SDS

ManualsBrandsPFERD ManualsAbrasive Wheels4-1/2" x .045 Metal Cut-Off Wheel

SAFETY DATA SHEET

Organic Bonded Abrasives, Type 2 (1/13)

SDS #11

1. PRODUCT AND COMPANY IDENTIFICATION

Product Identifier: Organic Bonded Abrasives, Type 2

Covers: Cut-off-wheels EH (flat type), EHT (depressed center type), T, PT; Steel Core Wheels; Reinforced

Grinding Wheels E; Cup Wheels ETT

Identified Uses of the manufactured article and Uses Advised Against: Abrasive materials.

Details of the Supplier of the Safety Data Sheet

Manufacturer: PFERD INC.

9201 W. Heather Ave.

Milwaukee, WI 53224, USA

Internet: www.pferd.com

E-Mail: Jim.Sucharski@pferdusa.com

Information Phone: 262-509-5614

Emergency Telephone Number: 1-800-342-9015 (8.00 a.m. to 4.30 p.m. Eastern Time)

SDS Date of Preparation: May 02, 2014

2. HAZARDS IDENTIFICATION

This product is a black, brown or reddish colored solid wheel with no odour.

EMERGENCY OVERVIEW

Dust may cause eye and respiratory irritation. Dust particles may cause abrasive injury to the eyes.

Other Hazards

A greater hazard, in most cases, is the exposure to the dust/fumes from the material or paint/coatings being

sanded. Most of the dust generated during cutting and grinding is from the base material being sanded and the

potential hazard from this exposure must be evaluated.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous Component

CAS #

Aluminum Oxide

1344-28-1

0-95

and/or Silicon Carbide

409-21-2

0-95

and/or Steel

Mixture

0-40

and Phenol-Formaldehyde resin, cured

9003-35-4

2-30

and/or Zirconium Oxide

1314-23-4

0-25

and/or Potassium Aluminium Fluoride

60304-36-1

0-20

and/or Iron Disulfide

12068-85-8

0-20

and/or Fiberglass weaves

65997-17-3

0-15

and/or Cryolite

13775-53-6; 15096-52-3

0-15

and/or Copper Iron Disulphide

1308-56-1

0-10

and/or Zinc Sulphide

1314-98-3

0-10

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier: Organic Bonded Abrasives, Type 2 Covers: Cut-off-wheels EH (flat type), EHT (depressed center type), T, PT; Steel Core Wheels; Reinforced Grinding Wheels E; Cup Wheels ETT Identified Uses of the manufactured article and Uses Advised Against: Abrasive materials. Details of the Supplier of the Safety Data Sheet Manufacturer: PFERD INC. 9201 W. Heather Ave.
PAGE 2
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 and/or Calcium Carbonate and/or Manganese Dichloride and/or Polyethylene and/or Manganese Carbonate and/or Calcium Fluoride and/or Fleece and/or Adhesive, cured and/or Graphite and/or Paper 471-34-1 7773-01-5 9002-88-4 598-62-9 7789-75-5 Mixture Mixture 7782-42-5 Mixture 0-8 0-7 0-5 0-4 0-4 0-3 0-3 0-2 0-2 4. FIRST AID MEASURES Description of First Aid Measures Ingestion: If sanding dust is swallowed, seek medical attention.
PAGE 3
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 Reference to Other Sections: Refer to Section 8 for personal protective equipment and Section 14 for proper disposal. 7. HANDLING AND STORAGE Precautions for Safe Handling: Use only with adequate ventilation. Avoid breathing dust. Wash thoroughly after handling and use, especially before eating, drinking or smoking. Consider potential exposure to components of the base materials or coatings being sanded or ground.
PAGE 4
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 and/or Calcium Carbonate and/or Manganese Dichloride (as Mn) and/or Polyethylene and/or Manganese Carbonate (as Mn) and/or Calcium Fluoride (as F) and/or Fleece and/or Adhesive, cured Graphite Paper 15 mg/m3 (total dust) 5 mg/m3 (respirable) 5 mg/m3 Ceiling None Established None Established 10 mg/m3 0.2 mg/m3 0.2 mg/m3 5 mg/m3 None Established 5 mg/m3 Ceiling None Established 0.2 mg/m3 None Established 0.
PAGE 5
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 Melting/Freezing Point: Not Applicable Flammable Limits: LEL: Not Applicable Autoignition Temperature: Not Applicable Viscosity: Not Applicable Oxidizing Properties: Not an Oxidizer Molecular Formula: Mixture Molecular Weight: Mixture Flash Point: Non-Combustible UEL: Not Applicable Decomposition Temperature: Not Available Explosive Properties: Not Explosive Relative Density: Not Determined Flammability (solid, gas): Not flammable 10.
PAGE 6
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 Reproductive Toxicity: Product may harm lactation or may be transmitted to the child via lactation. Specific Target Organ Toxicity: Single Exposure: No data available Repeat Exposure: Long-term overexposure to respirable dust may cause lung damage (fibrosis) with symptoms of coughing, shortness of breath and diminished breathing capacity. Chronic effects may be aggravated by smoking.
PAGE 7
SAFETY DATA SHEET Organic Bonded Abrasives, Type 2 (1/13) SDS #11 15.