Installation Guide

ENGLISH

MAINTENANCE & CARE

FAUCET FUNCTIONS

17 UNIT START UP

Turn on hot and cold water supplies, and check for leaks above and below the sink

18 SPOUT FUNCTION

The Spout (18A) can be rotated around the Faucet Body in any direction.

19 VALVE FUNCTION

By rotating the Lever Handle (19A) away from the Faucet Body (19B), the valve will be

activated allowing water to ﬂ ow. The water ﬂ ow will increase by continuing to rotate the

Lever Handle (19A). By rotating the Lever Handle towards you, the water temperature

will decrease to cold ﬂ ow only. By rotating the Lever Handle away from you, the water

temperature will increased to hot ﬂ ow only.

Note: Flush faucet before turning on valve (see step 24).

20 PULL-OUT OPERATION

The Pull-Out Hose (20A) can be pulled forward to spray water in any direction.

21 SPRAY OPERATION

To activate the spray mode, simply press Toggle Button (21A) located under the spray

head. You can change between spray and stream by pressing the opposite sides of the

Toggle Button (21A/21B) while the faucet is in operation. The water ﬂ ow will increase by

sliding Spray Selector Switch (21C) from side to side (in spray mode only).

Note: The faucet will always turn on in regular stream mode.

22 SOAP DISPENSER OPERATION

To activate Soap Dispenser (22A), press Dispenser Head (22B) to spray liquid soap.

23 SPRAY HEAD REMOVAL

To prevent damage to the internal parts of your faucet from debris that may have collected

in the water lines, it will be necessary to ﬂ ush the faucet. Flushing requires the removal

of the spray Head (23A). To remove the Spray Head (23A), hold metal Hose Fitting

(23B) and turn the Spray Head (23A) counterclockwise.

21A

21B

21C

22B

22A

20A

18A

19A

23B

HOT

COLD

19A

19B

23A