Operation Manual

3
Comfor t
77
Storing a seat
F Lower the head restraints.
F Correctly position the concertina board
vertically behind the seat.
F Pull on the control H, located at the bottom
of the seat backrest. The seat is released.
F Next push the backrest gently forwards.
The backrest pivots folding onto the seat
base. The seat base then folds into the
stowage area provided for that purpose.
F Reposition the concertina boards over the
folded seats.
Before moving the 3
rd
row seats, return
the rigid panels of the 2
nd
row seats to
the upright position and lock them in
place.
Do not try to fold a 3
rd
row seat that has
not first had the backrest fully locked in
place.
Do not leave objects either on or
underneath the seat bases of the
3
rd
row seats when you are folding them.
Do not leave your hand on the control H
as you fold the seats, as you risk
trapping your fingers.
Rear head restraints
The rear head restraints can be removed and
have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it upwards.
To lower it, press the lug then the head
restraint.
To remove it, place it in the high position, push
the lug and pull it upwards.
To refit it, engage the head restraint rods in the
holes taking care to remain in line with the seat
back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.