Operation Manual

Remove
the fabric from the frame
and measure the
length of the pattern.
Halve this
length. This shows
you where
the middle
of
the
pattern
is. Now mark
the middle of the fabric
with
a
dot This
is very
important
because the placing
and moving
of a
pattern in the
embroidery frame
is always based
around the
middle of the pattern.
When you
begin
to sew the machine
skips
back to
the pattern start
automatically.
Now
fit
the
fabric into the frame again
so that
the
line is parallel to the
frame.
Now
position the
needle
exactly over the marking
in the middle
of
the fabric
using
the
v’4
symbols. Using
key 7
ensure
that the pattern
borders on the
previously em broidered
pattern.
Now embroider
the second
pattern. All further
patterns are
to be
embroidered
using the same
procedure.
2
S
E
0,
93
ii