User Guide
Adjustment
12 - 33
12
.06 Adjusting the underedge trimmer -771/04
12.06.01 Resting position of the knife
Requirement
When adjustment lever
1
is set at "0", the knife stroke should be as small as possible.
● Unscrew the milled screw of adjustment lever
1
(screw
2
).
● Remove cover
3
(screws
4
).
● Place crank
5
(screws
6
) at right angles to the bed plate, and at the same time set a
distance of
65 mm
between adjustment lever
1
and the bedplate.
● Screw cover
3
(screws
4
) back on.
● Set adjustment lever
1
at "0".
● Remove cover cap
7
and check the lifting motion of the knife by turning the motor
impeller wheel (see requirement).
● Adjust crank
8
(screw
9
) in accordance with the requirement.
Fig. 12 - 32
9
8
7
1
90°
5
6
65 mm
1
2
4
3
4