Installation Guide

ENGLISH

13 TUB SPOUT FUNCTION

When the valve is turned on, water normaly ows through the Tub Spout (13A).

To activate the shower, turn valve on and pull the Knob (13B) up. Hold on until

water ows continiously from the shower arm.

16 SHOWER HEAD INSTALLATION

Thread Shower Head (16A) onto Shower Arm (16B).

Make sure Shower Head (16A) is securely tightened to Shower Arm (16B).

12 VALVE FUNCTION

By rotating the Lever Handle (12A) slightly counterclockwise, the valve will be

fully activated to the “COLD” position. The water temperature can be increased

by continuing to rotate the Lever Handle (12A) in a counterclockwise direction.

14 FINAL FLUSHING

For nal ushing, turn valve on and allow water to run through the Tub Spout

(14A) for several minutes. Pull Spout Knob (14B) up to allow water to run through

Shower Arm (14C). Allow water to run for several minutes untill all foreign mater

clears the line.

15 SHOWER HEAD FUNCTION

To adjust spray, turn Outer Shell (15A) using Switch (15B) to a desired spray

pattern.

12A

13B

16A

FULL

HOT

FULL

COLD

CLOSED

OPEN

For

Shower

13A

16B

15B

15A

14C

14A

14B