Operation Manual

10
Practical information
227
Do not use:
- the jack for any purpose other than
lifting the vehicle,
- a jack other than the one supplied
by the manufacturer.
F Extend the jack until its head comes into
contact with the jacking point A or B; the
contact area A or B must be correctly
engaged with the middle of the head of the
jack.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
might slip or drop - Risk of injury!
Position the jack only at a jacking
point A or B under the vehicle, ensuring
that the contact area on the vehicle
is correctly centred on the head of
the jack. Otherwise there is a risk of
damage to the vehicle and/or the jack
dropping - Risk of injury!
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.