Operation Manual

5
Fittings
111
High load retaining
net*
To use it in row 1:
F fold the rear seats,
F open the covers of the upper fixings 1,
F unroll the high load retaining net,
F position one of the ends of the net's metal
bar in the corresponding upper fixing 1,
then do the same with the other end,
F slacken the straps fully,
F fix the snap hook of each of the straps
on the corresponding Top Tether ring 3
(located on the back of the folded rear side
seats),
F tighten the straps,
F check that the net is hooked and tightened
correctly.
To use it in row 2:
F roll up or remove the load space screen,
F open the covers of the upper fixings 2,
F unroll the high load retaining net,
F position one of the ends of the net's metal
bar in the corresponding upper fixing 2,
then do the same with the other end,
F fix the snap hook of each of the straps in
the corresponding stowing ring 4,
F tighten the straps,
F check that the net is hooked and tightened
correctly.
Hooked onto the special upper and lower
fixings, this permits use of the entire loading
volume up to the roof:
- behind the front seats (row 1) when the
rear seats are folded.
- behind the rear seats (row 2).
* If your vehicle is equipped with this.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.