Operation Manual

Child safety
126
a: universal child seat, child seat that can be
installed in all vehicles using a seat belt.
b: group 0, from birth to 10 kg. Shells seats and
baby carriers cannot be installed in the front
passenger seat.
c: consult the legislation in force in your
country before installing your child on
this seat.
d: To install a child seat on a rear seat,
rearward facing or forward facing, move
the front seat forward, then straighten the
backrest to allow enough space for the child
seat and the child's legs.
e: To install a child seat on a rear seat,
rearward facing or forward facing, adjust the
rear seat to the fully back position, with the
backrest upright.
Remove and stow the head restraint
before installing a child seat on a
passenger seat. Refit the head restraint
once the child seat has been removed.
U: seat suitable for the installation of a
child seat secured using a seat belt and
universally approved, rearward facing and/or
forward facing.
U (R): same as U, with the vehicle's seat
adjusted to the highest position.
L-: only the child seats indicated can be
installed on the seat concerned (according
to local legislation).
X: seat position not suitable for installation of a
child seat for the weight class indicated.