Operation Manual

2
i
COMFORT
63
 Engage the shafts of the windstop
frame in the openings in the rear
side trim.
When installing the windstop for the
fi rst time:
 position a 10 mm open-ended span-
ner on the hexagonal part of the
shaft,
 tighten or slacken without forcing on
each side to adjust the depth set-
ting.
 Lastly, always check that the wind-
stop is retained securely before us-
ing it in the "cabriolet" confi guration.
Removal
 Press and pull on the shaft supports
to release the shafts from the open-
ings in the rear side trim.
It is not necessary to remove the
windstop when changing to the
"coupé" confi guration.