Operation Manual

Fittings
110
Roller load space cover
To install the load space cover:
F position one of the ends of the roller in its
support,
F insert the second end in its support,
F pivot the ends of the roller downwards to
secure it,
F reel out the load space cover to the boot
pillars,
F insert the load space screen guides in the
rails on the boot pillars.
To remove the load space cover:
F remove the load space cover guides from
the rails on the boot pillars,
F reel in the load space cover in its roller,
To store the load space cover, roller uppermost
and flap facing towards the inside of the
vehicle:
F place the right-hand end in its housing,
F slide the left-hand end into the guide then
into its housing,
F pivot the ends of the roller upwards to
release it,
F remove the roller from its support.
F secure the assembly by pivoting the ends
downwards.
The roller has two rings for fixing the
luggage retaining net depending on its
location.
If you use the 3
rd
row seats (7 seat
version), it is essential to store the roller
in its housing.