User Guide
Adjustment
12 - 32
Fig. 12 - 31
● Position drive wheel
1
in accordance with
requirement 1
and tighten screw
2
.
● Place a bobbin onto the bobbin winder, thread the bobbin and engage the bobbin winder
● Move regulating pin
3
in accordance with requirement
2
and tighten screw
4
.
12.05.30 Bobbin winder
Requirement
1. With the bobbin winder engaged the bobbin winder spindle must be turned reliably,
but friction wheel
3
must not touch drive wheel
1
when the bobbin winder is
switched off.
2. The bobbin winder must disengage automatically when the thread is approx.
1 mm
from the edge of the bobbin.
4
5
1 mm
2
1
3