Operation Manual

In the event of a breakdown
326
3008-2_en_Chap08_en cas-de-panne_ed01-2016
Changing foglamp bulbs
(on models with halogen
headlamps)
F Introduce a flat screwdriver in the hole in
the finisher.
F Pull and lever to unclip the front bumper
finisher.
F Using a Torx screwdriver, remove the two
module fixing screws.
F Remove the module from its housing.
F Disconnect the bulb holder connector.
F Turn the bulb holder a quarter of a turn and
pull it out.
F Change the assembly.
To refit, carry out these operations in reverse
order.
To replace this type of bulb, you can
also contact a PEUGEOT dealer or a
qualified workshop.