Installation Guide

Screwless Snap-On Face Plate
Includes:
(1) Screwless Snap-On overflow face plate
(2) 1 Hole or 2 Hole Adapter with screw
Tools Required for Installation: Phillips Screwdriver
1. Remove screws from original face plate.
2. Remove original face plate from tub.
3. Attach the adapter to tub overflow using new screw(s) provided.
4. Snap-on the Screwless Face Plate to the Adapter
Care Instructions:
To clean, wipe with a soft damp cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals
as these may/will damage the finish.