Operation Manual

130
Ease of use and comfort
3008-2_en_Chap03_ergonomie-et-confort_ed01-2016
Rear seats
Rear head restraints
Bench seat with a fixed cushion and split folding backrests (2/3-1/3) to adapt the boot load space.
They have two positions:
- a high position, for when the seat is in
use:
F pull the head restraint fully up.
- a low position, for stowing, when the seat
is not in use:
F press the lug A to release the head
restraint and push it fully down.
The rear head restraints can be removed.
Never drive with passengers seated at
the rear when the head restraints are
removed; they must be in place and in
the high position.
The head restraint for the centre seat
and those for outer seats are not
interchangeable.
To remove a head restraint:
F pull the head restraint as far up as it will go,
F press the lug A to release the head
restraint and remove it completely,
F stow the head restraint.
To refit a head restraint:
F introduce the rods of the head restraint
into the guides of the corresponding seat
backrest,
F push the head restraint down as far as it
will go,
F press the lug A and then push the head
restraint fully down.