Operation Manual

10
Practical information
221
F Switch on the compressor by tilting the
switch A to position "1" until the tyre
pressure reaches 2.0 bars.
F Remove the compressor and store the
bottle in the plastic bag, supplied in the kit,
to avoid staining your vehicle with traces of
fluid.
F Drive immediately for approximately
two miles (three kilometres), at reduced
speed (between 10 and 35 mph [20 and
60 km/h]), to plug the puncture.
F Stop to check the repair and the pressure.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle and leave the engine
running.