Datasheet
Flashing sequence: 1 Hz = 60 flashes/min / see table
Flashing power: 13 joules
Service life: after 12.000.000 flashes
still 70% light emission
Duty cycle: 100%
Mechanical data: Quadro F12 / Quadro S-M-Flex / Quadro R / Quadro RX
Cable gland 2 x M 20
Clamps 2 x 2 x 2,5 mm
2
(to connect through, not for R/RX)
Weight 600 g
Material globe Polycarbonate PC
Material housing Polycarbonate (PC), RAL 7035 (RAL 3000 optional)
Installation mounting lugs: 113 x 153 mm – M5 or 127,1 x 127,1 mm – M5
inside holes: 113 x 113 mm
PCB made of fibre-glass reinforced epoxy resin for thermic and mechanical protection.
PCB dip-varnished to protect against moisture.
Flash tube fastened with stainless steel clamp to prevent shock and vibration.
Standard:
Operational temperature –25°C…+55°C
Storage temperature –40°C…+70°C
Relative humidity 100%
Protective system IP 66 IP 67 (EN 60529), IK 08, all installations
Protective class II
Flashing light 13joules
Quadro F12
●
industrial successor to the famous Eiffel Tower light
●
design conforms to industrial needs, the mounting can be easially achieved
using either the drilling on the inside or the fixing lugs of the housing
●
mechanical rigidity is superb, with real IP66, IP67 and IK08 these
lights remain a reliable alarm device even under harsh conditions
●
the Quadro’s resistance to outdoor use, during hailstorms or even with high
pressure cleaning systems guarantees it’s safe functioning
●
service life is extremely high: even after 12 million flashes a 70% light emission
is achieved, which is the operating requirement for a safe optical warning for
even the most dangerous machines such as for punching, pressing, edging
Quadro S-M-Flex
●
matured tunnel security light
●
synchronized flashing for up to 10 lights in series. No extra controller is
needed. The initial current is kept below 1 Amp which makes it suitable for
use in SPS-controlled and battery back-up systems
●
variable brightness and adjustable flashing frequency
●
integrated function monitor with fault message contact
Quadro R / Quadro RX
●
for flash illumination for indoor and outdoor projects, even under extreme
ambient conditions
●
R = integrated unmediate sparkling effect
●
X = black enclosure and reflection shield
●
see also page 57
Light intensity (DIN 5037): Quadro F12 / S-M-Flex
clear 160 candela
white 138 cd
yellow 133 cd
amber 95 cd
red 22 cd
green 48 cd
blue 20 cd
Nominal voltage Electrical data Quadro F12 Quadro S-M-Flex Quadro R / RX
Voltage range: 195V...253V 195V...253V 195V...253V
230V Rated current: 160mA 160mA 85mA
Initial current restricted to: < 7A / 150µs <1A / 10 ms
Voltage range: 95V...127V 95V...127V
115V *
Rated current: 340mA 350mA (1 Hz / 13J)
* available on request
Optical data:
AC DC
Electrical data: 50Hz/60Hz
Quadro F12 / S-M-Flex
Alarm range Warning range
∅
30m
∅
7, 5 m
IP 66
Protective-
system
Operational
temperature
Relative
humidity
+55°C
–25°C
+70°C
–40°C
Storage
temperature
100%
18
Quadro F12 / Quadro S-M-Flex / Quadro RX
Nominal voltage Electrical data Quadro F12
Voltage range: 18V...30V
24V Rated current: 700mA
Initial current restricted to: < 5A / 2ms
Flashing sequence: 22-28 flashes/min
Flashing power: 10 joules
Service life: after 10.000.000 flashes
still 70% light emission
Duty cycle: 100%
Quadro R / RX
New!
I
t
lim
Start-up current
limited < 1 Amp
Quadro S-M-Flex
Sync
We reserve the right to technical alterations.Subject to correction
.
075000044
IP 67
Protective-
system
IK 08
Housing high
impact-resistant