Installation Guide

INSTRUCTIONS/INSTRUCCIONES
Keep Out of Reach of Children
Mantener Fuera del Alcance de los Niños
Model # PF0931-CH
www.pfwaterworks.com
[e-mail]
1.877.265.9777
Made in China
PATENT PENDING
TubSTRAIN
Threaded Cap
Easily replace
to upgrade or
change finish.
1
2
TubSTRAIN Universal Tub Hair Catcher/Strainer is the perfect way to
prevent nasty hair clogs. It is guaranteed to catch every single hair each
time you take a shower.
• Universal – Retrofits in any standard tub drain - 1-1/2” or 1-1/4”
• Drop in Design – Easy to Clean and Maintain
• Threaded Cap – Easy to replace Upgrade Finishes
• Easy, No Tools Install in Existing or New Bathtub Drains
• Finishes – No Compromise, Finish Options Available
Remove and discard existing bathtub stopper or grid plate
from tub drain.
TubSTRAIN Hair Catcher Easily Catches
Human and Pet Hair and Eliminates the
Nasty Clogs in almost All Tub Drains.
Jumbo Cap Easily Covers-Up Ugly/Worn
Drain Flange
Just Insert TubSTRAIN Hair Catcher in the drain shoe.
Replace Gasket with thin O-Ring for 1-1/4” Tub Drain.
WARNING: This product may result in an exposure to Phthalate which is known to the
State of California to cause cancer or birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.”
Every few showers, remove TubSTRAIN Hair Catcher and
wipe off the collected hairs with a tissue or towel.
Hairs wrap around the body and are collected in one place
ready for easy removal. Jumbo Cap covers up the ugly/
worn drain flange.
3
4
Invented and Designed in the USA
Note - If you have a Drain without crossbars.
Replace Gasket with thick O-Ring included.