Instructions / Assembly

ENGLISH

Thank you for purchasing this Price Pﬁ ster product. All Price Pﬁ ster products are carefully engineered, and factory tested to

provide long trouble-free use under normal conditions. This valve is easy to install using basic tools and our easy to follow

illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price

Pﬁ ster recommends calling a professional if you are uncertain about installing

this product!

This product should be installed in accordance with all local and state plumbing and

building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are

usually found under the sink or near the water meter. If you are replacing an

existing faucet, remove the faucet from the sink and clean the sink surface

thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty • Slotted screwdriver • Pliers

• Adjustable wrench • Flashlight • Cloth

Your installation may require new supply lines and / or shut-off valves or other

additional tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are

included:

A Spout Body B Control Body C Side Spray

D Hose Guide E Gaskets (2X) F Washers (2X)

G Locknuts (2X) H Soap Dispenser J Diverter

K Clip

If any of these items are missing, please contact Price Pﬁ ster Consumer Services

at 1-800-Pfaucet (1-800-732-8238).

5 SPOUT BODY INSTALLATION

Apply plumber’s putty into groove on bottom of Gasket (5A) per manufacturer’s

recommendations. Place Gasket (5A) under base of Spout Body (5B). From above

sink, insert Mounting Shank (5C) through center hole of sink.

6 SECURING SPOUT BODY

From underneath sink, place large Washer (6A), and Locknut (6B) onto Mounting

Shank (6C). Tighten faucet ﬁ rmly to sink.

FAUCET INSTALLATION