Operation Manual

3
Comfor t
75
Rigid panel
Each 2
nd
row seat backrest has a rigid panel
attached.
This panel enables you to:
- have a continuous load surface in the boot,
whatever the positions of the seats,
- avoid having objects sliding under the
2
nd
row seats. 30 kg maximum on each
panel.
Releasing / Securing the rigid
panel
F Before deploying the rigid panels, check
that the 2
nd
row seats are positioned as far
towards the rear as possible.
F Slide the latch E on the panel upwards, to
release it.
F Return the panel to its initial position, then
slide the latch E downwards, to secure it.
Entering / Exiting the 3
rd
row
(7 seat version)
Repositioning the seat,
from the outside, with the
door open
If there are passengers seated in the 3
rd
row
(7 seat version):
F Manually return the assembly as far as
possible rearwards; the seat does not
return as far as the maximum rearwards
position so as to retain leg space for the
3
rd
row passengers.
F Fold the seat base.
F Raise the aircraft style table on the 2
nd
row
seat if it is down.
F Hold the control F in the raised position,
the seat unlocks and the seat base comes
up against the backrest.
F Push the seat backrest forwards, holding
the control F forwards.