Installation Guide
ENGLISH
4DE/B
3
2
FAUCET INSTALLATION
4
5
6
1 BEFORE PROCEEDING
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3 TOOLS RECOMMENDED
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A D Putty Plate
B Lift Rod E Pop-Up Assembly
C Wingnuts (2x)
1-800-Pfaucet (1-800-732-8238).
5 PUTTY PLATE ATTACHMENT
groove in bottom of Putty Plate (5A). Install the Putty Plate over the three holes in
your sink.
6 FAUCET INSTALLATION
6A) through the end holes of the sink. Press Deck Plate (6B)
onto Putty Plate (6C).
<
BOTTOM GROOVE
5A
6A
6A
6B
6C
A
B
C
D
E