Operating Manual

ManualsBrandspewag austria ManualsElectronicsWireless Charger

pewag levo link LL

Original operating manual

for pewag levo link LL

Please read the operating manual

carefully prior to using this product. If

you have any questions, please contact

your supplier.

We are always grateful for comments

or suggestions as to how we could improve the

content of our operating manuals. As a

result of our ongoing research and development efforts, the

pewag group reserves the right to perform technical changes

and/or changes of external characteristics of our lifting devices.

This operating manual must be made available to users until the

lifting device is removed from service. This operating manual is

subject to an ongoing improvement process and is therefore only

valid in its most recent version. The most recent version of this

operating manual is available at www.pewag.com.

Content

1. General information

2. Description of functions

3. Safety instructions

3.1 General information

3.2 Battery

3.3 Charging station and multi-adapter

4. Designated use and technical data

4.1 pewag levo link LL

4.2 Battery

4.3 Charging station and multi-adapter

4.4 Labelling and identification

4.5 Restrictions on use

4.6 Foreseeable misuse

4.7 Warnings and protective measures to be taken by the

user

5. First use and operation

5.1 Battery installation

5.2 First use

5.3 Operating the levo remote standard radio control

5.4 Connecting the pewag levo clamp LC with the radio control

unit

5.5 pewag levo clamp LC network

5.6 Disconnecting the pewag levo clamp LC from the radio

control unit

5.7 Charging station

5.8 peTAG

6. Additional equipment and accessories

6.1 Light module

6.2 Multi-adapter and end piece

6.3 pewag levo manager

6.4 levo manager USB dongle

6.5 pewag levo data logger

7. Attaching and lifting the load

7.1 Attachment to the crane hook

7.2 Lifting and lowering the load

8. Procedure in case of accidents or faults

9. Cleaning, maintenance, regular inspections

9.1 Cleaning

9.2 Maintenance & repair

9.3 Exchanging the battery unit

9.4 Exchanging the battery of the levo remote radio

control unit

9.5 Exchanging the fuse of the multi-adapter

9.6 Regular inspections and repairs

10. Warranty

10.1 Terms and conditions

11. Storage

12. Removal from service

13. Declaration of conformity

14. Appendix

Summary of content (8 pages)

PAGE 1
Original operating manual for pewag levo link LL Please read the operating manual carefully prior to using this product. If you have any questions, please contact your supplier. We are always grateful for comments or suggestions as to how we could improve the content of our operating manuals. As a result of our ongoing research and development efforts, the pewag group reserves the right to perform technical changes and/or changes of external characteristics of our lifting devices.
PAGE 2
Code Load capacity [kg] LL 7 d [mm] 7.600 23 t w s [mm] [mm] [mm] Weight approx. [kg] 160 90 17 2 EN Code Load capacity [lbs] LL 7 16.700 d t w s [mm] [mm] [mm] [mm] Weight approx. [lbs] 0,91 6,30 3,54 0,67 4,41 The highlighted sections in this operating manual contain information on areas with a particularly high risk potential. Disregarding this information may cause serious injuries or death. Please pay particular attention to these sections. 1.
PAGE 3
. Safety instructions EN Always bear in mind your own safety and that of others! Read this operating manual carefully before operating the pewag levo link LL. Please ensure that you have fully read and understood this operating manual before using the system. A damaged lifting device or improper use may cause accidents that lead to severe injuries and/or death! Damaged lifting equipment (see maintenance instructions) may fail even during normal conditions of use. Such lifting equipment may not be used.
PAGE 4
3.3 Charging unit EN The following safety instructions refer to the charging unit. • Use only the supplied pewag power unit. • The connector plug must fit in the socket. The plug must not be modified in any way. • Do not use the cable for purposes other than its designated use, for instance to carry the charging unit or to remove the plug from the socket. Keep the cable away from heat, oil and sharp edges. • Do not use the charging unit in the open air.
PAGE 5
• Continued use despite visible damage or modifications of the device 4.5 Restrictions on use EN Under certain conditions, the use of the pewag link LL is restricted (see table below). The table below describes certain loads with their corresponding reduction factors. Safe working load values can be calculated by multiplying the working load limit with the reduction factor defined in the table.
PAGE 6
records certain data via an interface and stores it in a storage medium. The following data will be saved:  Temperature/Weight during the operation  Errors on the pewag levo device Further information can be found in the pewag levo manager handbook. 2. Insert the pewag levo link LL into the charging unit. Take care that the link is oriented correctly (symbol on charging unit and pewag levo link LL). 6. Attaching and lifting the load 3.
PAGE 7
The pewag levo link LL must be checked for visible damage and/or dirt prior to each use. The following faults may be rectified by a competent person in accordance with this manual:  Cleaning in case of heavy soiling  Damaged, missing or illegible identification plate users a 1-year warranty for their product. This warranty is valid worldwide. The warranty does not affect statutory warranty rights (liability for defects). This warranty is subject to the following warranty conditions (10.
PAGE 8
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. environmentally friendly manner. 13.