 Level 2 Level 3
Audio and Telematics Internet browser Press on Connected services to display the primary page. Press on "Internet browser" to display the browser home page; first connect your smartphone by Bluetooth, "Internet" option, see the "Telephone" section. Authentication for Internet browsing via a smartphone is done using the Dial-Up Networking (DUN) standard. Some smartphones of the latest generation do not support this standard. .
Audio and Telematics Level 1 Level 2 Bluetooth (devices) Internet connection settings Usage monitor Wi-Fi connection 300
Audio and Telematics Level 1 Connected services Level 2 Search Start the search for a device to connect. Connect /Disconnect Start or end the Bluetooth connection to the selected device. Update Import contacts from the selected telephone to save them in the audio system. Delete Delete the selected telephone. Confirm Save the settings. Secondary page Bluetooth connections Connected services Reset Secondary page Transfer rate Comments Reset the usage monitor, them confirm.
Audio and Telematics MirrorLinkTM Optional depending on the smartphone and operating system.
Audio and Telematics MirrorLinkTM smartphone connection As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the MirrorLinkTM technology to be displayed in the vehicle's screen. The principles and standards are constantly evolving.
Audio and Telematics Level 1 304 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Access or return to the applications already downloaded to your smartphone and adapted to MirrorLinkTM technology. Connected services MirrorLinkTM Access to a menu list depending on the application chosen. "Back": abandon the current operation, go up one level. "Home": access or return to the "Car mode" page. Access to the "Connected services" primary page. .
Audio and Telematics CarPlay® 306
Audio and Telematics CarPlay® smartphone connection Connect a USB cable. The smartphone charges when connected by a USB cable. As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the CarPlay ® technology to be displayed in the vehicle's screen.
Audio and Telematics Level 1 308 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Favourites Calls Telephone Contacts Keypad The "Telephone" function is placed automatically in "Siri" voice mode. Press on "Display contacts" for access to the telephone menus. Messages Lists Artists Music Tracks Albums Press on "Music" to browse and select the tracks on your smartphone. Press on "Playing" for access to the track currently playing. Connected services Other...
Audio and Telematics Telephone Level 1 Level 2 Call log Contacts 310 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All calls Incoming calls Outgoing calls Telephone After making choices, start the call. Contacts Call log View Magnifying glass Create Call Addresses Create Modify Delete View Telephone Delete all Contacts By name After making choices, start the call. Confirm Navigate to Search for contact Call .
Audio and Telematics Level 1 Level 2 Bluetooth (devices) Telephone connection Devices detected Telephone Options 312 Level 3
Audio and Telematics Level 1 Telephone connection Level 2 Level 3 Search Connect / Disconnect Start or stop the Bluetooth connection to the selected peripheral device. Update Import the contacts from the selected telephone to store them in the audio system. Delete Delete the selected telephone. Confirm Save the settings.
Audio and Telematics Pairing a Bluetooth® telephone For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Procedure (short) from the telephone Procedure from the system Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).
Audio and Telematics Connecting a Bluetooth® peripheral device Automatic reconnection The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts. If not, select "Update".
Audio and Telematics Managing paired telephones This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing. Receiving a call An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on the steering mounted TEL button to accept an incoming call. Press on Telephone to display the primary page. Make a long press Press on the secondary page. on the steering mounted TEL button to reject the call.
Audio and Telematics Managing contacts / entries Select "Contacts". Press on Telephone to display the primary page. Select "By name" to view the list of contacts. Select "Contacts". Select the desired contact from the list offered. Select "Call". Select "View". Calling a recently used number Select "Create" to add a new contact. Press on Telephone to display the primary page. Or "Modify" to edit the selected contact. Select "Call log". Or Select the desired contact from the list offered.
Audio and Telematics Frequently asked questions The following table groups together the answers to the most frequently asked questions concerning your audio system. Navigation QUESTION 318 ANSWER SOLUTION The route calculation is not successful. The route settings may conflict with the current location (exclusion of Check the route settings in the "Navigation" toll roads on a toll motorway). menu. The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
Audio and Telematics QUESTION Certain traffic jams along the route are not indicated in real time. The altitude is not displayed. ANSWER SOLUTION On starting, it is several minutes before the system begins to receive Wait until the traffic information is being received the traffic information. correctly (display of the traffic information icons on the map). The filters are too restrictive. Modify the settings. In certain countries, only major routes (motorways...
Audio and Telematics Radio QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...). I cannot find some radio stations in the list of stations received. The name of the radio station changes. 320 ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
Audio and Telematics Media QUESTION ANSWER SOLUTION Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick. Playback of my USB memory stick starts only after a very long wait (around 2 to 3 minutes). Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).
Audio and Telematics QUESTION The CD player sound is poor. 322 ANSWER SOLUTION The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions. The audio equipment settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selecting an ambience. Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters.
Audio and Telematics Settings QUESTION In changing the setting of treble and bass the equalizer setting is deselected. ANSWER SOLUTION The selection of an equalizer setting imposes the balance settings. Modifying one without the other is not possible. Modify the balance or equalizer settings to obtain the desired musical ambience. The selection of a distribution setting imposes the balance settings. Modifying one without the other is not possible.
Audio and Telematics QUESTION 324 ANSWER SOLUTION Check that the audio settings (Loudness, Ambience, Treble, Bass, Volume) are adapted to the sources listened to. Adjust Balance, Treble and Bass to the middle position, select the "None" musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode. There is a difference in sound quality between the different audio sources.
Audio and Telematics Telephone QUESTION I cannot connect my Bluetooth telephone. ANSWER SOLUTION The telephone's Bluetooth function may be switched off or the telephone may not be visible. Check that your telephone's Bluetooth function is switched on. Check in the telephone settings that it is "visible to all". The Bluetooth telephone is not compatible with the system. You can check the compatibility of your telephone at www.peugeot.co.uk (services).
Audio and Telematics Audio system / Bluetooth® First steps Steering mounted controls Radio Media Telephone Audio settings Configuration Screen menu map(s) Frequently asked questions Contents 328 329 330 332 336 339 340 341 342 As a safety measure, the driver must only carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the system switches off after activation of energy economy mode. .
Audio and Telematics First steps On / Off, volume adjustment. Select the source: Radio: FM1, FM2, AM, CD, USB, AUX, Streaming. Telephone: accept an incoming call. Telephone, press and hold: end a call, access the calls log for the connected telephone. Adjust audio settings: sound ambience, treble, bass, loudness, distribution, left/right balance, front/ rear balance, automatic volume. 328 Automatic search for a lower radio frequency. Select the previous CD, USB track. Navigation in a list.
Audio and Telematics Steering mounted controls Radio: select the previous / next preset station. CD / USB: select the genre / artist / folder / playlist from the list depending on classification. Select the previous / next item in a menu. Radio: automatic search for a lower frequency. CD / MP3 / USB: select the previous track. CD / USB: press and hold: fast back. Radio: automatic search for a higher frequency. CD / MP3 / USB: select the next track. CD / USB: press and hold: fast forward.
Audio and Telematics Radio Presetting a station Managing a list Press SRC/TEL repeatedly to select the FM1, FM2 or AM waveband. Press LIST to display the list of stations received in alphabetical order. Press and hold one of the buttons to preset the station being listened to. The name of the station is displayed and an audible signal confirms the preset. Select the desired radio station using one of the buttons. Entering a frequency Press on MENU. Select "Radio". Select "Write freq.".
Audio and Telematics RDS Receiving TA messages RDS, if activated, enables you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey. The TA (Traffic Announcement) function gives priority to TA alert messages.
Audio and Telematics Media USB player Press LIST to display the structure of the folders in the compilation. This unit comprises a USB port and a Jack auxiliary socket, depending on model. Select a line in the list. Confirm with "OK". The system constitutes playlists (in temporary memory) the creation time for which can be from a few seconds to several minutes at the first connection. Limiting the number of non-music files and the number of folders reduces this waiting time.
Audio and Telematics Auxiliary socket (AUX) CD player Insert a CD into the player, play starts automatically. Insert an MP3 compilation CD into the CD player. The audio system searches for audio tracks, which can take from a few to several dozen seconds before play starts. Press LIST to display the folder structure of the compilation. Select a line in the list. Confirm with "OK". Connect the portable device (MP3 player...) to the Jack auxiliary socket using an audio cable (not supplied).
Audio and Telematics Information and advice The audio system will only play files with ".mp3", ".wma" and ".wav" on a CD and can play files with ".ogg" extension only on USB. The playlists accepted on CD, MP3, iPod and USB connection are types ".m3u" and ".wpl". The number of files recognised is limited to 5 000 in 500 folders on a maximum of 8 levels. Use only USB memory sticks formatted FAT32 (File Allocation Table). The use of genuine Apple ® USB cables is recommended to ensure correct operation.
Audio and Telematics Bluetooth® audio streaming Streaming allows music files on a telephone to be heard via the vehicle's speakers. Connect the telephone: see the "Telephone" section. In the "Bluetooth: Audio" menu, select the telephone to connect. The audio system connects automatically to a newly paired telephone. Connecting Apple® players Activate the streaming source by pressing the SRC/TEL* button. Control of playback is via the audio system.
Audio and Telematics Telephone Pairing a Bluetooth® telephone For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile telephone with the Bluetooth hands-free system of your audio system must be carried out with the vehicle stationary and the ignition on. Visit www.peugeot.co.uk for more information (compatibility, more help, ...).
Audio and Telematics Managing connections Press the MENU button. Making a call Select or deselect: "Tel.": hands-free connection "Audio": play audio files From the directory Press the MENU button. Select "Bluetooth". Select "BT management" and confirm. The list of paired telephones is displayed. Indicates connection of the audio profile. Indicates connection of the hands-free profile. In the list, select a telephone to pair. "OK" to confirm the choice. Select "Telephone".
Audio and Telematics Making a call Receiving a call Recently called numbers* Press and hold SRC/TEL to display the calls list. Press one of these buttons to go to the previous or next page in the list. An incoming call is announced by a ring and a superimposed display in the screen. Press SRC/TEL. For access to the calls list, it is also possible to press MENU, select "Telephone", then select "Call", and finally select "Calls list".
Audio and Telematics Audio settings Managing calls Hang up In the contextual menu, select "Hang up" to end the call. Combined mode (to leave the vehicle without ending the call) Press ¯ to display the audio settings menu. Press ¯ to go to the next setting. From the contextual menu: Pressing and holding on SRC/TEL also ends the call. Select "Combined mode" to transfer the call to the telephone. Select "Combined mode" to transfer the call to the vehicle.
Audio and Telematics Configuration Display and language settings Press the MENU button. Select "Config.". Select "Displaying" to activate or deactivate scrolling text. Select "Language" to modify the display language. Select "Version" for information on the software. Select "System" when you want to install an update. Information can be obtained from a PEUGEOT dealer. Select "Unit" to modify the units for temperature (Celsius, Fahrenheit).
Audio and Telematics Screen menu map(s) MENU Radio 1 Telephone 1 2 2 2 TA 2 Call RDS Directory 3 TXT Calls list 3 2 3 3 3 3 2 Write freq. 4 Missed calls 3 4 Media Dialed calls 3 1 4 Answered calls 3 2 2 2 Normal 2 Random Bluetooth Random all Repeat 2 2 3 1 2 2 Phone status TA 1 BT management 3 3 Search 2 Config.
Audio and Telematics Frequently asked questions The following tables contain answers to the most frequently asked questions. QUESTION 342 ANSWER SOLUTION There is a difference in sound quality between the different audio sources (radio, CD...). For optimum sound quality, the audio settings (volume, bass, treble, ambience, loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...).
Audio and Telematics QUESTION ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area. The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.
Audio and Telematics QUESTION The CD is ejected automatically or is not played by the player. ANSWER The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play. The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment. SOLUTION - The CD player sound is poor. 344 Check that the CD is inserted in the player the right way up.
Audio and Telematics QUESTION ANSWER SOLUTION An iPod is not recognised when connecting to the USB port. The iPod is of a generation that is not compatible with the USB connection. The hard disk or device is not recognised when connecting to the USB port. Some hard disks and devices need a power supply greater than is provided by the audio system. Connect the device to the 230 V socket, the 12 V socket or an external power supply.
Audio and Telematics Audio system First steps Steering mounted controls Radio Media Audio settings Screen menu map(s) Frequently asked questions Contents 348 349 350 352 354 355 356 As a safety measure, the driver must only carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the system switches off after activation of economy mode. .
Audio and Telematics First steps On / Off, volume adjustment. Selection of source: FM1, FM2, AM, CD, AUX. Adjust audio settings: sound ambience, treble, bass, loudness, left/right balance, automatic volume. Automatic search for a lower/higher radio frequency. Select the next CD track. Navigation in a list. Press and hold: fast forward or back. 348 Display the list of stations received, the CD/MP3 tracks or folders. Press and hold: update the list of stations received.
Audio and Telematics Steering mounted controls Radio: select the previous / next preset station. Select the previous / next item in a menu. Radio: automatic search for a lower frequency. CD / MP3: select the previous track. CD: press and hold: fast back. Radio: automatic search for a higher frequency. CD / MP3: select the next track. CD: press and hold: fast forward. Volume up. Volume down. Change audio source. Confirm a selection.
Audio and Telematics Radio Presetting a station Managing the list Press the SRC/BAND button repeatedly to select the FM1, FM2 or AM waveband. Press LIST to display the list of stations received, in alphabetical order. Press and hold a button to preset the station being listened to. The name of the station is displayed and an audible signal confirms that it has been preset. Select the desired radio station by pressing one of the buttons. Confirm with OK.
Audio and Telematics Receiving TA messages Select "On" or "Off" to switch RDS on or off. Confirm with OK. The TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffic report is transmitted, the current audio source (Radio, CD, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.
Audio and Telematics Media Display RADIO TEXT Auxiliary socket (AUX) CD player Insert a CD into the player, play starts automatically. Insert an MP3 compilation in the CD player. The audio system searches for audio tracks, which can take from a few to several dozen seconds before play starts. Radio Text is information transmitted by the radio station on the station or on the song being played. Press MENU. Select "Radio". Confirm with OK. Select "INFO TEXT". Confirm with OK.
Audio and Telematics Playing a compilation Press LIST to display the folder structure for the compilation. Select a line in the list. Confirm with "OK". Jump a page. Select a folder / Playlist. Start play of the chosen track. Go up one level. Play mode Go back to the first level to select the track classification: By Folders: all folders containing audio files recognised on the peripheral device, in alphabetical order, ignoring the folder structure. By Playlist: depending on the playlists saved.
Audio and Telematics Audio settings Information and advice The audio system can only play files with ".mp3", ".wma" or ".wav" extensions. It is advisable to restrict file names to 20 characters without using special characters (e.g. " ? ; ù) to avoid any playing or displaying problems. In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select standards ISO 9660 level 1. 2 or Joliet. If the disc is recorded in another format, it may not be played correctly.
Audio and Telematics Screen menu map(s) MENU Radio 1 Displaying 1 2 2 2 Traffic 2 SCROLLING RDS TEXT INFO Unit 1 Media 1 2 2 3 3 3 3 2 Play 2 Celsius Fahrenheit Normal Random Random all Language 1 Repeat TEXT INFO .
Audio and Telematics Frequently asked questions The following tables contain answers to the most frequently asked questions. 356 QUESTION ANSWER SOLUTION There is a difference in sound quality between the different audio sources (radio, CD...). For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambiance, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...).
Audio and Telematics QUESTION ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Switch on the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area. The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.
Audio and Telematics QUESTION The CD is ejected automatically or is not played by the player. ANSWER The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play. The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment. SOLUTION - The CD player sound is poor. 358 Check that the CD is inserted in the player the right way up.
Alphabetical index A Accessories...........................................134, 231 Active City Brake............................................145 AdBlue ®............................................24, 175, 180 Adjusting headlamps.....................................124 Adjusting head restraints.................................57 Adjusting seats.................................................56 Adjusting the air distribution......................66, 69 Adjusting the air flow............................
Alphabetical index F Deadlocking.....................................................44 Demisting/defrosting........................................70 Dials and gauges....................................... 14, 15 Dimensions....................................................252 Dipstick..................................................... 31, 237 Direction indicators............... 122, 135, 203, 206 Display screen, instrument panel.............. 14, 15 Door pockets.......................................
Alphabetical index Input, auxiliary......................... 73, 286, 333, 352 Instrument panels...................................... 14, 15 Instrument panel screen................14, 15, 38, 99 Internet browser.............................................299 Isofix mountings.............................................165 J Jack................................................................194 Jukebox..........................................................289 Jump starting............................
Alphabetical index P Pads, brake.................................................... 241 Paint colour code...........................................253 Panoramic glass sunroof...............................133 Park Assist..................................................... 113 Parking brake...........................................82, 241 Parking lamps................................................122 Parking sensors, front.................................... 111 Parking sensors, rear..................
Alphabetical index T Table of weights.....................................245, 249 Tables of engines...................................243, 247 Tables of fuses...............................................208 Tank, fuel................................................ 170, 172 Technical data........................................ 243-249 Telephone..............................................310, 336 Temperature, coolant.......................................33 Third brake lamp............................
Labels are applied at various points on your vehicle. They carry safety warnings as well as vehicle identification information. Do not remove them: they form an integral part of your vehicle. Reproduction or translation of all or part of this document is prohibited without written authorisation from Automobiles PEUGEOT.
Anglais www.peugeot.com AN. 16288.
Monitoring Warning / indicator lamp State Cause Action / Observations fixed with the needle in the red zone. There remains approximately 5 litres of fuel in the tank. At this point, you begin to use the fuel reserve. flashing with the needle in the red zone. There remains very little fuel in the tank. Refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a sufficient addition of fuel is made.
Practical information Fuel tank Fuel tank capacity: approximately 50 litres (45 litres for the BlueHDi Diesel engine). Low fuel level Refuelling When the low fuel level is reached this warning lamp comes on in the instrument panel. There remains approximately 5 litres of fuel in the tank. When the warning lamp flashes, there is very little fuel left. You must refuel as soon as possible to avoid running out of fuel.
Practical information Fuel supply cut-off When you have filled the tank: put the cap back in place, turn the key to the right, then remove it from the cap, close the flap. Your vehicle is fitted with a safety system that cuts off the supply of fuel in the event of an impact. If you have put in the wrong fuel for the engine of your vehicle, you must have the fuel tank drained and filled with the correct fuel before starting the engine.
Monitoring Warning / indicator lamp State Cause Action / Observations fixed with the needle in the red zone. There remains approximately 5 litres of fuel in the tank. At this point, you begin to use the fuel reserve. flashing with the needle in the red zone. There remains very little fuel in the tank. Refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a sufficient addition of fuel is made.
Monitoring Touch screen It gives access to: menus for adjusting settings for vehicle functions and systems, audio and display configuration menus, audio system and telephone controls and the display of associated information. And, depending on equipment, it allows: the display of alert messages and the visual parking sensors information, access to the controls for the navigation system and Internet services, and the display of associated information.
Monitoring 1 1. Volume / mute. See the "Audio equipment and telematics" section. Menus Press this button for access to the different menus. Navigation Depending on trim level, navigation may be unavailable, an option or standard. See the "Audio equipment and telematics" section. Radio Media See the "Audio equipment and telematics" section. Settings Allows configuration of the display and the system. Gives access to interactive help for the vehicle's main systems and warning / indicator lamps.
Practical information Fuel tank Fuel tank capacity: approximately 50 litres (45 litres for the BlueHDi Diesel engine). Low fuel level Refuelling When the low fuel level is reached, this warning lamp comes on in the instrument panel. There remains approximately 5 litres of fuel in the tank. When the warning lamp flashes, there is very little fuel left. You must refuel as soon as possible to avoid running out of fuel.
Practical information Fuel supply cut-off When you have filled the tank: put the cap back in place, turn the key to the right, then remove it from the cap, close the flap. Your vehicle is fitted with a safety system that cuts off the supply of fuel in the event of an impact. If you have put in the wrong fuel for the engine of your vehicle, you must have the fuel tank drained and filled with the correct fuel before starting the engine.
Practical information Compatibility of fuels Fuel used for petrol engines The petrol engines are compatible with biofuels that conform to current and future European standards and which can be obtained from filling stations. Petrol that meets the EN228 standard, mixed with a biofuel meeting the EN15376 standard. The only petrol additives authorised for use are those that meet the B715001 standard.
Technical data Identification markings Various visible markings for the identification of your vehicle. It bears the following information: the tyre inflation pressures with and without load, the tyre sizes, the inflation pressure of the spare wheel, the paint colour code. The original tyres fitted to the vehicle may have a load index or speed rating higher than those given on the label; this has no effect on the inflation pressures. A. Vehicle Identification Number (VIN) under the bonnet.
Audio and Telematics Emergency or assistance call Type 1 PEUGEOT Connect SOS In an emergency, press this button for more than 2 seconds. Flashing of the green indicator lamp and a voice message confirm that the call has been made to the "PEUGEOT Connect SOS"* centre. Pressing this button again immediately cancels the request. The green indicator lamp goes off. The green indicator lamp remains on (without flashing) when communication is established. It goes off at the end of the call.
Audio and Telematics PEUGEOT Connect Assistance Operation of the system When the ignition is switched on, the green indicator lamp comes on for 3 seconds indicating that the system is operating correctly. If the orange indicator lamp flashes then goes off: the system has a fault. If the orange indicator lamp is on fixed: replace the back-up battery. In both cases, the emergency and assistance calls service may not work. Contact a qualified repairer as soon as possible.
Audio and Telematics Emergency or assistance call Type 2 PEUGEOT Connect SOS In an emergency, press this button for more than 2 seconds. Flashing of the green indicator lamp and a voice message confirm that the call has been made to the "PEUGEOT Connect SOS" call centre*. Pressing this button again immediately cancels the request. The green indicator lamp goes off. The green indicator lamp remains on (without flashing) when communication is established. It goes off at the end of the call.
Audio and Telematics PEUGEOT Connect Assistance Operation of the system When the ignition is switched on, the green indicator lamp comes on for 3 seconds indicating that the system is operating correctly. For all countries except Russia, Belarus and Kazakhstan. If the red indicator lamp flashes then goes off: the system has a fault. If the red indicator lamp is on fixed: replace the back-up battery. For Russia, Belarus and Kazakhstan.
Audio and Telematics 7-inch touch screen GPS satellite navigation - Multimedia audio - Bluetooth® telephone Contents First steps 14 Steering mounted controls 16 Menus 17 Navigation 18 Navigation - Guidance 26 30 Traffic Radio Media 32 Radio 38 DAB (Digital Audio Broadcasting) radio 40 42 Media Settings 46 Connected services 54 54 MirrorLinkTM CarPlay ® 58 Telephone 60 Frequently asked questions 68 The system is protected in such a way that it will only operate in your vehicle.
Audio and Telematics First steps Use the buttons to the left of the touch screen for access to the menu carousels, then press the virtual buttons in the touch screen. Each menu is displayed in one or two pages (primary page and secondary page). In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of 5 minutes.
Audio and Telematics Short-cuts: using the touch buttons in the upper band of the touch screen, it is possible to go directly to the selection of audio source, the list of stations (or titles, depending on the source). In very hot conditions, the volume may be limited to protect the system. The return to normal takes place when the temperature in the passenger compartment drops. Press on Menu to display the menu carrousel. Selection of audio source (depending on version): FM / DAB* / AM stations*.
Audio and Telematics Steering mounted controls Press: mute on / off. Increase volume. Decrease volume. Change audio source: radio, media. 16 Radio, rotate: automatic search for the previous / next station. Radio, press: preset stations. Media, rotate: previous / next track. Press: confirm a selection. Telephone: start or answer a call. Call in progress: telephone menu (end call, secret mode, hands-free mode).
Audio and Telematics Menus Navigation Radio Media Settings (Depending on equipment) Enter navigation settings and choose a destination. Connected services Select an audio source, a radio station, display photographs. Telephone Adjust the settings for sound (balance, ambience, etc.) and the display (language, units, date, time, etc.). Driving (Depending on equipment) Operate certain applications on your smartphone via MirrorLinkTM or CarPlay ®. Connect a telephone by Bluetooth ®.
Audio and Telematics Navigation Level 1 Level 2 Navigation 18 Level 3 Route settings
Audio and Telematics Level 1 Level 2 Level 3 Enter destination Comments Display recent destinations Fastest Shortest Time/distance Ecological Tolls Route settings Choose the navigation criteria. The map displays the route chosen according to these criteria. Ferries Navigation Traffic Strict-Close Settings Navigation Show route on map Display the map and start navigation. Confirm Save the options. Save current location Save the current address.
Audio and Telematics Level 1 Level 2 Level 3 Address Enter destination Navigation For managing contacts and their addresses, refer to the "Telephone" section. Contacts To use the telephone functions, refer to the "Telephone" section.
Audio and Telematics Level 1 Level 2 Level 3 Comments Current loc. Point of interest Address settings Town center Address Save Save the current address. Add waypoint Add a waypoint to the route. Navigate to Press to calculate the route. Addresses Navigation View Secondary page Contacts Enter destination Navigate to Select a contact then calculate the route. Search for contact Call On the map Display the map and zoom to view the roads.
Audio and Telematics Level 1 Navigation Level 2 Search for a point of interest Point of interest displayed on the map 22 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All POIs Navigation Secondary page Search for POI Motor Dining/hotels Personal Search Navigation List of categories available. After choosing the category, select the points of interest. Save the settings. Select all Delete Choose the display settings for POIs. Secondary page Import POIs Show POIs Confirm Save the options. .
Audio and Telematics Level 1 Level 2 Level 3 Diversion Traffic messages Map settings Map settings Navigation Settings Settings Settings 24 Moving between the two menus.
Audio and Telematics Level 1 Level 2 Level 3 Comments On the route Navigation Around vehicle Settings for the choice of messages and the filter radius. Near destination Secondary page Detour over a distance Traffic messages Detour Recalculate route Finish Save your selections. Flat view north direction Orientation Flat view vehicle direction Perspective view Navigation Choose the display and orientation of the map.
Audio and Telematics Navigation - Guidance Choosing a new destination Towards a new destination Press on Navigation to display the primary page. Select "Save" to save the address entered as a contact entry. The system allows up to 200 entries. Press on the secondary page. To delete navigation information, press on "Settings". Press on "Stop navigation". Select "Navigate to". Select "Enter destination". To resume navigation press on "Settings".
Audio and Telematics Towards a recent destination Press on Navigation to display the primary page. Press on the secondary page. Towards a contact To be able to use navigation "towards a contact in the directory", it is first necessary to enter the address for your contact. Select a destination from the contacts in the list offered. Select "Navigate to". Select "Enter destination". Press on Navigation to display the primary page. Press on the secondary page. Select an address from the list offered.
Audio and Telematics Towards GPS coordinates Towards a point on the map Towards points of interest (POI) Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Press on Navigation to display the primary page. Select "Enter destination". Select "Enter destination". Press on the secondary page. Select "Address". Select "On the map". Select "Search for POI".
Audio and Telematics An annual mapping update allows new points of interest to be presented to you. You can also update the Risk areas / Danger zones every month. The detailed procedure is available on: http://peugeot.navigation.com. .
Audio and Telematics Traffic Traffic information Risk areas / Danger zone alert settings Press on Navigation to display the primary page. Press on the secondary page. Display of messages This series of alerts and displays is only available if Risk areas have first been downloaded and installed on the system. Press on Navigation to display the primary page. Press on the secondary page. Select "Traffic messages". Select "Settings". Select "Alarm!" (Alert).
Audio and Telematics Setting filters Select the message from the list offered. Receiving TA messages Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Select "Settings". Select "Traffic options". Select "Voice". Select the magnifying glass to have voice information.
Audio and Telematics Radio Media Level 1 Level 2 List of FM stations Save 32
Audio and Telematics Level 1 Level 2 Comments Radio Media List of FM stations Press on a radio station to select it. List FM Radio DAB Radio AM Radio USB Radio Media CD Select the change of source. Source MirrorLinkTM CarPlay ® iPod Bluetooth AUX Radio Media Press on an empty location then on Save. Save .
Audio and Telematics Level 1 Level 2 List of FM stations Media 34 Photos Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Save Press a radio station to select it. Update list Update the list of stations received. Frequency Enter the desired radio frequency. Confirm Save the settings. Home screen Display the selected photo in the home page. Rotate Rotate the photo 90°. Select all Select all the photos in the list. Press again to deselect. Radio Media Secondary page Radio list Radio Media Secondary page Photos Previous photo. Slideshow Pause / Play.
Audio and Telematics Level 1 Level 2 Level 3 Media Settings Settings Settings 36
Audio and Telematics Level 1 Level 2 Level 3 Comments Radio Media Secondary page Presentation of the last media used. Media list Shuffle (all tracks) Media Shuffle (current album) Choose the play settings. Settings Repeat Aux. amplification RDS options Radio Media Secondary page Radio Settings DAB/FM station tracking Display Radio Text Activate or deactivate the settings.
Audio and Telematics Radio Selecting a station Press on Radio Media to display the primary page. Changing a radio frequency Press on Radio Media to display the primary page. Select "Save". Select "List" in the primary page. Select a preset radio station in the list. Or If necessary, select the change of source. Press on Radio Media to display the primary page. Select "FM Radio". Press on the secondary page.
Audio and Telematics Presetting a station OR Select a radio station or frequency (refer to the corresponding section). Press on Radio Media to display the primary page. Press on "Save" (preset). Activating / Deactivating RDS Press on Radio Media to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Press on Frequency. Select a number in the list to preset the previously chosen radio station. A long press on a number saves (presets) the station.
Audio and Telematics DAB (Digital Audio Broadcasting) radio Display of the name of the current station. Short-cut: access to the choice of audio source and the list of stations (or titles, depending on the source). Select the radio station. Any thumbnail broadcast by the station. Select the audio source. Display the "DAB" band. Secondary page. Display of "Radiotext" for the current station. Next "Multiplex". Next radio station. Previous "Multiplex". Previous radio station.
Audio and Telematics Digital radio Digital radio provides higher quality reception and also the graphical display of current information on the radio station being listened to. Select "List" in the primary page. The range of multiplexes available is displayed in alphabetical order. DAB / FM auto tracking "DAB" does not cover 100% of the territory.
Audio and Telematics Media USB port Auxiliary socket (AUX) Selecting the source Press on Radio Media to display the primary page. Select the change of source. Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied). To protect the system, do not use a USB hub. This source is only available if the "Auxiliary socket" option has been activated in the "Media" settings. Connect the portable device (MP3 player, etc.
Audio and Telematics Information and advice The audio system will only play audio files with" .wma, .aac, .flac, .ogg and .mp3" file extensions and with a bit rate of between 32 Kbps and 320 Kbps. It also supports VBR (Variable Bit Rate) mode. No other type of file (.mp4, etc.) can be played. ".wma" files must be of the standard wma 9 type. The sampling rates supported are 32, 44 and 48 KHz. It is advisable to restrict file names to 20 characters, without using of special characters (e.g.
Audio and Telematics Bluetooth® audio streaming Connecting Apple® players Streaming allows audio files on your telephone to be played through the vehicle's speakers. Connect the telephone: see the "Telephone" section, then "Bluetooth". Choose the "Audio" or "All" profile. If play does not start automatically, it may be necessary to start the audio playback from the telephone. Control is from the peripheral device or by using the audio system buttons.
Audio and Telematics Settings Level 1 Level 2 Audio settings Audio settings Audio settings 46
Audio and Telematics Level 1 Settings Audio settings Settings Turn off screen Level 2 Comments Ambience Choose the sound ambience. Balance Sound distribution using the Arkamys ® system. Sound effects Set the volume or activate the link to vehicle speed. Ringtones Set the telephone ringtone and volume. Voice Set the volume and voice for speaking street names. Confirm Save your settings. Function that turns off the display. Pressing the screen reactivates it. .
Audio and Telematics Level 1 Level 2 Units Factory settings Configuration Adjust date and time Display screen 48
Audio and Telematics Level 1 Level 2 Comments Units Set the units used to display distance, fuel consumption and temperature. Delete data Select the desired data in the list then press Delete. Factory settings Return to factory settings. Confirm Save the settings. Confirm Set the date and time then confirm.
Audio and Telematics Level 1 Level 2 Choice of language Configuration Calculator Calendar 50
Audio and Telematics Level 1 Level 2 Comments Settings Secondary page Confirm Select the language then confirm. Languages Settings Secondary page Select the calculator. Calculator Settings Secondary page Select the calendar. Calendar .
Audio and Telematics Audio settings Press on Settings to display the primary page. Select "Audio settings". Select "Ambience" Or "Balance" Or The distribution (or spatialisation using the Arkamys ® system) of sound is an audio process that allows the audio quality to be adapted to the number of passengers in the vehicle. Available only with the 6-speaker configuration. The audio settings (Ambience, Bass:, Treble: and Loudness) are different and independent for each sound source.
Audio and Telematics Modifying system settings Press on Settings to display the primary page. Press on Settings to display the primary page. Press on Settings to display the primary page. Press on the secondary page. Press on the secondary page. Press on the secondary page Select "System Settings". Select "Screen settings". Select "Time/Date" to change the time zone, synchronisation with GPS, the time and its format, then the date.
Audio and Telematics Connected services MirrorLinkTM Optional depending on the smartphone and operating system.
Audio and Telematics MirrorLinkTM smartphone connection As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the MirrorLinkTM technology to be displayed in the vehicle's screen. The principles and standards are constantly evolving.
Audio and Telematics Level 1 56 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Access or return to the applications already downloaded to your smartphone and adapted to MirrorLinkTM technology. Connected services MirrorLinkTM Access to a menu list depending on the application chosen. "Back": abandon the current operation, go up one level. "Home": access or return to the "Car mode" page. Access to the "Connected services" primary page. .
Audio and Telematics CarPlay® 58
Audio and Telematics CarPlay® smartphone connection Connect a USB cable. The smartphone charges when connected by a USB cable. As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the CarPlay ® technology to be displayed on the vehicle's screen.
Audio and Telematics Telephone Level 1 Level 2 Call log Contacts 60 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All calls Incoming calls Outgoing calls Telephone After making choices, start the call. Contacts Call log View Magnifying glass Create Call Addresses Create Modify Delete View Telephone Delete all Contacts By name After making choices, start the call. Confirm Navigate to Search for contact Call .
Audio and Telematics Level 1 Level 2 Bluetooth (devices) Telephone connection Devices detected Telephone Options 62 Level 3
Audio and Telematics Level 1 Telephone connection Level 2 Level 3 Search Connect/Disconnect Start or stop the Bluetooth ® connection to the selected peripheral device. Update Import the contacts from the selected telephone to store them in the audio system. Delete Delete the selected telephone. Confirm Save the settings.
Audio and Telematics Pairing a Bluetooth® telephone For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth ® mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Procedure (short) from the telephone Procedure from the system Activate the telephone's Bluetooth ® function and ensure that it is "visible to all" (telephone configuration).
Audio and Telematics Connecting a Bluetooth® peripheral device Automatic reconnection The services available depend on the network, the SIM card and the compatibility of the Bluetooth ® telephone used. Check the telephone manual and with your network provider for details of the services available to you. Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts. If not, select "Update".
Audio and Telematics Managing paired telephones This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing. Receiving a call An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on the steering mounted TEL button to accept an incoming call. Press on Telephone to display the primary page. Make a long press Press on the secondary page. on the steering mounted TEL button to reject the call.
Audio and Telematics Managing contacts / entries Select "Contacts". Press on Telephone to display the primary page. Select "By name" to view the list of contacts. Select "Contacts". Select the desired contact from the list offered. Select "Call". Select "View". Calling a recently used number Select "Create" to add a new contact, observing the "international format". Press on Telephone to display the primary page. Or "Modify" to edit the selected contact. Select "Call log".
Audio and Telematics Frequently asked questions The following table groups together the answers to the most frequently asked questions concerning your audio system. Navigation QUESTION 68 ANSWER SOLUTION The route calculation is not successful. The route settings may conflict with the current location (exclusion of Check the route settings in the "Navigation" toll roads on a toll motorway). menu. The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
Audio and Telematics QUESTION Certain traffic jams along the route are not indicated in real time. ANSWER SOLUTION On starting, it is several minutes before the system begins to receive Wait until the traffic information is being received the traffic information. correctly (display of the traffic information icons on the map). The filters are too restrictive. Modify the settings. In certain countries, only major routes (e.g. motorways) are listed for This phenomenon is normal.
Audio and Telematics Radio QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed, etc.). I cannot find some radio stations in the list of stations received. The name of the radio station changes. 70 ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
Audio and Telematics Media QUESTION ANSWER SOLUTION Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick. Playback of my USB memory stick starts only after a very long wait (around 2 to 3 minutes). Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).
Audio and Telematics QUESTION The CD player sound is poor. 72 ANSWER SOLUTION The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions. The audio system settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selecting an ambience. Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters.
Audio and Telematics Settings QUESTION When changing the settings for treble and bass, the ambience is deselected. ANSWER SOLUTION The selection of an ambience imposes the settings for treble and bass. Modifying one without the other is not possible. Modify the settings for treble and bass or then ambience setting to obtain the desired sound environment. The selection of a distribution setting imposes the balance settings. Modifying one without the other is not possible.
Audio and Telematics QUESTION 74 ANSWER SOLUTION Check that the audio settings (Loudness, Ambience, Treble, Bass, Volume) are adapted to the sources listened to. Adjust Balance, Treble and Bass to the middle position, select the "None" musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode. There is a difference in sound quality between the different audio sources.
Audio and Telematics Telephone QUESTION I cannot connect my Bluetooth telephone. ANSWER SOLUTION The telephone's Bluetooth function may be switched off or the telephone may not be visible. Check that your telephone's Bluetooth function is switched on. Check in the telephone settings that it is "visible to all". The Bluetooth telephone is not compatible with the system. You can check the compatibility of your telephone at www.peugeot.co.uk (services).
Audio and Telematics 76
